IHM not available on 6TB Ironwolf

Discuss and share your Seagate drive experience
Post Reply
anagorny
New here
Posts: 2
Joined: Thu Jan 03, 2019 7:26 pm

IHM not available on 6TB Ironwolf

Post by anagorny » Thu Jan 03, 2019 7:34 pm

Hi all.

Recently bought and set up a TS-453B with 4x 6TB Seagate Ironwolf ST6000VN0033, which are listed as Ironwolf enabled by Seagate.

However, Ironwolf Health Management tab in the Disk Health utility shows "Ironwolf Health Management: Not Avaialble" for all 4 drives. Running the latest build of QTS (4.3.6). Search didn't product any results - help would be much appreciated!

Ron1963
Easy as a breeze
Posts: 374
Joined: Wed Apr 28, 2010 9:22 pm

Re: IHM not available on 6TB Ironwolf

Post by Ron1963 » Thu Jan 03, 2019 8:18 pm

My guess is you haven't run or scheduled the tests, like in this topic viewtopic.php?f=182&t=145431
1x TS431, 1x TS251, 1x TS253

anagorny
New here
Posts: 2
Joined: Thu Jan 03, 2019 7:26 pm

Re: IHM not available on 6TB Ironwolf

Post by anagorny » Thu Jan 03, 2019 8:44 pm

That did help, thanks so much for the fast reply!

Almost looks silly now but really wasn't obvious to me at the time :)

Similarly to that other topic, I've got lots of high 'raw values' in SMART for all 4 disks, but I guess that's not an issue as long as overall status is healthy?

Ron1963
Easy as a breeze
Posts: 374
Joined: Wed Apr 28, 2010 9:22 pm

Re: IHM not available on 6TB Ironwolf

Post by Ron1963 » Thu Jan 03, 2019 10:22 pm

Yep, that is my assumption as well.
1x TS431, 1x TS251, 1x TS253

Post Reply

Return to “Seagate Drive Discussion”