I have two TR004 attached and QSirch does not indexes them. The path to these drives are in the "Excluded folders (system default)". There is no edit for those system paths.
I need to index those paths.
Any help please?
QNAP TR004 excluded by default in QSirch
-
- Starting out
- Posts: 21
- Joined: Fri Mar 04, 2016 12:34 am
- dolbyman
- Guru
- Posts: 35274
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TR004 excluded by default in QSirch
TR configured as pool or external storage ?
-
- Starting out
- Posts: 21
- Joined: Fri Mar 04, 2016 12:34 am
Re: QNAP TR004 excluded by default in QSirch
They are External storage
- dolbyman
- Guru
- Posts: 35274
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TR004 excluded by default in QSirch
Never used Qsirch .. but I could imagine external storage is by default not indexed. (Only internal volumes and pools)
-
- Starting out
- Posts: 21
- Joined: Fri Mar 04, 2016 12:34 am
Re: QNAP TR004 excluded by default in QSirch
Is there a way to make those external drives a Pool without reformating... Each of the drive has a lot of data on them and moving it around is quite an operation...
- dolbyman
- Guru
- Posts: 35274
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TR004 excluded by default in QSirch
no, but it sounds as if you don't have backups .. ALWAYS have backups of all important data (a RAID is not a backup)