Plex allows you to aggregate all your personal media and access it anywhere you go. Enjoy your own media on all your devices with the Plex Media Server.
- Been there, done that
- Posts: 752
- Joined: Wed Mar 07, 2018 11:04 pm
- Location: 3rd World
Trexx wrote: ↑
Mon Mar 25, 2019 10:27 pm
The only way to do that will be that you have to manually edit the OVPN file from your VPN provider.
See this article for the basics around it:
https://www.reddit.com/r/PleX/comments/ ... h_openvpn/
Once you have the edited .OVPN file, then you can use that modified version and setup your VPN client on QNAP with it.
The reddit bit I followed and got it right I think except where to put it?
I put it at the very bottom (just pasted on the end) of the 2 ovpn I use and saved as new names.
They connected but Plex did not....
Tried on/off port forwarded - every option and combination I could come up with... failed.
Qnap TS-1277 1700
(48gb RAM) 6x8TB WD White, 2x8TB WD Red - Raid5
, 2x M.2 Crucial 1TB (Raid 1 VM),
2x SSD 860 EVO 500gb (Raid1 QTS), 2x SSD 860 EVO 250GB (Cache), 2x M.2 PCIe 970 500gb NVME (Raid1 Plex and Emby server)
Qnap TVS-1282 i7
(32GB RAM) 8x10TB WD White - Raid 6
, 2x M.2 Crucial 500gb (Raid1 VM),
2x SSD EVO 500gb (Raid1 QTS), 2x SSD EVO 250gb (Raid1 Cache), 2x M.2 PCIe Intel 512GB NVME (Raid1-Servers)
- 2x10,2x8,2x6 (Ironwolf) 2x6 (WD Red) - SHR
- 3x2TB WD Green, 2x3TB WD Red - Drobo Raid
- 2x2TB WD
ProBox 8 Bay USB3
- 8x4TB Seagate - JBOD
All software is updated as soon as it's available.
I give my opinion from my experience i.e. I have (or had) that piece of equipment/software and used it!