[QPKG] openHAB - The open Home Automation Bus

This is the best place for community developers to publish their genius work. Your Apps enrich the QNAP Turbo NAS.
Post Reply
big_cent
New here
Posts: 8
Joined: Mon Oct 12, 2015 12:36 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by big_cent » Wed Feb 15, 2017 3:48 pm

I contacted help desk and they were very helpful (even gave me compiled driver to try with my system), but it didn't work anyway. So I ended up spending little more on Raspberry Pi and it works great for me. I now have a proper kernel with all drivers out of the box, apt package manager and I can now turn on power schedule on my NAS leaving Raspberry 24/7. If you have x86 NAS, that's a different case, so you might want to try help desk as well. Cheers!
QNAP TS431, firmware 4.3.4, kernel 3.2.26, arm7, Raid0

giopas
Been there, done that
Posts: 840
Joined: Thu Mar 26, 2015 12:36 am
Location: somewhere in EU

Re: [QPKG] openHAB - The open Home Automation Bus

Post by giopas » Wed Feb 15, 2017 4:29 pm

As I am noob on openhab, and home automation, can you please elaborate for me some use cases for it, thanks!

Sent from my A0001 using Tapatalk
Qnap TS-253Pro 16Gb RAM - Single Storage Pool: 2 WRed 4TB (RAID 1)
Qnap TS-453A 16Gb RAM - Single Storage Pool: 4 WRed 4TB (RAID 5)

BryceWilkins
Know my way around
Posts: 123
Joined: Mon Jun 21, 2010 5:39 am

Re: [QPKG] openHAB - The open Home Automation Bus

Post by BryceWilkins » Thu Feb 16, 2017 1:19 am

giopas wrote:As I am noob on openhab, and home automation, can you please elaborate for me some use cases for it, thanks!


Um...just Google it? Or look directly at the openHAB website?

giopas
Been there, done that
Posts: 840
Joined: Thu Mar 26, 2015 12:36 am
Location: somewhere in EU

Re: [QPKG] openHAB - The open Home Automation Bus

Post by giopas » Thu Feb 16, 2017 1:21 am

Thanks, I did it, but I am interested in your use case :-)
Qnap TS-253Pro 16Gb RAM - Single Storage Pool: 2 WRed 4TB (RAID 1)
Qnap TS-453A 16Gb RAM - Single Storage Pool: 4 WRed 4TB (RAID 5)

big_cent
New here
Posts: 8
Joined: Mon Oct 12, 2015 12:36 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by big_cent » Thu Feb 16, 2017 3:18 am

If you have it installed and working, http://docs.openhab.org/tutorials/beginner/index.html is a good place to get your feet wet.
QNAP TS431, firmware 4.3.4, kernel 3.2.26, arm7, Raid0

dexterweb
New here
Posts: 5
Joined: Thu Jun 12, 2008 12:44 am
Contact:

Re: [QPKG] openHAB - The open Home Automation Bus

Post by dexterweb » Tue Feb 21, 2017 3:55 pm

Hi all!
With a TS212 firmware 4.2.2 Build 20161214

I've installed Java for ARM, and openHAB 2.0.'0.0 package from
https://github.com/openhab/openhab-qnap-qpkg/releases

on app center openhab is active but if I click the icon I cannot see any webpage both with firefox and IE.

netstat -ntlu prompted:
tcp 8890 and 8444 are in listen mode as 8080

any hint on how to fix this?
maybe the problem with the package is that I have an ARM processor and a different version of java?
how can I debug this problem that is happening on thw different qnap nas?

thank you

User avatar
peelos
Easy as a breeze
Posts: 415
Joined: Sun Jun 26, 2016 9:28 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by peelos » Tue Apr 18, 2017 1:53 pm

Resurrecting this thread as I was surprised to see so little clear information on getting Openhab2 working on QNAP with Z wave when synology seems quite straightforward.

I found the OpenHAB instructions: http://docs.openhab.org/installation/qnap.html but no mention of required firmware, have opened an issue with the developer to confirm.

I see other threads that explain beta 4.3 is required for Z wave usb stick, but other than that this forum seems to be lacking information unfortunately.
TVS-1282-i7K-40G / 4 x 500Gb SSD 2.5" / 2 x 500Gb M.2 SSD / 8 x 4Tb WD Red / Corsiar H5-SF Watercooling / 3 x 80mm PWM Noctua fans / Corsair 600W PSU / Asus Turbo GTX 1060 6GB GPU

Norin
Know my way around
Posts: 104
Joined: Thu Nov 24, 2016 8:18 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by Norin » Fri May 12, 2017 10:44 am

Hi,

Everything is working out of the box.

Don´t install jdk8 you have to enable it, i suppose you have to write some sort of command to enable, so if you are a noob install JRE8, then install the git qpkg and off you go.

At least i can open it, lets see if i can add some addons to it and start playing with it in a user way.

Edit. x86_64, QTS 4.3.3
TS-453A

james061
First post
Posts: 1
Joined: Tue Jul 18, 2017 4:30 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by james061 » Tue Jul 18, 2017 4:33 pm

cwempe wrote:I created my first QPKG for the home automation solution openHAB.

Website: http://www.openhab.org/

What is openHAB?
openHAB is a software for integrating different home automation systems and technologies into one single solution that allows over-arching automation rules and that offers uniform user interfaces.

This means openHAB
  • is designed to be absolutely vendor-neutral as well as hardware/protocol-agnostic
  • can run on any device that is capable of running a JVM (Linux, Mac, Windows)
  • lets you integrate an abundance of different home automation technologies into one
  • has a powerful rule engine to fulfill all your automation needs
  • comes with different web-based UIs as well as native UIs for iOS and Android
  • is fully open source
  • is maintained by a passionate and growing community
  • is easily extensible to integrate with new systems and devices
  • provides APIs for being integrated in other systems



Download (v1.7.1 and older):
https://drive.google.com/folderview?id= ... aring#list



openHAB on Google Groups:
https://groups.google.com/d/msg/openhab ... N1kHT6POsJ


Any kind of feedback is welcome. :)

btw: I still don't know how to provide additional information (like description and screenshot) in the App Center.
http://forum.qnap.com/viewtopic.php?f=128&t=95233


Hello cwempe,
I sounds good. I downloaded it.
Please let me know that how can I use it ?

Thanks in advance
James

User avatar
peelos
Easy as a breeze
Posts: 415
Joined: Sun Jun 26, 2016 9:28 pm

Re: [QPKG] openHAB - The open Home Automation Bus

Post by peelos » Wed Sep 27, 2017 9:16 pm

resurrecting this thread, it looks like the developer of the OpenHAB QPKG is having issues with his NAS and is unable to continue development, there have been no updates since May:

https://github.com/openhab/openhab-qnap-qpkg/releases

I have raised a package request here on the forum, please do show your support for this on the thread!

viewtopic.php?f=321&t=136081&p=638162#p638162
TVS-1282-i7K-40G / 4 x 500Gb SSD 2.5" / 2 x 500Gb M.2 SSD / 8 x 4Tb WD Red / Corsiar H5-SF Watercooling / 3 x 80mm PWM Noctua fans / Corsair 600W PSU / Asus Turbo GTX 1060 6GB GPU

Post Reply

Return to “Community Apps”