I activated the QuFirewall 1.2.0 and only allowed connections from Germany.
firewall1.PNG
Yesterday there were a lot of login attempts from other countries like south korea and china. Why are these attackers not blocked by firewall? I've checked the IP addresses in maxmind database
firewall2.PNG
After switching from Basic protection to Subnets only, the login attempts are blocked, but I cannot use my media server from outside my network.
firewall3.PNG
Is there an issue with geolocation in QuFirewall? Geo IP database version is up to date (20201230)
You do not have the required permissions to view the files attached to this post.
It may sound funny, but did you try to deactivate QuFirewall and then turn it back on?
Just today, I was experimenting with setting permissions for several countries, and I didn't have access. After I turned QuFirewall on/off, it started working
TVS-h1288X-W1250-128G (850W) + T3 card + QXG-10G1T + GIGABYTE RTX 4070 Ti Super Gaming OC 16G (Silent FW) + 2x 2TB M.2 NVMe Kingston KC3000 (RAID0 - apps, Qsync, VM's) + 12x 2,5“ 3,84TB SATA SSD Kingston DC600M (RAID5 - VM's, data). TVS-1282T3-i7-48G (450W) + QXG-10G1T + PALiT GeForce GTX 1660 Super GP OC + 2x 1TB M.2 NVMe ADATA SX8200PNP (RAID0 - apps) + 4x 2,5“ 3,84TB SATA SSD Samsung PM883 (RAID5 - data backup) + 8x 8TB Seagate IronWolf Pro (RAID6 - data backup). TS-677-16GB + 1x 256GB SSD Samsung EVO (apps) + 3x 8TB Seagate Exos (RAID0 - QVR Pro cameras recording)
Network stuff (priority use of 10GbE): QHora-301W, QSW-804-4C, ASUS XG-U2008 and TP-Link TL-SG1008MP. Protected by 2x APC CYBERFORT II 700VA.
I restarted the whole NAS Today I switched back to Basic protection including all access from Germany. I will wait if there are any more login attempts from Asia