QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
-
- New here
- Posts: 8
- Joined: Sun Apr 03, 2016 4:37 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
I find it really weird the they STILL SELL and support the 451+ with this insane lpc bug. No recall, no hardware mitigation?
What if I buy it now?
What if I buy it now?
- dolbyman
- Guru
- Posts: 34903
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Then it might fail ...after the warranty is over of course.
The x51(+) and x53 is getting old anyways .. so unless you get it for a bargain you (or other customers) might want to look at newer models
The x51(+) and x53 is getting old anyways .. so unless you get it for a bargain you (or other customers) might want to look at newer models
-
- Starting out
- Posts: 32
- Joined: Tue Mar 08, 2016 4:19 am
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
I believe the LPC bug was due to manufacturing issue back in 2016/2017 ish, it was corrected, so newer and older models are not likely infected.
Dual QNAP TS-251+
- dolbyman
- Guru
- Posts: 34903
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
well....depends on how old the processors are the qnap build into their production runs
all unclear
all unclear
-
- New here
- Posts: 8
- Joined: Sun Apr 03, 2016 4:37 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Yeah, that's really too bad as it would be perfect for me otherwise - and I can get it for a bargain price. But I can't have an older NAS that's known to die after a while.
-
- First post
- Posts: 1
- Joined: Sun Aug 22, 2021 9:33 am
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Any solution to this? It just happened to me, can’t say I am happy if it was a known hardware issue abs they will not cover a fix
- dolbyman
- Guru
- Posts: 34903
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
What do you mean solution?..Have you read the posts?
-
- New here
- Posts: 3
- Joined: Fri Dec 18, 2015 4:50 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
This has just happened to my QNAP TS-453 Pro I have no previous experience of soldering or messing with capacitors or the like. Will this be an easy fix for someone like me?
- dolbyman
- Guru
- Posts: 34903
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Yes, and if you had read through it .. you would have also seen that dupont wires can fix it without any soldering at all
-
- New here
- Posts: 3
- Joined: Fri Dec 18, 2015 4:50 pm
- dolbyman
- Guru
- Posts: 34903
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
just google it .. and check pictures .. you will see
or even this method from the other thread (from a couple of minutes ago)
viewtopic.php?f=45&t=157459&start=90#p797439
or even this method from the other thread (from a couple of minutes ago)
viewtopic.php?f=45&t=157459&start=90#p797439
-
- New here
- Posts: 3
- Joined: Fri Dec 18, 2015 4:50 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Thank you really appreciateddolbyman wrote: ↑Sat Aug 28, 2021 7:48 am just google it .. and check pictures .. you will see
or even this method from the other thread (from a couple of minutes ago)
viewtopic.php?f=45&t=157459&start=90#p797439
-
- First post
- Posts: 1
- Joined: Sat Sep 04, 2021 11:26 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Another TS453 Pro failure here - QNAP wanted $320 for a warranty repair. It was 6 years old so will replace anyway.
However thanks to this thread and the contributors it is working again and only cost £4.49 plus I still have 99 resistors left .
Thank you
However thanks to this thread and the contributors it is working again and only cost £4.49 plus I still have 99 resistors left .
Thank you
You do not have the required permissions to view the files attached to this post.
-
- New here
- Posts: 6
- Joined: Mon Oct 05, 2015 6:17 am
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Same here $320 US for repair, yeah no. Soldered a 100 ohm resistor between pins 1 and 10 and back in business...just need to decide if to get a new QNAP or better luck with Synology.davidmt wrote: ↑Tue Sep 07, 2021 3:10 pm Another TS453 Pro failure here - QNAP wanted $320 for a warranty repair. It was 6 years old so will replace anyway.
However thanks to this thread and the contributors it is working again and only cost £4.49 plus I still have 99 resistors left .
Thank you
IMG_1803.JPG
-
- First post
- Posts: 1
- Joined: Fri Sep 24, 2021 8:40 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Fitted a 97 Ohm resistor to the LPC pads / port pads 1 and 10 and now back up working, will be interesting to see how long this works for. 1 pence fix and enjoyed taking the unit apart and rebiulding, lots of screws and none left over afterwards. BTW to add the resistor only case lid needs removing, hope this works for you also. Update 1 hour after the fix, unit booting again and updated to the latest firmware, got a new email from the unit warning the fan was not working. This message preceeded the unit going into the endless "System booting" mode, also getting lots of beeps, so time to make a backup while the unit is booted. For my system adding the resistor has the unit booting but is no longer stable.