Seagate IronWolf 8TB (ST8000VN0022) with SC61 firmware not recognised by TS-231P

Discuss and share your Seagate drive experience
Post Reply
mgxma
New here
Posts: 3
Joined: Sun Jan 27, 2019 9:16 pm

Seagate IronWolf 8TB (ST8000VN0022) with SC61 firmware not recognised by TS-231P

Post by mgxma » Sun Jan 27, 2019 9:24 pm

Has anyone experienced any issues with Seagate IronWolf 8TB (ST8000VN0022) with SC61 firmware not being recognised by QNAP TS-231P? It kept saying the drives are missing even though they are on the QNAP official compatibility list for TS-231P (although the FW listed was SC60). This is very frustrating as I bought two of theses drives based on QNAP's official compatibility list and I'm unable to use them. Any help would be appreciated.

dolbyman
Guru
Posts: 15549
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Seagate IronWolf 8TB (ST8000VN0022) with SC61 firmware not recognised by TS-231P

Post by dolbyman » Sun Jan 27, 2019 11:21 pm

open a ticket with qnap

Ron1963
Easy as a breeze
Posts: 378
Joined: Wed Apr 28, 2010 9:22 pm

Re: Seagate IronWolf 8TB (ST8000VN0022) with SC61 firmware not recognised by TS-231P

Post by Ron1963 » Mon Jan 28, 2019 1:57 am

No problem using two of them with sc61 fw in a 251 and 253pro.
1x TS431, 1x TS251, 1x TS253

mgxma
New here
Posts: 3
Joined: Sun Jan 27, 2019 9:16 pm

Re: Seagate IronWolf 8TB (ST8000VN0022) with SC61 firmware not recognised by TS-231P

Post by mgxma » Mon Jan 28, 2019 1:55 pm

Ron1963 wrote:
Mon Jan 28, 2019 1:57 am
No problem using two of them with sc61 fw in a 251 and 253pro.
That's interesting because the QNAP compatibility list for TS-251 also shows SC60 firmware only. Can I ask which QTS version are you running on your TS-251? Mine is running version 4.3.6.0805.

mgxma
New here
Posts: 3
Joined: Sun Jan 27, 2019 9:16 pm

Re: Seagate IronWolf 8TB (ST8000VN0022) with SC61 firmware not recognised by TS-231P

Post by mgxma » Mon Jan 28, 2019 1:58 pm

dolbyman wrote:
Sun Jan 27, 2019 11:21 pm
open a ticket with qnap
I have already but QNAP support is not very responsive. Hope they will release a fix for this quickly.

Ron1963
Easy as a breeze
Posts: 378
Joined: Wed Apr 28, 2010 9:22 pm

Re: Seagate IronWolf 8TB (ST8000VN0022) with SC61 firmware not recognised by TS-231P

Post by Ron1963 » Mon Jan 28, 2019 5:01 pm

mgxma wrote:
Mon Jan 28, 2019 1:55 pm
Ron1963 wrote:
Mon Jan 28, 2019 1:57 am
No problem using two of them with sc61 fw in a 251 and 253pro.
That's interesting because the QNAP compatibility list for TS-251 also shows SC60 firmware only. Can I ask which QTS version are you running on your TS-251? Mine is running version 4.3.6.0805.
I'm also running 4.3.6.0805. The disk in my 251 is bought in nov 2016 and at time of installation the fw on the 251 was 4.2.2 build 02092016, so I guess the fw version is not relevant. Although chances both drives being DOA are slim have you checked them on a PC with the Seatools diagnostic program from Seagate?
1x TS431, 1x TS251, 1x TS253

User avatar
seagate_surfer
Starting out
Posts: 35
Joined: Sat Apr 01, 2017 4:29 am

Re: Seagate IronWolf 8TB (ST8000VN0022) with SC61 firmware not recognised by TS-231P

Post by seagate_surfer » Tue Jan 29, 2019 1:32 am

Hey OP. Sorry to hear you're experiencing trouble with your drive. Reading the other users' comments that they've not experienced the same issue with same QTS version and same model, it might be that you want to look into a potential RMA. Here's our Warranty & Replacements Page if you need it.
Seagate Technology | Official Forums Team

IronWolf Drives for NAS Applications
SkyHawk Drives for Surveillance Applications
BarraCuda Drives for PC and Gaming

Post Reply

Return to “Seagate Drive Discussion”