[QPKG] openHAB - The open Home Automation Bus
-
- Getting the hang of things
- Posts: 60
- Joined: Tue Apr 27, 2010 9:37 pm
Re: [QPKG] openHAB - The open Home Automation Bus
As of now, I only use devices that have their own IP gateway.
- LIFX bulbs (wifi).
- OW-SERVER-ENET (for 1wire-devices)
- Onkyo AVR
- Netatmo weather station
But on the long term I will eventually use some kind of receivers.
And that will be the pont where QNAP is not the best solution.
- LIFX bulbs (wifi).
- OW-SERVER-ENET (for 1wire-devices)
- Onkyo AVR
- Netatmo weather station
But on the long term I will eventually use some kind of receivers.
And that will be the pont where QNAP is not the best solution.
-
- New here
- Posts: 5
- Joined: Thu Oct 01, 2015 3:13 pm
Re: [QPKG] openHAB - The open Home Automation Bus
Hi, I have ordered a "Z-Wave ZME_UZB1 Me USB Stick für Windows/Linux" on amazon.de, but I have not jet tested it. I expect it to be delivered tomorrow. Then I will tell about my progress!
I hope it will just be plug & play otherwise I will be lost because I don't have a deep Linux background. We will see ...
I hope it will just be plug & play otherwise I will be lost because I don't have a deep Linux background. We will see ...
- parkerc
- Easy as a breeze
- Posts: 314
- Joined: Thu Oct 16, 2014 7:36 am
- Location: Near London, England
- Contact:
Re: [QPKG] openHAB - The open Home Automation Bus
How did you get on @Asparagus with the Z-Wave USB Stick
Model Name : QNAP TS-253be (16GB) & TS-453D (16GB)
Firmware Version:: QTS Latest
OS Version : Apple iOS (iPad/Safari Browser)
Number & Type of HDDs : 2 x 3TB WD Reds, Raid 1 & 4 x 4TB WD Reds, Raid 5
Website (When I have time) : http://www.nodecentral.co.uk
Firmware Version:: QTS Latest
OS Version : Apple iOS (iPad/Safari Browser)
Number & Type of HDDs : 2 x 3TB WD Reds, Raid 1 & 4 x 4TB WD Reds, Raid 5
Website (When I have time) : http://www.nodecentral.co.uk
-
- New here
- Posts: 5
- Joined: Thu Oct 01, 2015 3:13 pm
Re: [QPKG] openHAB - The open Home Automation Bus
Meanwhile I have plugged in the in the Z-Wave ZME_UZB1 Stick into my QNAP TS-219P, but to be honest I have no clue how to see if the Stick was recognised by the system.
A "dmesg" or "lsusb" doesn't show me any devices that look like a Z-Wave ZME_UZB1.
Does anyone know how to find out if the Stick was recognized by the system or how to configure it?
A "dmesg" or "lsusb" doesn't show me any devices that look like a Z-Wave ZME_UZB1.
Does anyone know how to find out if the Stick was recognized by the system or how to configure it?
-
- First post
- Posts: 1
- Joined: Wed Sep 23, 2009 1:25 am
Re: [QPKG] openHAB - The open Home Automation Bus
Hello together,
I've installed JRE_ARM and the latest version 2.0.0-a1 successfully on my TS-419PII. But if I enter the configuration URL http://192.168.1.12:8080/start/index.html, I get an "access denied" message inside browser window. The same issue, if I use the latest 1.7??? version (with the other URL http://192.168.1.12:8080/smarthome.app?sitemap=demo). Who can help me?
I've installed JRE_ARM and the latest version 2.0.0-a1 successfully on my TS-419PII. But if I enter the configuration URL http://192.168.1.12:8080/start/index.html, I get an "access denied" message inside browser window. The same issue, if I use the latest 1.7??? version (with the other URL http://192.168.1.12:8080/smarthome.app?sitemap=demo). Who can help me?
You do not have the required permissions to view the files attached to this post.
-
- New here
- Posts: 5
- Joined: Thu Oct 01, 2015 3:13 pm
Re: [QPKG] openHAB - The open Home Automation Bus
Hi BigBadWren, what have you done to get HABmin to work on your QNAP? I'm running a TS-219P and would like to install HABmin on it.BigBadWren wrote:Christoph...thanks! Installed the 1.7 qpkg, and it is working great. I also dropped HABmin on top of it (it is a web interface for managing openHAB, in case you haven't heard of it...https://github.com/cdjackson/HABmin) and got that working too...I see a lot of potential in this system...
All...are any of you running an Aeon Labs ZStick as part of your config? I had a heck of a time getting the QNAP (TS-251) to recognize it, and now that I have that working, I cannot figure out how to get opanHAB to recognize it. I have done everything I can think of to do to the binding, to no avail. If any of you have had luck with that particular piece of hardware, I would love some advice...
Thanks,
Greg
-
- New here
- Posts: 3
- Joined: Wed Nov 25, 2015 8:10 pm
Re: [QPKG] openHAB - The open Home Automation Bus
Hi,
I just start with OpenHab on my Qnap TS-231 and after instalation i can not find directory share/MD0_DATA/.qpkg/openHAB
Is any one have this issue ?
I just start with OpenHab on my Qnap TS-231 and after instalation i can not find directory share/MD0_DATA/.qpkg/openHAB
Is any one have this issue ?
-
- New here
- Posts: 4
- Joined: Wed May 19, 2010 2:58 am
Re: [QPKG] openHAB - The open Home Automation Bus
Hi Christoph,
Hi all openhab Users,
I just saw that the new openHAB version 1.8 and 2.0 beta has been released.
Has anyone already build the new QPKG?
Stefan
Hi all openhab Users,
I just saw that the new openHAB version 1.8 and 2.0 beta has been released.
Has anyone already build the new QPKG?
Stefan
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [QPKG] openHAB - The open Home Automation Bus
i built it , but not published here, also cant say if it runs fine or not, it is using QJDK8 as dependencysseige wrote:Hi Christoph,
Hi all openhab Users,
I just saw that the new openHAB version 1.8 and 2.0 beta has been released.
Has anyone already build the new QPKG?
Stefan
http://www.forum-nas.fr/viewtopic.php?f=21&t=3255
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- New here
- Posts: 4
- Joined: Wed May 19, 2010 2:58 am
Re: [QPKG] openHAB - The open Home Automation Bus
do you mean i have to install first jdk8 on my nas?
have you although build 2.0 beta?
Stefan
have you although build 2.0 beta?
Stefan
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [QPKG] openHAB - The open Home Automation Bus
just built stable, not the beta
yes you must instal QJDK8 before install the qpkg
yes you must instal QJDK8 before install the qpkg
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
- ForSSkieken
- Getting the hang of things
- Posts: 61
- Joined: Thu Sep 25, 2008 2:48 am
- Location: Wijnegem
Re: [QPKG] openHAB - The open Home Automation Bus
Hi There,
I use a QNAP TL-869L and a Storage Pool.
QJDK8 isn't in the place above but in /share/CACHEDEV1_DATA/.qpkg/QJDK8
When I changed the file /share/CACHEDEV1_DATA/.qpkg/OpenHab/start.sh and replaced the line to
export JAVA=/opt/QJDK8/jre/bin/java into export JAVA=/share/CACHEDEV1_DATA/.qpkg/QJDK8/jre/bin/java it worked..
Thanks
I use a QNAP TL-869L and a Storage Pool.
QJDK8 isn't in the place above but in /share/CACHEDEV1_DATA/.qpkg/QJDK8
When I changed the file /share/CACHEDEV1_DATA/.qpkg/OpenHab/start.sh and replaced the line to
export JAVA=/opt/QJDK8/jre/bin/java into export JAVA=/share/CACHEDEV1_DATA/.qpkg/QJDK8/jre/bin/java it worked..
Thanks
============================================================================================
TS-869L [RAID 5] Thick Provisioning 1 volume 6* 4TB
---------------------------------------------------------------------------------------------------------------------------------
TrueNAS on DELL R520
3 PC's in Workgroup
============================================================================================
TS-869L [RAID 5] Thick Provisioning 1 volume 6* 4TB
---------------------------------------------------------------------------------------------------------------------------------
TrueNAS on DELL R520
3 PC's in Workgroup
============================================================================================
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [QPKG] openHAB - The open Home Automation Bus
thanks for the notification
i may be forget update file should be /opt/QJDK8 indeed
i may be forget update file should be /opt/QJDK8 indeed
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- New here
- Posts: 2
- Joined: Mon Oct 07, 2013 10:20 am
Re: [QPKG] openHAB - The open Home Automation Bus
Thanks for doing this.
I'm just starting to get into OpenHAB and decided to go with OpenHAB2. I saw there is an alpha1 build up in the download directory and it installed fine on my TS-120.
However, OpenHAB has recently released an alpha2 build that uses Karafe as an OSGI container and I can't figure out how to safely "migrate' from a1 to a2. The directory structure and launch scripts have changed significantly. Are you planning to produce an a2 build or can you offer any tips on how I can do it myself (I'm a Java developer but not familiar with the QNAP nor the OpenHAB structure). TIA.
I'm just starting to get into OpenHAB and decided to go with OpenHAB2. I saw there is an alpha1 build up in the download directory and it installed fine on my TS-120.
However, OpenHAB has recently released an alpha2 build that uses Karafe as an OSGI container and I can't figure out how to safely "migrate' from a1 to a2. The directory structure and launch scripts have changed significantly. Are you planning to produce an a2 build or can you offer any tips on how I can do it myself (I'm a Java developer but not familiar with the QNAP nor the OpenHAB structure). TIA.
-
- New here
- Posts: 4
- Joined: Wed May 19, 2010 2:58 am
Re: [QPKG] openHAB - The open Home Automation Bus
has anybody build an qpkg
openHAB 1.8.2 and openHAB 2.0 beta2 are now available
openHAB 1.8.2 and openHAB 2.0 beta2 are now available