Seagate Expansion 4Tb USB not recognised by front port on TS-673

Discuss and share your Seagate drive experience
Post Reply
acdsosys
New here
Posts: 2
Joined: Sat Dec 15, 2018 7:32 pm

Seagate Expansion 4Tb USB not recognised by front port on TS-673

Post by acdsosys » Sat Dec 15, 2018 8:01 pm

I'm new to this forum so apologies if this has been covered and my search didn't find it.

I have a QNAP TS-673 [4.3.5.0760] loaded with 6x 4Tb Seagate Ironwolf drives (Raid 6) and 2x Samsung 860 Evo M.2. (Raid 1) configured as cache.
I have a QNAP TS-451+ [4.3.6.0776] loaded with 4x 4Tb Seagate Ironwolf drives. This provides backup via RTRR for the TS-673.

I plan to use 2x Seagate 4Tb Expansion USB drives for external backup.

The TS-451+ has no problem recognising the USB drives plugged into the front port.

The TS-673 recognises the USB drives plugged into the back ports (shows size, is viewable in File manager, I've set up a Hybrid Backup) but point blank refuses to register them if they are plugged into the front port. I've tried both drives ;)

Is there a setting I'm missing somewhere?
Is this likely to be a firmware issue? It can't be hardware as the unit tells me there is an unrecognised USB device connected after a couple of minutes.

I could run a USB extension from the back but the whole point of the front USB is a 'simple one touch copy' method.

Any help gratefully received.

dolbyman
Guru
Posts: 15549
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Seagate Expansion 4Tb USB not recognised by front port on TS-673

Post by dolbyman » Sat Dec 15, 2018 11:39 pm

sounds like a bug..seen a similar issue in recent changelogs

report it to qnap via tticket

acdsosys
New here
Posts: 2
Joined: Sat Dec 15, 2018 7:32 pm

Re: Seagate Expansion 4Tb USB not recognised by front port on TS-673

Post by acdsosys » Sun Dec 16, 2018 12:10 am

thanks for the reply, ticket duly raised ;)

Post Reply

Return to “Seagate Drive Discussion”