Issue : INT MGMT Access

Q'center app, Helpdesk app
Post Reply
Foliolur
First post
Posts: 1
Joined: Fri Aug 04, 2017 3:16 pm

Issue : INT MGMT Access

Post by Foliolur »

Hi Everyone,

I have 2 TS-863U-RP in my company.
I used the first for File Server and the second for backup.

In the second server i used a iscsi connexion on debian linux with 3 port RJ45 in specific network and the last port is used for management for another network

Below plan connexion :
NAS Switch Cisco
ETH 1 NOK -------------------------------------------------------> NOK
192.168.0.91/24 192.168.0.250/24

ETH 2 | | ETH1
ETH 3 | Aggregation -------------------------------------------> Aggregation| ETH2 Debian Server
ETH 4 | Bound0 Bound0 | ETH3
10.1.1.1 10.1.1.3

So at the begining i've only setting 2 card for my bound port and 1 port for management. After the complete setting (for backup solution) i migrate the last port in my bound team.
Now the bound0 port connected on ISCSI with my debian server work fine (no problem). But i've no access to my management network 192.168.0.91

I tried to connect my laptop directly to the NAS with this config and it's ok (Ping : OK, WebUI : OK):
NAS My Laptop
ETH 1 ------------------------------------------------------------> ETH 1
192.168.0.91 192.168.0.92

So after that i setting the NAS in DHCP mode same problem QNAP not receive IP distributed by my CISCO ASA.
When i switch the link to my network Qfinder doesn't find the QNAP.
I already restart NAS, DEBIAN Server and My Switch
If i try a ssh connexion by debian with #ssh login@10.1.1.1 that's work fine
I don't know if i need to a route but i don't want setting the QNAP by linux config file i prefer used webinterface but i don't find route setting or other things

Have you encounter the same problem before ?
Thanks in advance
Post Reply

Return to “NAS Management”