Does this allow me to access it on my WIFI router but keep it off the internet? Because that's what I want to do. If not, what's the best way to do that? I know very little about networking ins and outs.dolbyman wrote: ↑Sat Jan 22, 2022 6:09 am pretty easy .. people still expose their NAS units to WAN, as QNAP did and still does advertise these units as easy private clouds .. and *zapp* all data is gone ...
If you remove all port forwards to the NAS (and disable upnp) you will not be in trouble here
[RANSOMWARE] Qlocker
-
- New here
- Posts: 9
- Joined: Wed Jan 19, 2022 5:37 am
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
- dolbyman
- Guru
- Posts: 35248
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
Please elaborate what you mean by "access it on my wifi router"
Do you mean if the NAS would be available in your local LAN ? .. obviously other wise a NAS would be useless
Do you mean if the NAS would be available in your local LAN ? .. obviously other wise a NAS would be useless
-
- New here
- Posts: 3
- Joined: Sat Jan 22, 2022 6:40 am
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
Hi, did you get the right password after paying?rbharol wrote: ↑Sun Jan 09, 2022 4:04 pm Well, looks like they don't encrypt all files. In my case all Movies (MP4) and all music files were untouched. They probably know that people won't care about music.. It is the pictures and word and pdf documents that got encrypted. All those important ones.. I ended up paying them to get access after my recovery efforts failed.
-
- New here
- Posts: 9
- Joined: Wed Jan 19, 2022 5:37 am
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
Yes, that's what I mean. How do I basically turn off the outside internet, yet still access it at home without hardwiring it? I've always just had it set up to be on the internet.Thanks.
- dolbyman
- Guru
- Posts: 35248
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
internet access has nothing to do with wifi
-
- New here
- Posts: 9
- Joined: Wed Jan 19, 2022 5:37 am
- dolbyman
- Guru
- Posts: 35248
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
as said before
remove port forwarding and disable upnp (both in the router)
remove port forwarding and disable upnp (both in the router)
-
- New here
- Posts: 9
- Joined: Wed Jan 19, 2022 5:37 am
-
- New here
- Posts: 9
- Joined: Wed Jan 19, 2022 5:37 am
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
Okay, my Photorec finished, recovered over 500k files. When I go to run the next step, the qrescue.sh, it says, "/share/rescue/qpkg/QRescue/bin/qrescue.sh: line 26: /share/rescue/qpkg/QRescue/python_armhf/bin/python3: No such file or directory"
I can see that exists, how do I get it to find it?
I can see that exists, how do I get it to find it?
-
- Guru
- Posts: 13192
- Joined: Sat Dec 29, 2007 1:39 am
- Location: Stockholm, Sweden (UTC+01:00)
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
Because the only way to really protect your Qnap is to not directly expose it on the Internet. By that follow that your NAS will only be reachable from a secure local network and then there's no security advantage at all with changing from the default port. The most significant effect using a non-standard port would have is that it increases the risk for mistakes and confusion in the future.
If you have already changed port and have now gotten used to using that, then by all means don't change back but there's no security advantage with what you have.
RAID have never ever been a replacement for backups. Without backups on a different system (preferably placed at another site), you will eventually lose data!
A non-RAID configuration (including RAID 0, which isn't really RAID) with a backup on a separate media protects your data far better than any RAID-volume without backup.
All data storage consists of both the primary storage and the backups. It's your money and your data, spend the storage budget wisely or pay with your data!
A non-RAID configuration (including RAID 0, which isn't really RAID) with a backup on a separate media protects your data far better than any RAID-volume without backup.
All data storage consists of both the primary storage and the backups. It's your money and your data, spend the storage budget wisely or pay with your data!
-
- New here
- Posts: 3
- Joined: Sat Jan 22, 2022 6:40 am
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
Hi, hello which method did you use? the one from the qnap site or the other one?jaergo wrote: ↑Sat Jan 22, 2022 8:36 am Okay, my Photorec finished, recovered over 500k files. When I go to run the next step, the qrescue.sh, it says, "/share/rescue/qpkg/QRescue/bin/qrescue.sh: line 26: /share/rescue/qpkg/QRescue/python_armhf/bin/python3: No such file or directory"
I can see that exists, how do I get it to find it?
Thanks
-
- New here
- Posts: 9
- Joined: Wed Jan 19, 2022 5:37 am
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
The QNap one.
-
- New here
- Posts: 3
- Joined: Sat Jan 22, 2022 6:40 am
-
- Starting out
- Posts: 10
- Joined: Fri Dec 06, 2019 9:23 am
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
I'm currently going through a massive list of security precautions - this being one of them.dolbyman wrote: ↑Sat Jan 22, 2022 6:09 am pretty easy .. people still expose their NAS units to WAN, as QNAP did and still does advertise these units as easy private clouds .. and *zapp* all data is gone ...
If you remove all port forwards to the NAS (and disable upnp) you will not be in trouble here
Is there anything I'm missing here or has these sorted out the issue?
On my router:
https://i.ibb.co/4tJfxnd/Screenshot-202 ... 54-15.jpg
QNAP cloud settings:
https://i.ibb.co/gyNmrYp/Screenshot-202 ... -56-02.png
Service Discovery:
https://i.ibb.co/7rz309Z/Screenshot-202 ... -55-27.png
However I use plex so I have this ticked, is this okay?
https://i.ibb.co/wsQp26v/Screenshot-202 ... -57-11.png
Is this covering all basis? should I be safe technically speaking?
Forever enraged.
- jaysona
- Been there, done that
- Posts: 854
- Joined: Tue Dec 02, 2008 11:26 am
- Location: Somewhere in the Great White North
Re: [RANSOMWARE] 4/20/2021 - QLOCKER
Plex uses its own web server, you do not need to enable the QNAP DLNA server to use plex. Keep the QNAP DLNA server disabled.
RAID is not a Back-up!
H/W: QNAP TVS-871 (i7-4790. 16GB) (Plex server) / TVS-EC1080 (32Gig ECC) - VM host & seedbox
H/W: Asustor AS6604T (8GB) / Asustor AS7010T (16GB) (media storage)
H/W: TS-219 Pro / TS-509 Pro
O/S: Slackware 14.2 / MS Windows 7-64 (x5)
Router1: Asus RT-AC86U - Asuswrt-Merlin - 386.7_2
Router2: Asus RT-AC68U - Asuswrt-Merlin - 386.7_2
Router3: Linksys WRT1900AC - DD-WRT v3.0-r46816 std
Router4: Asus RT-AC66U - FreshTomato v2021.10.15
Misc: Popcorn Hour A-110/WN-100, Pinnacle Show Center 250HD, Roku SoundBridge Radio (all retired)
Ditched QNAP units: TS-269 Pro / TS-253 Pro (8GB) / TS-509 Pro / TS-569 Pro / TS-853 Pro (8GB)
TS-670 Pro x2 (i7-3770s 16GB) / TS-870 Pro (i7-3770 16GB) / TVS-871 (i7-4790s 16GB)
H/W: QNAP TVS-871 (i7-4790. 16GB) (Plex server) / TVS-EC1080 (32Gig ECC) - VM host & seedbox
H/W: Asustor AS6604T (8GB) / Asustor AS7010T (16GB) (media storage)
H/W: TS-219 Pro / TS-509 Pro
O/S: Slackware 14.2 / MS Windows 7-64 (x5)
Router1: Asus RT-AC86U - Asuswrt-Merlin - 386.7_2
Router2: Asus RT-AC68U - Asuswrt-Merlin - 386.7_2
Router3: Linksys WRT1900AC - DD-WRT v3.0-r46816 std
Router4: Asus RT-AC66U - FreshTomato v2021.10.15
Misc: Popcorn Hour A-110/WN-100, Pinnacle Show Center 250HD, Roku SoundBridge Radio (all retired)
Ditched QNAP units: TS-269 Pro / TS-253 Pro (8GB) / TS-509 Pro / TS-569 Pro / TS-853 Pro (8GB)
TS-670 Pro x2 (i7-3770s 16GB) / TS-870 Pro (i7-3770 16GB) / TVS-871 (i7-4790s 16GB)