QNAP TS-231
Single Drive no RAID
Firmware 4.3.6.0993
I ran fsck from the Web gui and from the command line, in case there were file system errors due to a recent power outtage. Not sure where to go next.
mount the nfs share
Code: Select all
sudo mount -t nfs 192.168.0.99:SecureMedia /media/securemedia
Code: Select all
encfs /media/securemedia/enc ~/decrypted
Code: Select all
fusermount -u ~/decrypted
/media
Code: Select all
drwxrwxrwx 4 root root 4096 Oct 2 2016 securemedia
Code: Select all
drwxr-xr-x 5 farslayer farslayer 4096 Apr 1 2017 enc
Code: Select all
drwxr-xr-x 22 farslayer farslayer 4096 Feb 14 18:49 MyFiles
Code: Select all
linsecure read/write
Code: Select all
# NAS
192.168.20.20:/SecureMedia /media/securemedia nfs username=linsecure,password=<removed> 0 0
Code: Select all
192.168.0.99:SecureMedia /media/securemedia nfs rw,relatime,vers=3,rsize=32768,wsize=32768,namlen=255, hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.0.99,mountvers=3,mountport=30000,mountproto=udp,local_lock=none,addr=192.168.0.99 0 0
encfs /home/farslayer/decrypted fuse.encfs rw,nosuid,nodev,relatime,user_id=1000, group_id=1000,default_permissions 0 0
Code: Select all
:farslayer~/decrypted$ touch test.txt
touch: cannot touch 'test.txt': Read-only file system
root@debhome:/media/securemedia# touch test.txt
touch: cannot touch 'test.txt': Read-only file system
Code: Select all
[~] # /etc/init.d/services.sh stop
[~] # df -h
Filesystem Size Used Available Use% Mounted on
none 60.0M 46.3M 13.7M 77% /
devtmpfs 233.0M 12.0k 233.0M 0% /dev
tmpfs 64.0M 596.0k 63.4M 1% /tmp
tmpfs 239.6M 28.0k 239.6M 0% /dev/shm
tmpfs 16.0M 1.1M 14.9M 7% /share
/dev/md9 515.5M 283.8M 231.7M 55% /mnt/HDA_ROOT
cgroup_root 239.6M 0 239.6M 0% /sys/fs/cgroup
/dev/mapper/ce_cachedev1 2.6T 1.4T 1.3T 52% /share/CE_CACHEDEV1_DATA
/dev/md13 433.0M 326.5M 106.5M 75% /mnt/ext
tmpfs 16.0M 60.0k 15.9M 0% /share/CE_CACHEDEV1_DATA/.samba/lock/msg.lock
tmpfs 16.0M 0 16.0M 0% /mnt/ext/opt/samba/private/msg.sock
tmpfs 1.0M 0 1.0M 0% /mnt/rf/nd
[~] # umount /dev/mapper/ce_cachedev1
[~] # e2fsck -f -v -C 0 /dev/mapper/ce_cachedev1
e2fsck 1.42.13 (17-May-2015)
Pass 1: Checking inodes, blocks, and sizes
Inode 170786825 has INDEX_FL flag set on filesystem without htree support.
Inode 170789530 has INDEX_FL flag set on filesystem without htree support.
.
.
.
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
30543 inodes used (0.02%, out of 180699136)
7487 non-contiguous files (24.5%)
47 non-contiguous directories (0.2%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 21860/8439
376907002 blocks used (52.15%, out of 722776576)
0 bad blocks
2 large files
27798 regular files
2414 directories
0 character device files
0 block device files
0 fifos
0 links
317 symbolic links (231 fast symbolic links)
5 sockets
------------
30534 files
[~] # mount -t ext4 /dev/mapper/ce_cachedev1 /share/CE_CACHEDEV1_DATA
[~] # reboot
Thoughts ? Recommendations ?
Thanks for your assistance.