Hi I'm using a TS-228, I recently upgraded the HDD from 1TB to 2TB, but I there's a problem the capacity was still shown as 1TB, anybody knows how to fix it?
When I replaced the first HDD, in the middle I suddenly realized that at that day there would be an planned power cut out on that day, so I just shutdown the NAS in the middle of process, considering a shutdown is better than a power lost in the perspective of data lost possibility.
The next day I resumed the process it seems restarted from beginning. Now every thing looks OK except the capacity is still 1TB and I couldn't find anywhere to increase it.
A screen capture is attached here, click to enlarge.
upgraded HDD but capacity not increased
-
- New here
- Posts: 8
- Joined: Sun May 15, 2016 5:32 pm
upgraded HDD but capacity not increased
You do not have the required permissions to view the files attached to this post.
- dolbyman
- Guru
- Posts: 35275
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: upgraded HDD but capacity not increased
did you follow the guide ?.. telling the nas you replace the disks one by one ?
-
- New here
- Posts: 7
- Joined: Wed Sep 01, 2010 7:06 am
Re: upgraded HDD but capacity not increased
If the two drives are in a RAID you'll need to follow these steps: (as stated by dolbyman)
http://docs.qnap.com/nas/4.1/Home/en/in ... gement.htm
Cheers,
Andrew
http://docs.qnap.com/nas/4.1/Home/en/in ... gement.htm
Cheers,
Andrew