QNAP NAS Community Forum

Posted: **Thu Jan 03, 2019 7:34 pm**

Hi all.

Recently bought and set up a TS-453B with 4x 6TB Seagate Ironwolf ST6000VN0033, which are listed as Ironwolf enabled by Seagate.

However, Ironwolf Health Management tab in the Disk Health utility shows "Ironwolf Health Management: Not Avaialble" for all 4 drives. Running the latest build of QTS (4.3.6). Search didn't product any results - help would be much appreciated!

Posted: **Thu Jan 03, 2019 8:18 pm**

My guess is you haven't run or scheduled the tests, like in this topic viewtopic.php?f=182&t=145431

Posted: **Thu Jan 03, 2019 8:44 pm**

That did help, thanks so much for the fast reply!

Almost looks silly now but really wasn't obvious to me at the time

Similarly to that other topic, I've got lots of high 'raw values' in SMART for all 4 disks, but I guess that's not an issue as long as overall status is healthy?

Posted: **Thu Jan 03, 2019 10:22 pm**

Yep, that is my assumption as well.

QNAP NAS Community Forum

IHM not available on 6TB Ironwolf

IHM not available on 6TB Ironwolf

Re: IHM not available on 6TB Ironwolf

Re: IHM not available on 6TB Ironwolf

Re: IHM not available on 6TB Ironwolf