Hello
NAS model: TS431
Firmware : 4.3.3. last update
Disk: 4 HD western digital 4TBx3 and 3TBx1
My nas ts431 since the update to 4.3.3 its always rebooting and says system was not shut down properly last time and flagging that my file system is not clean. I run file system scan like it says but happends again!
And other error problem(more frequently this one after last update this week) is that my system is like off but with all lights on, but not blinking except orange one(video above).
And is not possible to access to the Nas is like it was off. Only with force reboot via power button bring it to life again.
Look:
https://youtu.be/Q_cZVLJgAdk
Anybody can help me!!
Best regards
Problems after update to 4.3.3.
-
- Starting out
- Posts: 13
- Joined: Thu Sep 10, 2009 3:47 am
Re: Problems after update to 4.3.3.
I downgraded from 4.3.3.0188 to 4.3.3.0174 on my TS670Pro and this appears to have cured the rebooting problems.
-
- Know my way around
- Posts: 159
- Joined: Sat Jul 20, 2013 9:26 am
- Location: Australia
Re: Problems after update to 4.3.3.
Have you tried the newly released 4.3.3.0210 by any chance?
Primary: QNAP TS-h1283XU-RP w/ 10 x Seagate EXOS 16TB in RAID-TP
FW QuTS Hero H5.0.0.1949 / 32 GB ECC RAM / Built-in 10 Gig network
Backup #1: Synology RS3617XS+ w/ 10 x Hitachi Ultrastar 10TB in RAID 6
FW DSM 7.0.1-42218 Update 3 1 / 8 GB ECC RAM / Built-in 10 Gig network
Backup #2: QNAP TVS-863 w/ 8 x Hitachi Deskstar 6TB in RAID 6
FW 5.0.0 / 8 GB RAM / LAN-10G2T-X550
Ternary: 2 x QNAP TS-879U-RP w/ 8 x WDC Red 4TB in RAID 6
FW 4.3.6 / 32 GB ECC RAM /
Ternary: QNAP TS-470 Pro w/ 4 x WDC Red 4TB in RAID 6
FW 4.3.6 / 16 GB ECC RAM /
FW QuTS Hero H5.0.0.1949 / 32 GB ECC RAM / Built-in 10 Gig network
Backup #1: Synology RS3617XS+ w/ 10 x Hitachi Ultrastar 10TB in RAID 6
FW DSM 7.0.1-42218 Update 3 1 / 8 GB ECC RAM / Built-in 10 Gig network
Backup #2: QNAP TVS-863 w/ 8 x Hitachi Deskstar 6TB in RAID 6
FW 5.0.0 / 8 GB RAM / LAN-10G2T-X550
Ternary: 2 x QNAP TS-879U-RP w/ 8 x WDC Red 4TB in RAID 6
FW 4.3.6 / 32 GB ECC RAM /
Ternary: QNAP TS-470 Pro w/ 4 x WDC Red 4TB in RAID 6
FW 4.3.6 / 16 GB ECC RAM /