App not working: "authentication failed"
-
- Starting out
- Posts: 19
- Joined: Sat Nov 02, 2013 9:28 pm
App not working: "authentication failed"
I've been trying to use this app to connect to different WebDAV services. I have not been able to do so, when configuring a new account I keep getting "authentication failed".
What I've tested so far:
- tested credentials through both webbrowser and windows builtin drive mapping for WebDAV, both work flawlessly
- tried different account on WebDAV service
- tried different WebDAV service
- reboot NAS after installation
- reinstall qkpg
There must be some issue with the qpkg or somewhere else in my NAS setup. Does the qpkg have dependencies? Any other ideas what might be going on?
What I've tested so far:
- tested credentials through both webbrowser and windows builtin drive mapping for WebDAV, both work flawlessly
- tried different account on WebDAV service
- tried different WebDAV service
- reboot NAS after installation
- reinstall qkpg
There must be some issue with the qpkg or somewhere else in my NAS setup. Does the qpkg have dependencies? Any other ideas what might be going on?
-
- Starting out
- Posts: 19
- Joined: Sat Nov 02, 2013 9:28 pm
Re: App not working: "authentication failed"
Addition: if I look at the logs I find this entry quite a few times:
2015-10-31 13:39:28,842 PID:24996 configfile.py:96 cc DEBUG use default because conf is not exist /etc/config/cloudconnector/WebDAV/cloudconnector.admin.conf
On my QNAP there is no /etc/config/cloudconnector ...
I suspect this may be related but unsure how to fix this
2015-10-31 13:39:28,842 PID:24996 configfile.py:96 cc DEBUG use default because conf is not exist /etc/config/cloudconnector/WebDAV/cloudconnector.admin.conf
On my QNAP there is no /etc/config/cloudconnector ...
I suspect this may be related but unsure how to fix this
- interfaSys
- Starting out
- Posts: 48
- Joined: Thu Feb 12, 2009 10:24 pm
Re: App not working: "authentication failed"
Same problem here. App is junk, it just doesn't try to connect to the external service.
- pwilson
- Guru
- Posts: 22533
- Joined: Fri Mar 06, 2009 11:20 am
- Location: Victoria, BC, Canada (UTC-08:00)
Re: App not working: "authentication failed"
What type of device are you trying to use with WebDAV on the NAS?timag3 wrote:I've been trying to use this app to connect to different WebDAV services. I have not been able to do so, when configuring a new account I keep getting "authentication failed".
What I've tested so far:
- tested credentials through both webbrowser and windows builtin drive mapping for WebDAV, both work flawlessly
- tried different account on WebDAV service
- tried different WebDAV service
- reboot NAS after installation
- reinstall qkpg
There must be some issue with the qpkg or somewhere else in my NAS setup. Does the qpkg have dependencies? Any other ideas what might be going on?
Please review: When you're asking a question, please include the following.
Patrick M. Wilson
Victoria, BC Canada
QNAP TS-470 Pro w/ 4 * Western Digital WD30EFRX WD Reds (RAID5) - - Single 8.1TB Storage Pool FW: QTS 4.2.0 Build 20151023 - Kali Linux v1.06 (64bit)
Forums: View My Profile - Search My Posts - View My Photo - View My Location - Top Community Posters
QNAP: Turbo NAS User Manual - QNAP Wiki - QNAP Tutorials - QNAP FAQs
Please review: When you're asking a question, please include the following.
- interfaSys
- Starting out
- Posts: 48
- Joined: Thu Feb 12, 2009 10:24 pm
Re: App not working: "authentication failed"
In my case, it's ownCloud
-
- Starting out
- Posts: 19
- Joined: Sat Nov 02, 2013 9:28 pm
Re: App not working: "authentication failed"
The service I'm trying to connect to is STACK (https://www.transip.nl/stack/)
I've tried other WebDAV services as well just to test if the qpkg is working, but I get the same error above for all of the services even though I can connect to those same services through other means.
My NAS is a TS-439 running 4.2.0 build 20151023 with the latest version of the WebDAV Cloudbackup Station (1.1.364) software.
I've tried other WebDAV services as well just to test if the qpkg is working, but I get the same error above for all of the services even though I can connect to those same services through other means.
My NAS is a TS-439 running 4.2.0 build 20151023 with the latest version of the WebDAV Cloudbackup Station (1.1.364) software.
- pwilson
- Guru
- Posts: 22533
- Joined: Fri Mar 06, 2009 11:20 am
- Location: Victoria, BC, Canada (UTC-08:00)
Re: App not working: "authentication failed"
That doesn't answer my question.interfaSys wrote:In my case, it's ownCloud
Windows? IPad? Linux? OS X?
ownCloud's WebDAV works right out of the box for me under Linux.
Patrick M. Wilson
Victoria, BC Canada
QNAP TS-470 Pro w/ 4 * Western Digital WD30EFRX WD Reds (RAID5) - - Single 8.1TB Storage Pool FW: QTS 4.2.0 Build 20151023 - Kali Linux v1.06 (64bit)
Forums: View My Profile - Search My Posts - View My Photo - View My Location - Top Community Posters
QNAP: Turbo NAS User Manual - QNAP Wiki - QNAP Tutorials - QNAP FAQs
Please review: When you're asking a question, please include the following.
-
- Starting out
- Posts: 19
- Joined: Sat Nov 02, 2013 9:28 pm
Re: App not working: "authentication failed"
I am not sure what you're asking? I am trying to connect WebDAV Cloud Backupstation to an online service to be able to backup my NAS through that service. Which device do you mean?pwilson wrote:
What type of device are you trying to use with WebDAV on the NAS?
...
That doesn't answer my question.
Windows? IPad? Linux? OS X?
ownCloud's WebDAV works right out of the box for me under Linux.
- interfaSys
- Starting out
- Posts: 48
- Joined: Thu Feb 12, 2009 10:24 pm
Re: App not working: "authentication failed"
I think @pwilson did not understand the problem we're having. It doesn't matter where ownCloud is installed, the client (backupstation) just never connects to the outside service.
-
- New here
- Posts: 5
- Joined: Sun May 15, 2011 6:15 am
Re: App not working: "authentication failed"
I got the same authentication failed error when trying to connect to webdav of TransIP Stack service.timag3 wrote:The service I'm trying to connect to is STACK (https://www.transip.nl/stack/)
I've tried other WebDAV services as well just to test if the qpkg is working, but I get the same error above for all of the services even though I can connect to those same services through other means.
My NAS is a TS-439 running 4.2.0 build 20151023 with the latest version of the WebDAV Cloudbackup Station (1.1.364) software.
An errorlog would be helpfull to see what goes wrong....
-
- First post
- Posts: 1
- Joined: Mon Jul 08, 2013 10:58 pm
Re: App not working: "authentication failed"
Same here, authentication failed.
-
- New here
- Posts: 2
- Joined: Mon Nov 24, 2014 9:24 pm
Re: App not working: "authentication failed"
Hi,
it worked for a while, but after upgrading owncloud
i also got an auth failed on the account settings.
But the backup on daily base worked ...
in the owncloud Activitys i see the files that have been added,
but in the Folder they are not visible, but clickable....
so i think its an owncloud problem.
i use owncloud 8.1.3 stable.
the OC server is a hosted root server on Contabo.
Qnap TS-251 v4.2.0 with webdav backup 1.1.364
ottokar
it worked for a while, but after upgrading owncloud
i also got an auth failed on the account settings.
But the backup on daily base worked ...
in the owncloud Activitys i see the files that have been added,
but in the Folder they are not visible, but clickable....
so i think its an owncloud problem.
i use owncloud 8.1.3 stable.
the OC server is a hosted root server on Contabo.
Qnap TS-251 v4.2.0 with webdav backup 1.1.364
ottokar
-
- Starting out
- Posts: 19
- Joined: Sat Nov 02, 2013 9:28 pm
Re: App not working: "authentication failed"
After some digging it turns out that Transip have based their "Stack" storage service on a customized version of owncloud so there seems to be a compatibility issue between owncloud based WebDAV and the WebDAV cloud backup qpkg. I'll log a call with them to see if they can help.
-
- Starting out
- Posts: 19
- Joined: Sat Nov 02, 2013 9:28 pm
Re: App not working: "authentication failed"
I did some more digging but still cannot figure out what is going on. There seems to be a timeout happening somewhere but it doesn't occur when i connect through other means. I don't have any more ideas so I hope someone who has intimate knowledge of the qpkg or the pythonscripts underneath can help me further. I found some more detailed logs:
Code: Select all
2015-10-31 14:09:31,852 PID:29356 webdavconnector.py:442 cc ERROR test account fail
Traceback (most recent call last):
File "./package/src/shared/bin/connector/webdavconnector.py", line 439, in test_account
File "./package/src/shared/python-lib/easywebdav/client.py", line 392, in ls
File "./package/src/shared/python-lib/easywebdav/client.py", line 381, in _ls
File "./package/src/shared/python-lib/easywebdav/client.py", line 229, in _send
File "./package/src/shared/python-lib/easywebdav/client.py", line 188, in _request
OperationFailed: Failed to list directory "".
URL : https://replaced.com:443/remote.php/webdav/
Operation : PROPFIND
Expected code : 207 UNKNOWN, 301 Moved Permanently
Actual code : 408 Request Timeout
2015-10-31 14:09:31,861 PID:29356 commandmgr.py:251 cc ERROR (ConnectorAuthenticationError(...), -2002, 'of cloud storage authentication error. Please check your account settings')
Traceback (most recent call last):
-
- Starting out
- Posts: 21
- Joined: Tue Apr 21, 2015 3:15 am
Re: App not working: "authentication failed"
Did you connect Transip already?
I was corresponding with them and asked them about your finding about the different versions and they didn't know.
I was corresponding with them and asked them about your finding about the different versions and they didn't know.