Currently have 4x4tb ST4000VN000. QNAP says the box can handle 10tb drives. I have 4 from upgrading another QNAP. But they are ST10000NM0086. Not listed as compatible on either the offical list or the wiki. My worry: only 2 of the 4 screw holes align. Advice greatly appreciated. (Yes, I have filed a request with QAP.)
Thanks,
Tony
TS419P II drive compatibiity quetion
- tonylima
- Getting the hang of things
- Posts: 55
- Joined: Tue Jan 17, 2012 7:43 am
- Location: Silicon Valley, CA
- Contact:
TS419P II drive compatibiity quetion
http://TonyLimaAssociates.com
Silicon Valley, CA
TS-419P II, TS-451+, TS-431P3, TS-832PX
Mostly Apple shop (vmWare Fusion when absolutely required)
Ricoh SP C360SFNw multifunction
Silicon Valley, CA
TS-419P II, TS-451+, TS-431P3, TS-832PX
Mostly Apple shop (vmWare Fusion when absolutely required)
Ricoh SP C360SFNw multifunction
- dolbyman
- Guru
- Posts: 35274
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS419P II drive compatibiity quetion
Old CAT1 NAS have a volume limit of 16TB, so you can only run those drives as single or in RAID1 pairs, so be aware
As long as two screw holes allign, it should be fine
As long as two screw holes allign, it should be fine
Last edited by dolbyman on Tue May 31, 2022 10:42 am, edited 1 time in total.
- tonylima
- Getting the hang of things
- Posts: 55
- Joined: Tue Jan 17, 2012 7:43 am
- Location: Silicon Valley, CA
- Contact:
Re: TS419P II drive compatibiity quetion
Terrific info. Many thanks.
http://TonyLimaAssociates.com
Silicon Valley, CA
TS-419P II, TS-451+, TS-431P3, TS-832PX
Mostly Apple shop (vmWare Fusion when absolutely required)
Ricoh SP C360SFNw multifunction
Silicon Valley, CA
TS-419P II, TS-451+, TS-431P3, TS-832PX
Mostly Apple shop (vmWare Fusion when absolutely required)
Ricoh SP C360SFNw multifunction