QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
-
- First post
- Posts: 1
- Joined: Sun Jan 03, 2021 6:09 am
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Just for the record, 100 Ohms resistor trick "fixed" my Qnap TS-251 from 2015. Thanks for the hard work guys.
-
- New here
- Posts: 6
- Joined: Tue May 30, 2017 12:19 am
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
I am in the same situation as you.meerkat00 wrote: ↑Wed Jan 13, 2021 2:51 pm Wow - the 100 ohm resistor fix worked perfectly on my 5 year old 2 bay TS-251! Thanks all!
I want to replace it anyway, as I now don't trust it. But all the similar home models still use Atom or Celeron processors. Will they end up with the same failure eventually?
A $300-$400 NAS should last longer than 5 years. I checked Synology NAS's too, and it's the same with them (Atom & Celeron cpus).
I'm not willing to shut mine off when not in use, as it would be too much trouble to boot it up every time I wanted to use it, and it takes way too long.
And there is for example the synology ds1621+ which is animated by a ryzen, if intel scares you.
TS451 - 3*3To WD Red - Raid 5 - QTS 4.4.2.1310
-
- New here
- Posts: 5
- Joined: Wed Jan 13, 2021 10:05 am
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Nice! That would be overkill for my needs though.
-
- New here
- Posts: 3
- Joined: Thu Jan 14, 2021 12:50 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
I am in the same situation:
TS 653 Pro - I have ordered the resistor and hoping this will fix the issue
I also have a TS 451 - does anyone know if it may also have the issue
If i had to get another QNAP what models would be ok to get?
thank you in advance
TS 653 Pro - I have ordered the resistor and hoping this will fix the issue
I also have a TS 451 - does anyone know if it may also have the issue
If i had to get another QNAP what models would be ok to get?
thank you in advance
- dolbyman
- Guru
- Posts: 35035
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
x51 is also affected .. yes
-
- New here
- Posts: 3
- Joined: Thu Jan 14, 2021 12:50 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
@dolbyman thanks for your response. So in the end I will have two QNAPS with potential of failure. I am surprised no one launches a lawsuit against QNAP so we can all get some credit for all the money that was spent on these duds.
- dolbyman
- Guru
- Posts: 35035
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Feel free to investigate that with your legal council .. I don't have a unit with that issue
-
- New here
- Posts: 3
- Joined: Thu Jan 14, 2021 12:50 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Just got my resistors delivered and installed in which took 2 minutes. All is working fine! Thanks @yujungchang and the rest of the team
-
- Getting the hang of things
- Posts: 62
- Joined: Sun May 01, 2016 9:20 am
- Location: New Jersey, USA
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
This isn't just a Qnap issue. Any vendor that used the C2000 processor with this flaw would have/had this problem. It was fixed in later steppings.
This was an industry wide problem. Popular low power processor.
TS-431X2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5 Using 10GBE
TS-431X2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5 Using 10GBE
TS-431P2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5
TS-431P2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5
TVS-1282T QTS 4.5.4.2012- Static Vol 8 x 16TB Hdd Raid 6, Static Vol 4 X 8TB SSD Raid 5 Using 10GBE
TS-431X2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5 Using 10GBE
TS-431P2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5
TS-431P2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5
TVS-1282T QTS 4.5.4.2012- Static Vol 8 x 16TB Hdd Raid 6, Static Vol 4 X 8TB SSD Raid 5 Using 10GBE
-
- Starting out
- Posts: 26
- Joined: Tue Mar 12, 2019 3:54 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Hello everyone and congratulations on the forum.
Can this also be done with a TS-453Mini?
Thanks
Can this also be done with a TS-453Mini?
Thanks
- dolbyman
- Guru
- Posts: 35035
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
no need to congratulate on every other post ..(not even sure why at all)
open up your nas a check for the pins in question
open up your nas a check for the pins in question
-
- Starting out
- Posts: 26
- Joined: Tue Mar 12, 2019 3:54 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
I couldn't find them.
Could you tell me where the pins are?
Thanks
Could you tell me where the pins are?
Thanks
-
- First post
- Posts: 1
- Joined: Thu Jul 06, 2017 8:06 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
It works!
Back to business again.
Thanks for the help.
Back to business again.
Thanks for the help.
-
- First post
- Posts: 1
- Joined: Tue Jan 26, 2021 8:17 pm
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Hiya, just adding that the bug also affects the IS-453S which has an E3845 CPU. Similar failure scenario, sudden failure with no POST and as others have linked to the site with this CPU issue https://www.servethehome.com/another-at ... vli89-bug/
-
- Easy as a breeze
- Posts: 279
- Joined: Mon Jul 14, 2014 9:14 am
Re: QNAP TS-453 Pro stuck on "SYSTEM BOOTING"
Part of me wonders if this issue is why many NAS devices have had random crashes over the years. It has been about a month and no issues on my new NAS, even though the drives, data, and apps are the same (upgraded admittedly). But I was upgrading that NAS QTS for years.
Model name: TS-653D
Firmware version: 4.5.3.1697 build 20210611
Volumes: EXT4, Encrypted volume
Previous: TS-651 dead by CPU bug
Firmware version: 4.5.3.1697 build 20210611
Volumes: EXT4, Encrypted volume
Previous: TS-651 dead by CPU bug