log being too verbose

Introduce yourself to us and other members here, or share your own product reviews, suggestions, and tips and tricks of using QNAP products.
graemev
Starting out
Posts: 29
Joined: Sun Feb 12, 2012 10:17 pm

log being too verbose

Postby graemev » Wed Sep 27, 2017 2:47 pm

Just a single point. I suspect this message is simply too common to warrant 1: being a warning and 2: getting one for every occurrence

Type Date Time Users Source IP Computer name Content
Warning 2017/09/27 03:55:07 System 127.0.0.1 localhost [Media Library] Thumbnail generation failed (oversize): /share/MD0_DATA/Usb/2015/20150804/IMGP2614 - IMGP2630-sharp.jpg


I had to power cycle my NAS and I wanted to check the logs for the filesystem check (which is an info message) but I had to wade though many hundreds of these warning messages, which are errors abut a thumbnail I've probably never even seen.

User avatar
Toxic17
Experience counts
Posts: 3778
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: log being too verbose

Postby Toxic17 » Wed Sep 27, 2017 10:20 pm

it is probably trying to create a thumbnail from a corrupt image and thus warning you about the thumbnail creation.

either delete the offending image or fix the corruption.
Regards Simon

QTS 4.3/4.2 MANUAL

Submit a ticket - QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


Intel NUC DN2820FYKH - Debian 9.1 Stretch - CumulusMX 3.0.0 Build 3043
NAS: TVS-463/QM2-2P 4.3.3.0299 - TS-121 4.3.3.0299 - APC Back-UPS ES 700G
QPKG's: TwonkyMedia 8.4.1 - QApache 2.4.28.7110 - QSonarr 2.0.0.4949 - QNBZGet 19.1 - phpMyAdmin v4.7.4 - Piwigo 2.9.1 - Qmono 4.8.1.0
Network: VM Hub 3.0 (200/10) - Sophos UTM 9.503-4 - Ubiquiti CloudKey - UniFi AP AC Pro - TL-SG1016DE - Cisco SLM2008 - RPi 3(PiAware) - RPi 3(Dump1090-mutability)
Retiring - TS-459 Pro-2G 4.2.6 Build 20170729

graemev
Starting out
Posts: 29
Joined: Sun Feb 12, 2012 10:17 pm

Re: log being too verbose

Postby graemev » Thu Sep 28, 2017 4:01 am

Just got home to find 45 emails about these "thumbnails" . They are not corrupt , they are just rather large. The example above is 20134 X 5528 (111 MP) [ I have on printed over several metres on my wall]
The emails make these even more annoying. I'll get tagged as a spammer by ISP at this rate.

User avatar
Toxic17
Experience counts
Posts: 3778
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: log being too verbose

Postby Toxic17 » Thu Sep 28, 2017 4:20 am

maybe they cannot be created due to thumbnail needing to use more memory perhaps.

best submit a ticket with QNAP to see what they can suggest/fix
Regards Simon

QTS 4.3/4.2 MANUAL

Submit a ticket - QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


Intel NUC DN2820FYKH - Debian 9.1 Stretch - CumulusMX 3.0.0 Build 3043
NAS: TVS-463/QM2-2P 4.3.3.0299 - TS-121 4.3.3.0299 - APC Back-UPS ES 700G
QPKG's: TwonkyMedia 8.4.1 - QApache 2.4.28.7110 - QSonarr 2.0.0.4949 - QNBZGet 19.1 - phpMyAdmin v4.7.4 - Piwigo 2.9.1 - Qmono 4.8.1.0
Network: VM Hub 3.0 (200/10) - Sophos UTM 9.503-4 - Ubiquiti CloudKey - UniFi AP AC Pro - TL-SG1016DE - Cisco SLM2008 - RPi 3(PiAware) - RPi 3(Dump1090-mutability)
Retiring - TS-459 Pro-2G 4.2.6 Build 20170729

graemev
Starting out
Posts: 29
Joined: Sun Feb 12, 2012 10:17 pm

Re: log being too verbose

Postby graemev » Thu Sep 28, 2017 5:28 am

Perhaps the full email message makes it clearer:

Server Name: qnap412u
IP Address: 10.116.0.251
Date/Time: 2017/09/26 09:50:27
Level: Warning

[Media Library] Thumbnail generation failed (oversize): /share/MD0_DATA/Multimedia/usa2015/IMGP2578 - IMGP2594.tif.gimped.jpg

The word "oversize" is the clue ... I think it's just a fixed limit.

graemev
Starting out
Posts: 29
Joined: Sun Feb 12, 2012 10:17 pm

Re: log being too verbose

Postby graemev » Fri Oct 13, 2017 12:59 am

I raised a ticket. I can't actually view my own ticket as I seem to need a login to do that (which I didn't need to raise it? ??)

You can check the status of or update this ticket online at: https://helpdesk.qnap.com/index.php?/Ti ... -487-27127

User avatar
schumaku
Guru
Posts: 42646
Joined: Mon Jan 21, 2008 4:41 pm
Location: Kloten (Zurich), Switzerland -- Skype: schumaku
Contact:

Re: log being too verbose

Postby schumaku » Fri Oct 13, 2017 4:00 am

Unlikely - there is no public access to tickets:

Helpdesk no public access.PNG
You do not have the required permissions to view the files attached to this post.


Return to “Users' Corner”

Who is online

Users browsing this forum: No registered users and 2 guests