Creating bootable USB
-
cosmoco2021
- First post
- Posts: 1
- Joined: Sat Oct 23, 2021 10:29 pm
Creating bootable USB
My QNAP TS-451 cannot boot after a firmware upgrade. I want to create a bootable USB drive so I can boot up from the USB and reapply the firmware upgrade to boot up normally. How do I create a bootable USB drive for TS-451 ? Thank You.
-
dolbyman
- Guru
- Posts: 35233
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Creating bootable USB
check the firmware recovery guide
-
Woody_ch
- New here
- Posts: 5
- Joined: Mon Oct 25, 2021 7:17 pm
Re: Creating bootable USB
BIG WARNING! Do NOT disable USB3 in the BIOS. Your QNAP will become unaccessible.
The knappix image (dsl linux) ist to outdated to support USB3. QNAP hast to upgrade that revocvery guied (for TS-x53-Pro at least)
The knappix image (dsl linux) ist to outdated to support USB3. QNAP hast to upgrade that revocvery guied (for TS-x53-Pro at least)
-
dolbyman
- Guru
- Posts: 35233
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Creating bootable USB
contact qnap support with this