Plex not loading
-
- Starting out
- Posts: 31
- Joined: Wed Feb 10, 2021 9:38 pm
Plex not loading
I am on the home page of my locally hosted plex server. I am running version 1.23.4. I stopped it, then started it back up again, but it still doesn't load. It just shows a spinner.
- dolbyman
- Guru
- Posts: 35276
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Plex not loading
check your Plex logs to see whats going on
-
- Starting out
- Posts: 31
- Joined: Wed Feb 10, 2021 9:38 pm
Re: Plex not loading
I see this one a lot:
ERROR - Network Service: Error in browser handle read: 125 (Operation canceled) socket=-1
ERROR - Network Service: Error in browser handle read: 125 (Operation canceled) socket=-1
-
- Easy as a breeze
- Posts: 413
- Joined: Sun Oct 20, 2013 11:45 pm
- Location: Premnitz, Germany
Re: Plex not loading
You should post your logs on the plex-forum, usually you'll get there a specific hints what's wrong. Have you rebooted your NAS? I had some occasions where only this solved some issues leading to your described behavior.
NAS (production): TS-1635AX FW: QTS 5.1.4.2596 build 20231128
NAS (backup): TS-1635AX FW: QTS 5.1.4.2596 build 20231128
QTS (SSD): [RAID-1] 2 x 2TB Samsung Evo 860 M.2-Sata
Data (QTier): [RAID-6] 4 x 4TB Samsung 870 QVO Sata
Data (HDD): [RAID-6] 7 x 18TB Exos
RAM: 8 GB (QNAP shipped)
UPS: CyberPower CP900EPFCLCD
BACKUP: 10x4TB WD Red using a USB 3.0 Dock
Usage: SMB with rclone (encrypted)
NAS: TS-873U-RP FW: QTS 5.1.4.2596 build 20231128
Data (SSD): [RAID-10] 4 x 1TB Samsung Evo 860 Sata
RAM: 8 GB (QNAP shipped)
UPS: CyberPower PR2200ELCDRT2U
BACKUP: 4TB Synology DS214 FW: DSM 7.0.41890
Usage: SMB, Backup Domain Controller
NAS (backup): TS-1635AX FW: QTS 5.1.4.2596 build 20231128
QTS (SSD): [RAID-1] 2 x 2TB Samsung Evo 860 M.2-Sata
Data (QTier): [RAID-6] 4 x 4TB Samsung 870 QVO Sata
Data (HDD): [RAID-6] 7 x 18TB Exos
RAM: 8 GB (QNAP shipped)
UPS: CyberPower CP900EPFCLCD
BACKUP: 10x4TB WD Red using a USB 3.0 Dock
Usage: SMB with rclone (encrypted)
NAS: TS-873U-RP FW: QTS 5.1.4.2596 build 20231128
Data (SSD): [RAID-10] 4 x 1TB Samsung Evo 860 Sata
RAM: 8 GB (QNAP shipped)
UPS: CyberPower PR2200ELCDRT2U
BACKUP: 4TB Synology DS214 FW: DSM 7.0.41890
Usage: SMB, Backup Domain Controller
-
- Starting out
- Posts: 12
- Joined: Sat Jan 02, 2010 3:07 am
- Location: Denmark
Re: Plex not loading
I have the same issue..... updated plex to 1.23.4 in app center and then no connection to the server.....
Steffen Lav
Copenhagen, Denmark
TS-453A w/ 16GB RAM & 4*Segate SATA3 4TB ST8000VN000/NAS -- FW: QTS 4.3.3, Backup: QNAP TS-239 w/ 2GB RAM & 2 * Seagate SATA3 6TB ST6000VN000/NAS -- FW: QTS 4.2.3
Copenhagen, Denmark
TS-453A w/ 16GB RAM & 4*Segate SATA3 4TB ST8000VN000/NAS -- FW: QTS 4.3.3, Backup: QNAP TS-239 w/ 2GB RAM & 2 * Seagate SATA3 6TB ST6000VN000/NAS -- FW: QTS 4.2.3
- dolbyman
- Guru
- Posts: 35276
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Plex not loading
Just reboot the NAS and check again