In a TS-419P II with a RAID 5 1 Disk crash and I´m trying to replace it with a IronWolf 6TB ST6000VN0033 the light is green BUT in SMART i got Disk does not exist.
The disk is in the compatibility list
In some moment I got this in the Log: [Harddisk 1] I/O error, sense_key=0xb, asc=0x0, ascq=0x0, CDB=28 00 00 00 00 00 00 00 02 00 and the disk led indocator goes to red.
Any help is welcome
ST6000VN0033
- dolbyman
- Guru
- Posts: 35251
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: ST6000VN0033
I guess the old disk was not 6TB ?(as it would hit the 16TB volume ceiling on your device)
could be a DOA drive .. can you test it in a PC or SATA dock ?
what does
via ssh say ?
could be a DOA drive .. can you test it in a PC or SATA dock ?
what does
Code: Select all
cat /proc/mdstat
-
- New here
- Posts: 2
- Joined: Wed Aug 12, 2020 1:24 am
Re: ST6000VN0033
Thanks for your answer,
My QNAP was with 4 2TB Disks WD in RAID 5.
I'm new and try to test the disk but only have windows and with a external usb dock I can´'t see the disk.
Personalities : [raid1] [linear] [raid0] [raid10] [raid6] [raid5] [raid4]
md0 : active raid5 sdb3[1] sdd3[3] sdc3[2]
5855836800 blocks level 5, 64k chunk, algorithm 2 [4/3] [_UUU]
md4 : active raid1 sdd2[3](S) sdc2[2] sdb2[0]
530128 blocks super 1.0 [2/2] [UU]
md13 : active raid1 sdc4[0] sdd4[2] sdb4[1]
458880 blocks [4/3] [UUU_]
bitmap: 49/57 pages [196KB], 4KB chunk
md9 : active raid1 sdc1[0] sdd1[2] sdb1[1]
530048 blocks [4/3] [UUU_]
bitmap: 65/65 pages [260KB], 4KB chunk
unused devices: <none>
My QNAP was with 4 2TB Disks WD in RAID 5.
I'm new and try to test the disk but only have windows and with a external usb dock I can´'t see the disk.
Personalities : [raid1] [linear] [raid0] [raid10] [raid6] [raid5] [raid4]
md0 : active raid5 sdb3[1] sdd3[3] sdc3[2]
5855836800 blocks level 5, 64k chunk, algorithm 2 [4/3] [_UUU]
md4 : active raid1 sdd2[3](S) sdc2[2] sdb2[0]
530128 blocks super 1.0 [2/2] [UU]
md13 : active raid1 sdc4[0] sdd4[2] sdb4[1]
458880 blocks [4/3] [UUU_]
bitmap: 49/57 pages [196KB], 4KB chunk
md9 : active raid1 sdc1[0] sdd1[2] sdb1[1]
530048 blocks [4/3] [UUU_]
bitmap: 65/65 pages [260KB], 4KB chunk
unused devices: <none>
-
- Been there, done that
- Posts: 530
- Joined: Wed Apr 28, 2010 9:22 pm
Re: ST6000VN0033
Download and install Seatools for Windows, see https://www.seagate.com/support/downloa ... in-master/ If that program doesn't see the drive, it's without question DOA. If it does see the drive, run the long test. You probably need the outcome of that test anyway if you need to return.
1x TS251, 1x TS251D, 1x TS253