exif tool(post optware)

Ask community developers’ help for your most wanted Apps and also discover what the hottest and ultimate Apps are.
Locked
vikjon0
Getting the hang of things
Posts: 85
Joined: Fri Jul 03, 2015 5:44 pm

exif tool(post optware)

Post by vikjon0 »

I can't manage to compile exif-tool from source and would appreciate either working instructions or a qpkg!
zyxmon
Experience counts
Posts: 1001
Joined: Mon Oct 27, 2014 2:27 pm
Location: Moscow, Russia
Contact:

Re: exif tool(post optware)

Post by zyxmon »

exif tool is a perl application. Entware has package (ipk) with exif tool.
The package name to install is - perl-image-exiftool
Instructions to install entware are here - http://forum.qnap.com/viewtopic.php?f=351&t=116737
giopas
Been there, done that
Posts: 855
Joined: Thu Mar 26, 2015 12:36 am
Location: somewhere in EU

Re: exif tool(post optware)

Post by giopas »

No need to compile it anymore then?
Qnap TS-253Pro 16Gb RAM - Single Storage Pool: 2 WRed 4TB (RAID 1)
Qnap TS-453A 16Gb RAM - Single Storage Pool: 4 WRed 4TB (RAID 5)
vikjon0
Getting the hang of things
Posts: 85
Joined: Fri Jul 03, 2015 5:44 pm

Re: exif tool(post optware)

Post by vikjon0 »

Thank you. Will try that.
I looked at a package list I found on the interweb with no luck, but perhaps not all entware are identical or I found an old list.
giopas
Been there, done that
Posts: 855
Joined: Thu Mar 26, 2015 12:36 am
Location: somewhere in EU

Re: exif tool(post optware)

Post by giopas »

This works (just did it):

Code: Select all

[~]# opkg install perl-image-exiftool
Qnap TS-253Pro 16Gb RAM - Single Storage Pool: 2 WRed 4TB (RAID 1)
Qnap TS-453A 16Gb RAM - Single Storage Pool: 4 WRed 4TB (RAID 5)
bigabe
New here
Posts: 2
Joined: Sat Sep 06, 2014 9:14 am

Re: exif tool(post optware)

Post by bigabe »

Just dropped by to say that after WAYYY longer than I'd like to admit mucking around with various Docker solutions ....
This was still the 20 second solution I was looking for.

So... you know... 'hello' from a half decade away.
Thanks
User avatar
OneCD
Guru
Posts: 12037
Joined: Sun Aug 21, 2016 10:48 am
Location: "... there, behind that sofa!"

Re: exif tool(post optware)

Post by OneCD »

* topic locked to prevent further necroposting *

ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage
Locked

Return to “Apps Wanted”