[ Ubiquiti UniFi Video ] [ 3.10.13.0 ] Manages the UniFi Video Cameras and records video [ Beta ]
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
[ Ubiquiti UniFi Video ] [ 3.10.13.0 ] Manages the UniFi Video Cameras and records video [ Beta ]
Source : https://www.ubnt.com/unifi-video/unifi-nvr/
[ Beta Version - Adapted from Ubuntu 1604 package ] [ not Fully tested ]
Download x64 version
https://www.qnapclub.eu/fr/qpkg/498
Notes
QJDK8 as dependency
About :
The UniFi® Video software features an advanced UI and extensive feature set, including custom motion detection zones, event recordings, email alerts, live view monitoring, disk management and analytics.
Last edited by QNAP_Stephane on Thu Aug 06, 2020 6:40 pm, edited 10 times in total.
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 19
- Joined: Sun May 18, 2014 4:10 am
Re: [ Ubiquiti UniFi Video ] [ 3.9.11 ] Manages the UniFi Video Cameras and records video [ Beta ]
thanks so much, you are the best!
I already wrote it in the Unifi Controller thread.
Today morning the unifi controller and video worked. I did the QNAP security update and now both Apps wont run. Page does not exit my browsers say.
QDJK, Controller and Video uninstalled and installed without errors. No result. All the other Apps (pyload, plex, etc.) work without any problem.
Any hint?
edit: if I start it on the console it works
I already wrote it in the Unifi Controller thread.
Today morning the unifi controller and video worked. I did the QNAP security update and now both Apps wont run. Page does not exit my browsers say.
QDJK, Controller and Video uninstalled and installed without errors. No result. All the other Apps (pyload, plex, etc.) work without any problem.
Any hint?
edit: if I start it on the console it works
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ Ubiquiti UniFi Video ] [ 3.9.11 ] Manages the UniFi Video Cameras and records video [ Beta ]
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.1 ] Manages the UniFi Video Cameras and records video [ Beta ]
updated
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 19
- Joined: Sun May 18, 2014 4:10 am
Re: [ Ubiquiti UniFi Video ] [ 3.9.11 ] Manages the UniFi Video Cameras and records video [ Beta ]
works, never heard about this app, thx!QNAP_Stephane wrote: ↑Fri Nov 16, 2018 4:48 pm try to use SortMyQPKGs qpkg to sort entries insid qpkg.conf
https://www.qnapclub.eu/fr/qpkg/508
-
- Know my way around
- Posts: 244
- Joined: Tue Mar 30, 2010 8:30 pm
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.1 ] Manages the UniFi Video Cameras and records video [ Beta ]
Thanks a lot for the 3.9.11 update. My camera is now recognised and generally everything works fine. The only issue I have encountered is that when trying to change the system configuration an error is generated saying:
"Validation Failed. /share/CACHEDEV1_DATA/.qpkg/UnifiVideo/data/videos - path is not accessible. Please correct permisions or ownership and try again."
Addionally, or because of that error in saving, when trying to save the system configuration settings, I cannot get any change to the NVR name or more critically "time-based purging", or "space to keep settings" to actually stick.
I am guessing this is something due to the way qpkgs work and the paths they can access, or where their settings are stored, or the user they run as... but I don't have expertise in that sort of thing.
I do see some people encountering similar on Synology and dockers:
https://community.ubnt.com/t5/UniFi-Vid ... -p/2434285
https://community.ubnt.com/t5/UniFi-Vid ... 73#M106908
https://community.ubnt.com/t5/UniFi-Vid ... -p/2118930
https://www.reddit.com/r/Ubiquiti/comme ... _in_unifi/
Perhaps related to this?
"The most important thing to know on Linux is that the owner and group of anything UniFi Video will be reading/writing is "unifi-video"
https://community.ubnt.com/t5/UniFi-Vid ... 052#M90377
"Validation Failed. /share/CACHEDEV1_DATA/.qpkg/UnifiVideo/data/videos - path is not accessible. Please correct permisions or ownership and try again."
Addionally, or because of that error in saving, when trying to save the system configuration settings, I cannot get any change to the NVR name or more critically "time-based purging", or "space to keep settings" to actually stick.
I am guessing this is something due to the way qpkgs work and the paths they can access, or where their settings are stored, or the user they run as... but I don't have expertise in that sort of thing.
I do see some people encountering similar on Synology and dockers:
https://community.ubnt.com/t5/UniFi-Vid ... -p/2434285
https://community.ubnt.com/t5/UniFi-Vid ... 73#M106908
https://community.ubnt.com/t5/UniFi-Vid ... -p/2118930
https://www.reddit.com/r/Ubiquiti/comme ... _in_unifi/
Perhaps related to this?
"The most important thing to know on Linux is that the owner and group of anything UniFi Video will be reading/writing is "unifi-video"
https://community.ubnt.com/t5/UniFi-Vid ... 052#M90377
You do not have the required permissions to view the files attached to this post.
TS-451 [4 x 10TB WD Reds in Raid-5]
TS-239 Pro II [2 x 3TB in Raid-0]
pfSense router and Ubiquiti Unifi switches
Mac Minis, MacBook Pro, iPhones
TS-239 Pro II [2 x 3TB in Raid-0]
pfSense router and Ubiquiti Unifi switches
Mac Minis, MacBook Pro, iPhones
-
- New here
- Posts: 3
- Joined: Tue Nov 25, 2014 3:41 pm
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.1 ] Manages the UniFi Video Cameras and records video [ Beta ]
Im also facing this problem, any solution?occamsrazor wrote: ↑Tue Nov 20, 2018 5:48 pm Thanks a lot for the 3.9.11 update. My camera is now recognised and generally everything works fine. The only issue I have encountered is that when trying to change the system configuration an error is generated saying:
"Validation Failed. /share/CACHEDEV1_DATA/.qpkg/UnifiVideo/data/videos - path is not accessible. Please correct permisions or ownership and try again."
Addionally, or because of that error in saving, when trying to save the system configuration settings, I cannot get any change to the NVR name or more critically "time-based purging", or "space to keep settings" to actually stick.
unifi-video.jpg
I am guessing this is something due to the way qpkgs work and the paths they can access, or where their settings are stored, or the user they run as... but I don't have expertise in that sort of thing.
I do see some people encountering similar on Synology and dockers:
https://community.ubnt.com/t5/UniFi-Vid ... -p/2434285
https://community.ubnt.com/t5/UniFi-Vid ... 73#M106908
https://community.ubnt.com/t5/UniFi-Vid ... -p/2118930
https://www.reddit.com/r/Ubiquiti/comme ... _in_unifi/
Perhaps related to this?
"The most important thing to know on Linux is that the owner and group of anything UniFi Video will be reading/writing is "unifi-video"
https://community.ubnt.com/t5/UniFi-Vid ... 052#M90377
-
- Starting out
- Posts: 22
- Joined: Sat May 23, 2015 1:59 pm
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.1 ] Manages the UniFi Video Cameras and records video [ Beta ]
I am having the same issues,
Validation Failed, path is not accessible, please correct permissions or ownership.
I have tried to find the advanced folder permissions but have not had any success.
Thanks
Validation Failed, path is not accessible, please correct permissions or ownership.
I have tried to find the advanced folder permissions but have not had any success.
Thanks
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.1 ] Manages the UniFi Video Cameras and records video [ Beta ]
not sure which user it is neccessary to run with
i can make probably modification to make it work but needs more information,
i can make probably modification to make it work but needs more information,
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Know my way around
- Posts: 244
- Joined: Tue Mar 30, 2010 8:30 pm
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.1 ] Manages the UniFi Video Cameras and records video [ Beta ]
According to this post:
https://community.ubnt.com/t5/UniFi-Vid ... -p/2118930
It runs under user “unifi-video” ... but this is beyond my knowledge level.
https://community.ubnt.com/t5/UniFi-Vid ... -p/2118930
It runs under user “unifi-video” ... but this is beyond my knowledge level.
TS-451 [4 x 10TB WD Reds in Raid-5]
TS-239 Pro II [2 x 3TB in Raid-0]
pfSense router and Ubiquiti Unifi switches
Mac Minis, MacBook Pro, iPhones
TS-239 Pro II [2 x 3TB in Raid-0]
pfSense router and Ubiquiti Unifi switches
Mac Minis, MacBook Pro, iPhones
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.1 ] Manages the UniFi Video Cameras and records video [ Beta ]
i finnish some update and i take a look
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.1 ] Manages the UniFi Video Cameras and records video [ Beta ]
Hopefully 3.9.11.2 should fix the problem (I Hope )
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Know my way around
- Posts: 244
- Joined: Tue Mar 30, 2010 8:30 pm
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.1 ] Manages the UniFi Video Cameras and records video [ Beta ]
Thanks for the update. Am having some issues though I am afraid.....
- Updated from the qnapclub repo and restarted, the qpkg was installed but was not accessible from the GUI.
- Uninstalled and re-installed but same issue.
- Installed the qpkg manually and manged to get it running, got the camera adopted. The specific issue we had about the permissions did seem resolved - I was able to change the recordings path and the time-based purging without getting that error.
- But then after a while it stopped responding.
- Uninstalled and renstalled from the repo again, restarted the machine but the same problem - the GUI is not accessible. When I look at the activity monitor I do not see any unifi video process running at all.
...I am still doing some more testing, am hoping to resolve.... but this information just FYI.
TS-451 [4 x 10TB WD Reds in Raid-5]
TS-239 Pro II [2 x 3TB in Raid-0]
pfSense router and Ubiquiti Unifi switches
Mac Minis, MacBook Pro, iPhones
TS-239 Pro II [2 x 3TB in Raid-0]
pfSense router and Ubiquiti Unifi switches
Mac Minis, MacBook Pro, iPhones
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.2 ] Manages the UniFi Video Cameras and records video [ Beta ]
have something inside
/share/CACHEDEV1_DATA/.qpkg/UnifiVideo/logs/error.log
/share/CACHEDEV1_DATA/.qpkg/UnifiVideo/logs/error.log
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Know my way around
- Posts: 244
- Joined: Tue Mar 30, 2010 8:30 pm
Re: [ Ubiquiti UniFi Video ] [ 3.9.11.2 ] Manages the UniFi Video Cameras and records video [ Beta ]
I managed to get it all working again by installing the package manually, and got it set up with the camera recording. But it does not seem to survive a reboot of the QNAP machine.
Here you go, I hope it helps....QNAP_Stephane wrote: ↑Fri Jan 11, 2019 11:16 pm have something inside
/share/CACHEDEV1_DATA/.qpkg/UnifiVideo/logs/error.log
Code: Select all
1547222282.339 2019-01-11 15:58:02.339/GMT: ERROR Main: !!WARNING!! NVR was not shutdown properly in main
1547222282.621 2019-01-11 15:58:02.621/GMT: ERROR Unable to initialize keystores in main
java.io.FileNotFoundException: /opt/UnifiVideo/data/ufv-truststore (Permission denied)
at java.io.FileInputStream.open0(Native Method) ~[?:1.8.0_191]
at java.io.FileInputStream.open(FileInputStream.java:195) ~[?:1.8.0_191]
at java.io.FileInputStream.<init>(FileInputStream.java:138) ~[?:1.8.0_191]
at com.ubnt.airvision.service.auth.A.Ó00000(Unknown Source) ~[airvision.jar:?]
at com.ubnt.airvision.service.auth.A.Ô00000(Unknown Source) ~[airvision.jar:?]
at com.ubnt.airvision.service.auth.A.null(Unknown Source) ~[airvision.jar:?]
at com.ubnt.airvision.service.auth.A.o00000(Unknown Source) [airvision.jar:?]
at com.ubnt.common.super.super.<init>(Unknown Source) [airvision.jar:?]
at com.ubnt.common.super.super$$FastClassByGuice$$a2970313.newInstance(<generated>) [guice-3.0.jar:?]
at com.google.inject.internal.cglib.reflect.$FastConstructor.newInstance(FastConstructor.java:40) [guice-3.0.jar:?]
at com.google.inject.internal.DefaultConstructionProxyFactory$1.newInstance(DefaultConstructionProxyFactory.java:60) [guice-3.0.jar:?]
at com.google.inject.internal.ConstructorInjector.construct(ConstructorInjector.java:85) [guice-3.0.jar:?]
at com.google.inject.internal.ConstructorBindingImpl$Factory.get(ConstructorBindingImpl.java:254) [guice-3.0.jar:?]
at com.google.inject.internal.ProviderToInternalFactoryAdapter$1.call(ProviderToInternalFactoryAdapter.java:46) [guice-3.0.jar:?]
at com.google.inject.internal.InjectorImpl.callInContext(InjectorImpl.java:1031) [guice-3.0.jar:?]
at com.google.inject.internal.ProviderToInternalFactoryAdapter.get(ProviderToInternalFactoryAdapter.java:40) [guice-3.0.jar:?]
at com.google.inject.Scopes$1$1.get(Scopes.java:65) [guice-3.0.jar:?]
at com.google.inject.internal.InternalFactoryToProviderAdapter.get(InternalFactoryToProviderAdapter.java:40) [guice-3.0.jar:?]
at com.google.inject.internal.FactoryProxy.get(FactoryProxy.java:54) [guice-3.0.jar:?]
at com.google.inject.internal.SingleParameterInjector.inject(SingleParameterInjector.java:38) [guice-3.0.jar:?]
at com.google.inject.internal.SingleParameterInjector.getAll(SingleParameterInjector.java:62) [guice-3.0.jar:?]
at com.google.inject.internal.ConstructorInjector.construct(ConstructorInjector.java:84) [guice-3.0.jar:?]
at com.google.inject.internal.ConstructorBindingImpl$Factory.get(ConstructorBindingImpl.java:254) [guice-3.0.jar:?]
at com.google.inject.internal.ProviderToInternalFactoryAdapter$1.call(ProviderToInternalFactoryAdapter.java:46) [guice-3.0.jar:?]
at com.google.inject.internal.InjectorImpl.callInContext(InjectorImpl.java:1031) [guice-3.0.jar:?]
at com.google.inject.internal.ProviderToInternalFactoryAdapter.get(ProviderToInternalFactoryAdapter.java:40) [guice-3.0.jar:?]
at com.google.inject.Scopes$1$1.get(Scopes.java:65) [guice-3.0.jar:?]
at com.google.inject.internal.InternalFactoryToProviderAdapter.get(InternalFactoryToProviderAdapter.java:40) [guice-3.0.jar:?]
at com.google.inject.internal.InjectorImpl$4$1.call(InjectorImpl.java:978) [guice-3.0.jar:?]
at com.google.inject.internal.InjectorImpl.callInContext(InjectorImpl.java:1024) [guice-3.0.jar:?]
at com.google.inject.internal.InjectorImpl$4.get(InjectorImpl.java:974) [guice-3.0.jar:?]
at com.google.inject.internal.InjectorImpl.getInstance(InjectorImpl.java:1013) [guice-3.0.jar:?]
at com.ubnt.airvision.Main.o00000(Unknown Source) [airvision.jar:?]
at com.ubnt.airvision.Main.start(Unknown Source) [airvision.jar:?]
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) ~[?:1.8.0_191]
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) ~[?:1.8.0_191]
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) ~[?:1.8.0_191]
at java.lang.reflect.Method.invoke(Method.java:498) ~[?:1.8.0_191]
at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:243) [commons-daemon-1.0.15.jar:1.0.15]
TS-451 [4 x 10TB WD Reds in Raid-5]
TS-239 Pro II [2 x 3TB in Raid-0]
pfSense router and Ubiquiti Unifi switches
Mac Minis, MacBook Pro, iPhones
TS-239 Pro II [2 x 3TB in Raid-0]
pfSense router and Ubiquiti Unifi switches
Mac Minis, MacBook Pro, iPhones