[QPKG] openHAB - The open Home Automation Bus

This is the best place for community developers to publish their genius work. Your Apps enrich the QNAP Turbo NAS.
Post Reply
cwempe
Getting the hang of things
Posts: 60
Joined: Tue Apr 27, 2010 9:37 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by cwempe » Mon Oct 12, 2015 5:19 pm

As of now, I only use devices that have their own IP gateway.
- LIFX bulbs (wifi).
- OW-SERVER-ENET (for 1wire-devices)
- Onkyo AVR
- Netatmo weather station

But on the long term I will eventually use some kind of receivers.
And that will be the pont where QNAP is not the best solution.

Asparagus
New here
Posts: 5
Joined: Thu Oct 01, 2015 3:13 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by Asparagus » Mon Oct 19, 2015 8:45 pm

Hi, I have ordered a "Z-Wave ZME_UZB1 Me USB Stick für Windows/Linux" on amazon.de, but I have not jet tested it. I expect it to be delivered tomorrow. Then I will tell about my progress!
I hope it will just be plug & play otherwise I will be lost because I don't have a deep Linux background. We will see ...

User avatar
parkerc
Easy as a breeze
Posts: 267
Joined: Thu Oct 16, 2014 7:36 am
Location: Near London, England
Contact:

Re: [QPKG] openHAB - The open Home Automation Bus

Post by parkerc » Sun Oct 25, 2015 9:01 pm

How did you get on @Asparagus with the Z-Wave USB Stick
Model Name : QNAP TS-253be (16GB) & TS-453 Pro (8GB)
Firmware Version:: QTS Latest
OS Version : Apple iOS (iPad/Safari Browser)
Number & Type of HDDs : 2 WD Reds, 3TB each, in Raid 1
Website (When I have time) : http://www.nodecentral.co.uk

Asparagus
New here
Posts: 5
Joined: Thu Oct 01, 2015 3:13 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by Asparagus » Sat Oct 31, 2015 7:59 pm

Meanwhile I have plugged in the in the Z-Wave ZME_UZB1 Stick into my QNAP TS-219P, but to be honest I have no clue how to see if the Stick was recognised by the system.
A "dmesg" or "lsusb" doesn't show me any devices that look like a Z-Wave ZME_UZB1.

Does anyone know how to find out if the Stick was recognized by the system or how to configure it?

Dojokun
First post
Posts: 1
Joined: Wed Sep 23, 2009 1:25 am

Re: [QPKG] openHAB - The open Home Automation Bus

Post by Dojokun » Mon Nov 02, 2015 8:43 pm

Hello together,

I've installed JRE_ARM and the latest version 2.0.0-a1 successfully on my TS-419PII. But if I enter the configuration URL http://192.168.1.12:8080/start/index.html, I get an "access denied" message inside browser window. The same issue, if I use the latest 1.7??? version (with the other URL http://192.168.1.12:8080/smarthome.app?sitemap=demo).
Bildschirmfoto1.png


Who can help me?
You do not have the required permissions to view the files attached to this post.

Asparagus
New here
Posts: 5
Joined: Thu Oct 01, 2015 3:13 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by Asparagus » Fri Nov 13, 2015 4:23 am

BigBadWren wrote:Christoph...thanks! Installed the 1.7 qpkg, and it is working great. I also dropped HABmin on top of it (it is a web interface for managing openHAB, in case you haven't heard of it...https://github.com/cdjackson/HABmin) and got that working too...I see a lot of potential in this system...

All...are any of you running an Aeon Labs ZStick as part of your config? I had a heck of a time getting the QNAP (TS-251) to recognize it, and now that I have that working, I cannot figure out how to get opanHAB to recognize it. I have done everything I can think of to do to the binding, to no avail. If any of you have had luck with that particular piece of hardware, I would love some advice...

Thanks,
Greg


Hi BigBadWren, what have you done to get HABmin to work on your QNAP? I'm running a TS-219P and would like to install HABmin on it.

kristo
New here
Posts: 3
Joined: Wed Nov 25, 2015 8:10 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by kristo » Wed Nov 25, 2015 8:13 pm

Hi,

I just start with OpenHab on my Qnap TS-231 and after instalation i can not find directory share/MD0_DATA/.qpkg/openHAB
Is any one have this issue ?

sseige
New here
Posts: 4
Joined: Wed May 19, 2010 2:58 am

Re: [QPKG] openHAB - The open Home Automation Bus

Post by sseige » Thu Jan 21, 2016 6:47 pm

Hi Christoph,
Hi all openhab Users,

I just saw that the new openHAB version 1.8 and 2.0 beta has been released.

Has anyone already build the new QPKG?

Stefan

User avatar
QNAP_Stephane
Experience counts
Posts: 3141
Joined: Wed Mar 27, 2013 1:00 am

Re: [QPKG] openHAB - The open Home Automation Bus

Post by QNAP_Stephane » Thu Jan 21, 2016 10:46 pm

sseige wrote:Hi Christoph,
Hi all openhab Users,

I just saw that the new openHAB version 1.8 and 2.0 beta has been released.

Has anyone already build the new QPKG?

Stefan


i built it , but not published here, also cant say if it runs fine or not, it is using QJDK8 as dependency

http://www.forum-nas.fr/viewtopic.php?f=21&t=3255
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

sseige
New here
Posts: 4
Joined: Wed May 19, 2010 2:58 am

Re: [QPKG] openHAB - The open Home Automation Bus

Post by sseige » Fri Jan 22, 2016 6:58 pm

do you mean i have to install first jdk8 on my nas?
have you although build 2.0 beta?

Stefan

User avatar
QNAP_Stephane
Experience counts
Posts: 3141
Joined: Wed Mar 27, 2013 1:00 am

Re: [QPKG] openHAB - The open Home Automation Bus

Post by QNAP_Stephane » Sat Jan 23, 2016 1:22 am

just built stable, not the beta

yes you must instal QJDK8 before install the qpkg
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

User avatar
ForSSkieken
Getting the hang of things
Posts: 56
Joined: Thu Sep 25, 2008 2:48 am
Location: Wijnegem

Re: [QPKG] openHAB - The open Home Automation Bus

Post by ForSSkieken » Wed Jan 27, 2016 9:00 pm

Hi There,

I use a QNAP TL-869L and a Storage Pool.

QJDK8 isn't in the place above but in /share/CACHEDEV1_DATA/.qpkg/QJDK8

When I changed the file /share/CACHEDEV1_DATA/.qpkg/OpenHab/start.sh and replaced the line to
export JAVA=/opt/QJDK8/jre/bin/java into export JAVA=/share/CACHEDEV1_DATA/.qpkg/QJDK8/jre/bin/java it worked..

Thanks
============================================================================================
TS-869L [RAID 5] Thick Provisioning 1 volume 7 seagate ST3000DM001-1CH166

Running Firmware is Version 4.3.4 0644
---------------------------------------------------------------------------------------------------------------------------------
XigmaNas on HP ProLiant ML310 G5
3 PC's in Workgroup + 2 XBMC
============================================================================================

User avatar
QNAP_Stephane
Experience counts
Posts: 3141
Joined: Wed Mar 27, 2013 1:00 am

Re: [QPKG] openHAB - The open Home Automation Bus

Post by QNAP_Stephane » Wed Jan 27, 2016 9:04 pm

thanks for the notification

i may be forget update file should be /opt/QJDK8 indeed
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

inahas
New here
Posts: 2
Joined: Mon Oct 07, 2013 10:20 am

Re: [QPKG] openHAB - The open Home Automation Bus

Post by inahas » Sun Feb 21, 2016 4:31 pm

Thanks for doing this.

I'm just starting to get into OpenHAB and decided to go with OpenHAB2. I saw there is an alpha1 build up in the download directory and it installed fine on my TS-120.

However, OpenHAB has recently released an alpha2 build that uses Karafe as an OSGI container and I can't figure out how to safely "migrate' from a1 to a2. The directory structure and launch scripts have changed significantly. Are you planning to produce an a2 build or can you offer any tips on how I can do it myself (I'm a Java developer but not familiar with the QNAP nor the OpenHAB structure). TIA.

sseige
New here
Posts: 4
Joined: Wed May 19, 2010 2:58 am

Re: [QPKG] openHAB - The open Home Automation Bus

Post by sseige » Thu Mar 24, 2016 1:22 am

has anybody build an qpkg

openHAB 1.8.2 and openHAB 2.0 beta2 are now available

Post Reply

Return to “Community Apps”