I have installed the latest IronWolf ST4000VN008 4TB (that has HM enabled) on my TS-251+ updated to latest firmware 4.3.6 (that has support for HM) and I can't let it recognize HM at all!!!
Have hit Test as mentioned here, and also the Rapid Test in Control Panel > Storage & Snapshots > Storage > Disks/VJBOD > Disk Health > Test , all on both disks...but still NO IronWolf Health: Not available!!!
What is this all about?!???
TS-251+ and IronWolf Health Management!!!!
- PIRATA!
- Know my way around
- Posts: 107
- Joined: Sun Feb 28, 2016 12:05 am
TS-251+ and IronWolf Health Management!!!!
QNAP TS-251+ with 2x Seagate IronWolf 4Tb (ST4000VN008)
- dolbyman
- Guru
- Posts: 35272
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-251+ and IronWolf Health Management!!!!
best to open a ticket with QNAP to find a reason
- PIRATA!
- Know my way around
- Posts: 107
- Joined: Sun Feb 28, 2016 12:05 am
Re: TS-251+ and IronWolf Health Management!!!!
Did it already...hope to receive info soon!!!
QNAP TS-251+ with 2x Seagate IronWolf 4Tb (ST4000VN008)
-
- Been there, done that
- Posts: 530
- Joined: Wed Apr 28, 2010 9:22 pm
Re: TS-251+ and IronWolf Health Management!!!!
On a Dutch forum it is mentioned that some newer Seagate Ironwolf drives are not compatible with the IHM implemented by QNAP.
1x TS251, 1x TS251D, 1x TS253
- PIRATA!
- Know my way around
- Posts: 107
- Joined: Sun Feb 28, 2016 12:05 am
Re: TS-251+ and IronWolf Health Management!!!!
I re-did my raid all from scratch from static to thin provisioning....and I don't know why now I see "Healthy"...so that they are recognized.
So...mysteries??
So...mysteries??
QNAP TS-251+ with 2x Seagate IronWolf 4Tb (ST4000VN008)
-
- New here
- Posts: 4
- Joined: Fri Jun 30, 2017 5:24 am
Re: TS-251+ and IronWolf Health Management!!!!
Did you get anywhere with support, I'm not about to rebuild my RAID?
I have a TS-451+ and put a ST8000VN0022 in it and happy to see IHM working, this was 18 months ago - a good reason to choose IronWolf over others.
But... bought another 8TB IronWolf last week and got the updated version ST8000VN004 and this does not give the option for IHM.
Clearly, the difference is with the drives. Perhaps Seagate have updated the IHM implementation and QNAP have to catch up but I doubt this, the earlier drive is on a later firmware SC61 when the newer drive is on SC60.
Either way, if Seagate are going to have sketchy vendor support then I'm going back to Reds to swap out the next 2 drives.
I have full-scanned the disk but IHM still does not appear as an option on that disk. I have open support tickets with Seagate and QNAP and updated to QTS 4.3.6.
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: TS-251+ and IronWolf Health Management!!!!
Please open a ticket with QNAP.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
-
- New here
- Posts: 4
- Joined: Fri Jun 30, 2017 5:24 am
Re: TS-251+ and IronWolf Health Management!!!!
Had already done that. Happy to say that so far the QNAP support has been to the point and prompt, worlds apart from the other end of this equation. Now looking at my log files - a firmware update, reboot and full disk scan have not made the IHM appear. It's now off to 2nd level support.
-
- First post
- Posts: 1
- Joined: Fri Feb 24, 2012 7:55 am
Re: TS-251+ and IronWolf Health Management!!!!
Hi, just wondering if you were able to sort the issue out with the ST8000VN004 with your QNAP please? I am looking to get ST8000VN004 too and my QNAP is P219 PII. Looking at the compatibility list on QNAP's website, it suggest that this model of HDD is compatible but then I came across your forum query.
Also your ST8000VN004 is resolved and you've kept the the unit, wondering what your thoughts are on this after using it for over a year since your pose please? Many thanks
Also your ST8000VN004 is resolved and you've kept the the unit, wondering what your thoughts are on this after using it for over a year since your pose please? Many thanks
- dolbyman
- Guru
- Posts: 35272
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-251+ and IronWolf Health Management!!!!
Forget about that in your 10 year old NAS ..that feature will never be implemented
and dont dig out old threads (necroposting)
and dont dig out old threads (necroposting)