I am having this issue now after a power failure. I cannot understand how to enter this using SSH. Do I enter each line, press enter then do the next line and so on until all 3 lines are entered? I have never used SSH before. I figured out how to logon to my QNAP using SSH. When I put these lines of code in it appears that nothing happens. Which part of the code would be the volume...."defVolMP"? Any clarification would be appreciated. Is it possible to provide instructions as if someone has never done this before?vel0x wrote: ↑Thu Jan 23, 2020 12:31 pm Had the same issue.
Somehow my default system volume was not set in the config.
Using SSH:Fixed it using (you may need to adjust this if you use a different volume as your system volume):Code: Select all
[/etc/config] # getcfg SHARE_DEF defVolMP -f /etc/config/def_share.info
After that it looked like this:Code: Select all
[/etc/config] # setcfg SHARE_DEF defVolMP -f /etc/config/def_share.info /share/CACHEDEV1_DATA
And the updates started working again after this.Code: Select all
[/etc/config] # getcfg SHARE_DEF defVolMP -f /etc/config/def_share.info /share/CACHEDEV1_DATA
Thanks