Hi,
I have a QXG-10G2SF-CX4 plugged into a Qnap TS251-D and am trying to use a H! Fiber (AXS85-192-M3-Intel-2pcs-HF(EU)). Link is below.
It is being seen in UDM Pro as being connected, but with a 169 IP address. I had previously used H! Fiber transceiver in a desktop SFP+ card and no issues. Probably because the SFP+ card was from H! Fiber.
I am just looking to see what transceiver might work best. Know you will ask so here is the breakdown:
UDM-Network 6.5.55
UDM-Pro 1.11.0.3921
USW-Aggregation 5.76.7
https://www.amazon.com/gp/product/B07JG ... UTF8&psc=1
Thanks
Transceiver for QXG-10G2SF-CX4
- dolbyman
- Guru
- Posts: 35015
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Transceiver for QXG-10G2SF-CX4
You must have copy pasted this from another forum..the link is busted (shortened with"...")
-
- New here
- Posts: 4
- Joined: Thu Dec 17, 2020 9:13 am
Re: Transceiver for QXG-10G2SF-CX4
Thanks for replying. Not sure how much will the link will help, but with it getting a 169 IP address then I suspect there is a compatibility issue. There is no firewall or vlan issue in case anyone might be speculating that.
https://www.amazon.com/gp/product/B07JG ... UTF8&psc=1
https://www.amazon.com/gp/product/B07JG ... UTF8&psc=1