[ TPLink Omada ] [ 5.9.31.0 ] configuring and managing your Omada EAPs

[dolbyman]

works fine here

qnapclub has sometimes issues with their cdn's ..try to change your location (vpn) or contact them(qnapclub) by email to let them know

[sraffa]

Thanks dolbyman, I wrote to qnapclub and now the download works also here.

[AndoriAvalonia]

It appears that 4.4.4 has just been released.

One minor issue I've found is that it won't download new firmware for my access points (2x EAP-225 and 1x EAP-225 Outdoor) and install it (either from the rolling upgrade option or manually triggering and update). It does allow you to upload the firmware from a PC and do the upgrade though. I'm running it on a TS-453A.

[shrinkingmedic]

I'm looking for qoolbox to update Omada for QNAP to 4.4.4.... Currently running 4.2.8.

Also, when Stephane releases 4.4.4, how WILL I update it and preserve settings? There doesn't seem to be an "update" option for the QPKG, and I don't want to lose everything every time there is a new release. What is the preferred, approved way of updating this package?

[kris.sg]

Hi latest package Omada v 4.4.6.0 have problem, when I update, the web page doesn't open.
When I downgrade to v 4.4.4.1 then web page work.

B.r
Kris

[Lugie]

Hi latest package Omada v 4.4.6.0 have problem, when I update, the web page doesn't open.
When I downgrade to v 4.4.4.1 then web page work.

B.r
Kris

I am installing the software for the first time and experience the same problem that the website is not working when you open Omada Controller Software. Did you find out why? I rather have the newest version of the software than an old one.

[SteveStation]

Hi
I had the same problem and found the solution and why this is happening on the latest version.
First the problem is that the installer of the last version is installing if the ports by default, and the old version is installing if the ports modified.
On version 4.4.4.1 is installed if the ports -- manage.http.port=18888, manage.https.port=18843, portal.http.port=18888, portal.https.port=18843.
And on the 4.4.6.0 is installed if the ports -- manage.http.port=8088, manage.https.port=8043, portal.http.port=8088, portal.https.port=8843
So if you have for example the app VirtualizationStation 3 installed, you already have the port 8088 port taken by the VirtualizationStation 3.
The solution is modifying the ports on omada for other ports or modifying the ports on the VirtualizationStation to another ports.
In my case i modified the ports on omada app.
what you need to do is go to the directory /share/CACHEDEV1_DATA/.qpkg/Omada4/tplink/EAPController/properties
and edit the file omada.properties if the ports that you want, in my case i have use the same ports of version 4.4.4.1.

[Lugie]

Hi
I had the same problem and found the solution and why this is happening on the latest version.
First the problem is that the installer of the last version is installing if the ports by default, and the old version is installing if the ports modified.
On version 4.4.4.1 is installed if the ports -- manage.http.port=18888, manage.https.port=18843, portal.http.port=18888, portal.https.port=18843.
And on the 4.4.6.0 is installed if the ports -- manage.http.port=8088, manage.https.port=8043, portal.http.port=8088, portal.https.port=8843
So if you have for example the app VirtualizationStation 3 installed, you already have the port 8088 port taken by the VirtualizationStation 3.
The solution is modifying the ports on omada for other ports or modifying the ports on the VirtualizationStation to another ports.
In my case i modified the ports on omada app.
what you need to do is go to the directory /share/CACHEDEV1_DATA/.qpkg/Omada4/tplink/EAPController/properties
and edit the file omada.properties if the ports that you want, in my case i have use the same ports of version 4.4.4.1.

Thank you for a very good explanation on why and how to fix it. Problem solved!

[GsmTracer]

where i can find omada.qpkg ? all the links are down none of them are working

[dolbyman]

QNAPclub is dead

You have to hope that QNAP_Stephane ports this project to the new repo

https://www.myqnap.org/

[QNAP_Stephane]

it will be but need time ... omada latest has issue with mongodb... i need to fix this issue first

[Vukojebac]

it will be but need time ... omada latest has issue with mongodb... i need to fix this issue first

Thanks @QNAP_Stephane

I also tried the mbentley/omada-controller Docker version in Container Station but could never get it configured.

[buzzbusy]

Hello
@QNAP_Stephane could you please send us a link to download the previous working version ?
(4.4 is ok for me but I cannot acheive to find the .qpkg file to download since qnapclub doesn't work anymore)
Thank you by advance

[stargoat]

it will be but need time ... omada latest has issue with mongodb... i need to fix this issue first

Thanks @QNAP_Stephane

I also tried the mbentley/omada-controller Docker version in Container Station but could never get it configured.

I tried that too but can't get it to show the login page

[QNAP_Stephane]

I know actuallly , impossible to fix the issue i am trying latest 5.7.x ... even with my mongodb package which work fine as standalone