// IGNORE THIS POST. It's testing area for this megathread//changelog doubles up to list when a new subjects is "added" or, "updated" to denote when something changes. Seems a bit iffy to maintain a "added" only list for cleaner look, in addition to a separate updated changelog list. That is why i originally combined the 2 to a single changelog post. Bit too much work for me to maintain 2 separate listings. That said, here is how that would look like using a non changelog listing for subject titles. i added 3 different stylings for comparison. one with quote and one without.The third is direct url which i don't recommend//also testing changelog relocated to page1 in the first few early postsMegathread changelog//example1-added (page2) *credits schumaku
Code: Select all
How to enable SMB 3.0 on specific legacy qnap models *experimental
Code: Select all
https://forum.qnap.com/viewtopic.php?f=45&t=133965&start=15#p625820
//example2 - okay this looks nicer and probably the one i'd be using moving forward.-added (page5)
Code: Select all
are Budget GPUs Still bad? | RX550 VS GT1030
Code: Select all
https://forum.qnap.com/viewtopic.php?f=45&t=133965&start=60#p630274
//example3 - not practical due to the URL limit on forum postshow to translate language to communicate on the forum// the post below this point hasn't been edited using the new styling, other then to remove excess to keep it simple. The examples above these with 2 different stylings should be sufficient to illustrate how this would look like.-added (page1)
Code: Select all
What is the Difference between NAS, SAN and DAS
-added (page3)
-added (page3)
Code: Select all
What is SMB Multi-Channel? how does it help increase network speed throughput?
-added (page2)
-added (page5)
-added (page4) *credits to Schumaku
Code: Select all
How to access Qnap Nas via usb from desktop/laptop using quick access feature
-added (page4)
Code: Select all
How to hide Appcenter featured apps slider
-added (page4)
- added (page3)
Code: Select all
Moogle's 2017 qnap plex recommendation
- added (page2)
Code: Select all
32bit to 64bit compatibility checking for firmware upgrade
- added (page2)
Code: Select all
backup app alternatives for EOL models
- added (page4)
Code: Select all
How NetBIOS name resolution really works
-added (page2)
-added (page4)
Code: Select all
Moogle's crashplan docker recommendation for cloud backup solution
-added (page4)
Code: Select all
How to generate logs on a QNAP device using diagnostic tool
-added (page4)
Code: Select all
How to replace QNAP NAS PSU Power Supply Fail
-added (page2)
Code: Select all
How to use Private Internet Access proxy for Firefox
-added (page2) *thx to Toxic17
Code: Select all
How to change the raid scrub schedule beyond a month
-added (page1)
Code: Select all
Stream Movie from QNAP NAS to HDTV (DLNA Media Server)
-added (page4)
Code: Select all
Choosing the Right IP Camera for your QNAP NAS
-added
Important QTS Update for Potential Data Corruption on NAS Using RAID 5/6 *FIXED
- added
Code: Select all
How to recover using Netback Replicator & win 10 clean install
viewtopic.php?f=45&t=134423-added (page3)
Code: Select all
Why 10 Gigabit Ethernet? (Introducing 10 gigabit)
-added (page3)
-added (page1)
Code: Select all
M.2 vs NVME: What's the difference?
- added (page3)
Code: Select all
Building a Docker Media Server – Introduction
Code: Select all
Building a Docker Media Server – Hardware Selection
Code: Select all
Building a Docker Media Server – Configuring Your Network (Part 1)
Code: Select all
Building a Docker Media Server – Configuring Your Network (Part 2)
- added (page3)
Code: Select all
Building a Docker Media Server – Introduction
Code: Select all
Building a Docker Media Server – Hardware Selection
- added (page3)
- added (page2)
-added/replaced (page2)
- added (page3)
Code: Select all
Dummies guide for understanding the current SSD tech trend leading up to 2017
- added (page3)
-added (page2)
- added (page3)
- added (page3)
Code: Select all
How much ram do you need for your QNAP nas ?
- added (page3)
Code: Select all
swap memory usage is too high, what does this mean?
- added (page1)
Code: Select all
What is docker? why is it so popular
- added (page2)
Code: Select all
How to use DVDfab for TVS-882BR series optical drive ?
- added (page2)
Code: Select all
What is a VPN and why do I need one for my QNAP NAS
- added (page1)
Code: Select all
Why is storage pool capacity only 50% ? where did the rest wander off to?
-added (page2)
Code: Select all
Best way to test network and disk read/write performance?
[/quote]
- added (page2)
Code: Select all
How to calculate your raid 1/5/6/10 usable space
- added (page2)
- added (page2)
Code: Select all
how to test your network throughput for QNAP
- added (page2)
Code: Select all
Other user opinions regarding raid 5 vs raid 6 debate
- added to (page1)
Code: Select all
PLEX Media Server - QNAP Setup Guide
- added to (page2)
Code: Select all
Ryzen, what is it, why should i care?
- added
viewtopic.php?f=45&t=133965&p=625843&sid=26131f88d33700f52853867dfaaee0c1#p625843- added to (page1)
Code: Select all
What is VM, and Virtual Machine/virtualization? Why should i care?
- added to (page2)
// It does look nice and cleaner, however i still require adding commentary in changelog so people can keep track of edits in the megathread. Also keeping 2 separate listings, one for simple listings, and another for full changelogs is simply not practical for me to maintain, just too much work. Either can have 1 or the other but not definitely not both unless someone else wants to do the upkeep work for that. For now i'm leaning toward the current existing changelog system with commentary included. The added and updated tags should be good enough for people to know if it's referring to a new article, or whether an existing one was updated.=================Reserved==========================