!!!Warning!!!: Update to Container Station 1.7 removed all containers

[giopas]

This morning Container Station worked again (blank, as I previously deleted all containers). I am trying to reinstall my preferred container (here) and we will see.

[vetctah]

ok I reinstalled CS as suggested and I don't see my containers in CS app, but I see them when I type "docker ps" command, any fix to this?

[xavierh]

no idea how to fix that... i ended up recreating my containers... lucky i did not lose their configuration

[pedrolces]

To resolve this, I installed the previous version of "Container Station" on the QNAP downloads website: "https://www.qnap.com/product_x_down/".

I did it from here: https://www.qnap.com/en-us/app_center/? ... at_choose=

The version I have downloaded has been: "Container Station 1.6.1714 (2016/10/13)".

I have installed it manually (in APP CENTER, icon with a "+" in the upper right).

Once installed, when I opened it for the first time, it asks me to select the folder for the containers, and I chose the one that already existed (contains folder: "container-station-data"). I selected to keep the previous settings.

And it works again normally.

[pfrench42]

I just got hit by this today, frustrating!!!

QNAP, please recall this release until you've got it migrating old containers correctly

[vetctah]

no idea how to fix that... i ended up recreating my containers... lucky i did not lose their configuration

do you see created containers in CS app? when I create new containers I don't see them in CS app, but like I mentioned before I see them when I use docker ps cli command

[timctrahan]

To resolve this, I installed the previous version of "Container Station" on the QNAP downloads website: "https://www.qnap.com/product_x_down/".

I did it from here: https://www.qnap.com/en-us/app_center/? ... at_choose=

The version I have downloaded has been: "Container Station 1.6.1714 (2016/10/13)".

I have installed it manually (in APP CENTER, icon with a "+" in the upper right).

Once installed, when I opened it for the first time, it asks me to select the folder for the containers, and I chose the one that already existed (contains folder: "container-station-data"). I selected to keep the previous settings.

And it works again normally.

This worked for me, reinstalling the older version. Quite the fuk up qnap!

[TheGuyNL]

Reverting to the old version fixed it too for me. Now I have my containers back This shouldnt happen though, bad on QNAP.

[xavierh]

i think that the issue is that the package does mention that a new share will be setup and that configuration is somehow getting messed up

[qnjb901]

Any easy way to back up containers on 1.6 and restore them on 1.7? Or has anyone been able to successfully upgrade while maintaining containers?

I'm eager to have gui access for configuring bridge mode too!

[xavierh]

I see my containers in the GUI but I only use host networking


Sent from my iPhone using Tapatalk Pro

[wernet]

Wow. This is a significant problem.

QNAP, please promptly pull 1.7 until fixed. This is too painful for too many.

Thanks,

Bill

[oyvindo]

The CS upgrade became available in my NAS yesterday, so obviously QNAP is still pushing it, but is there a way for me to find out exactly which version they are pushing (except install and try)?
I am now afraid to "try" because of all the horror stories listed in this thread....

[wernet]

Container Station 1.7.2224 ( 2017/02/23 ) still has the problem.

I was able to solve the problem using the method described by pedrolces above.

Bill

[oyvindo]

I updated to CS 1.7.2224 today after first upgrading QTS to 4.2.4 and everything worked just fine. All my containers were intact and are running after the upgrade.