[UniFi Network Controller] [ 7.4.156 ] Wi-Fi/Device Management

[QNAP_Stephane]

better read documentation

only management port is changed compared a standard use

[DJKek]

QNAP_Stephane - Are there something I need to do to get it to work from L2?
I had it to work with my docker, but when I´m trying to use this, it wouldn't let me get in touch with my devices on L2.

[QNAP_Stephane]

No idea

Envoyé de mon MI 9 en utilisant Tapatalk

[QNAP_Stephane]

updated

[shahzadahmed]

Hiya, Apologies, I'm quite new to all this. Trying to migrate my Unifi controller from laptop to QNAP. I installed QJDK8, then installed QPKG Unifi 5.12.35.0. When I launch, I get to the controller page which asks you to either chose a new controller name, or restore from backup. All great up to this point, then when I select the backup .unf file, everything goes south. The app stops responding, after which when I try and go into the app, I can no longer reach Qnap-ip:38190

I'm pretty sure that the problem is related to the restoration of the backup file, because if I just create a new controller, it all works fine, except I'd have to hard re-set all my unification devices to then re-adopt them. Anyone had a similar issue? I've tried various searches on the forums and google, but saw no solutions.

My set-up:
Qnap TS-253A
USG, switch, 3APs

Any help would be greatly appreciated.

Thanks in advance

[ccolotti]

Silly question about the QNAP Club package. Unifi uses 8080 for set-inform. I assume this means you must change your default QNAP web management port for it to work? There is no documentation on that in the QNAP Club, but since it is sharing the same IP and the management port is moved from 8443 this seems to be a requirement to alter the native 8080 for QNAP management if I am not mistaken.

[QNAP_Stephane]

Silly question about the QNAP Club package. Unifi uses 8080 for set-inform. I assume this means you must change your default QNAP web management port for it to work? There is no documentation on that in the QNAP Club, but since it is sharing the same IP and the management port is moved from 8443 this seems to be a requirement to alter the native 8080 for QNAP management if I am not mistaken.

it is modified inside package, no needed to modify QTS port anymore

[dsanow92]

I was running this qpkg but version 5.11.??. I updated to this version but I can not longer connect to my CloudKey software. It's been a while but what am I missing? The icon is redirecting me to 192,xxx.xxx:38193 which was the address before not it doesn't work now.

I have tried both x86 and x86_64. The both installed correctly but neither of them worked & the ARM one doesn't install.

Yes I know it's running, I have stopped and started the program a few times, and waited a long time to try and connect again.

Here is my system information
Model:TS-251+
Current firmware version:4.4.1.1216
Date:2020/02/14


Any other thoughts?
Thanks for the help


***NEW QJDK8 and 5.12.66.0 INSTALL FIXED IT**

[QNAP_Stephane]

updated

[infernalaanger]

I was running this qpkg but version 5.11.??. I updated to this version but I can not longer connect to my CloudKey software. It's been a while but what am I missing? The icon is redirecting me to 192,xxx.xxx:38193 which was the address before not it doesn't work now.

I have tried both x86 and x86_64. The both installed correctly but neither of them worked & the ARM one doesn't install.

Yes I know it's running, I have stopped and started the program a few times, and waited a long time to try and connect again.

Here is my system information
Model:TS-251+
Current firmware version:4.4.1.1216
Date:2020/02/14


Any other thoughts?
Thanks for the help


***NEW QJDK8 and 5.12.66.0 INSTALL FIXED IT**

I am also experiencing the same issue.

***EDIT***Uninstalling the newest version of QJDK8 and reinstalling fixed it

[Globier]

I'm also having the same issue.

I have:
Upgrade to Unifi 5.12.66.0 from https://www.qnapclub.eu/en/qpkg/394
Have reinstalled QJDK8 1.8.241.1 from https://www.qnapclub.eu/en/qpkg/195

Have rebooted the NAS multiple times.

The apps say they are started.

Opening the apps opens a browser to https://192.168.20.241:38193/ but it never loads.

Any ideas?

[Globier]

Sorry, forgot my sys info:

Model:TS-869L
Current firmware version:4.3.4.1190

[Rar9]

Where to find the last x86 version for Unifi 5.12.66.0 for Qnap 4.2.26 ??
I only see ARM an x86x64 bit

[QNAP_Stephane]

updated

x86 version abbandonned due mongodb do not support x86 32bit anymore

[xandithegreat]

Hi everyyone,

have the same problem on TS 559pro ii.
Installed:
Oracle JDK8 Version 1.8.241.1
Unifi 5.12.72.0

Unifi starts new tab with http://[nasip]:38190

Result 'no connection'

Any suggestions?

Thanks in advance