I have a TS-453 Pro that I am retiring, My main NAS is a TS-453Be with a QNAP QM2-2S-220A Dual M.2 22110/2280 SATA SSD Expansion Card and 2 ssd in raid 0 and 4 WD RedPlus hdd. I want to migrate the drives and QM2 card to the new ts-453d I am getting. Can I just put the QM2 card and the 4 hdds straight into the 453D and expect it to work? I will have good backups to work from if there is a problem requiring me to start from scratch and erase all the drives, I can do that. I will relace my old 453 pro with the the 453Be so I won't need ssds in it.
Thanks,
Dale
Migrating from a ts-453Be to TS-453D
- deerhound
- Starting out
- Posts: 33
- Joined: Sun Dec 26, 2010 10:24 am
Migrating from a ts-453Be to TS-453D
TS-453D 4X WD40EFRX + 2X WD Red™ SA500 NAS SATA SSD M.2 2280 & TS-453Be 4XWD2002FFSX
- dolbyman
- Guru
- Posts: 35272
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Migrating from a ts-453Be to TS-453D
If the card is on the compatibility list and migration is supported (should be ..but check the migration guide website), it should work fine
- deerhound
- Starting out
- Posts: 33
- Joined: Sun Dec 26, 2010 10:24 am
Re: Migrating from a ts-453Be to TS-453D
Thanks, it looks like it should work, I hope so. I'll post with the results next week.
TS-453D 4X WD40EFRX + 2X WD Red™ SA500 NAS SATA SSD M.2 2280 & TS-453Be 4XWD2002FFSX
- deerhound
- Starting out
- Posts: 33
- Joined: Sun Dec 26, 2010 10:24 am
Re: Migrating from a ts-453Be to TS-453D
Just got done with migration. I updated firmware with no disks, the installed q card and Hdds, Booted right up with no data loss.
Recognized the stick of Crucial RAM 4GB DDR4 2400 MHz CL17 Laptop Memory CT4G4SFS824A from Amazon too.
Dale
Recognized the stick of Crucial RAM 4GB DDR4 2400 MHz CL17 Laptop Memory CT4G4SFS824A from Amazon too.
Dale
TS-453D 4X WD40EFRX + 2X WD Red™ SA500 NAS SATA SSD M.2 2280 & TS-453Be 4XWD2002FFSX