seeking ARM CPU owners! Any QNAP firmware!
- OneCD
- Guru
- Posts: 12010
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: seeking ARM CPU owners! Any QNAP firmware!
Model list in the OP has been refreshed, added a few new ones, and removed the completed models.
EOL dates are now recorded in the spreadsheet attached to the OP. Models will automatically highlight in red when that date arrives.
EOL dates are now recorded in the spreadsheet attached to the OP. Models will automatically highlight in red when that date arrives.
-
- New here
- Posts: 2
- Joined: Mon Aug 07, 2017 2:21 am
Re: seeking ARM CPU owners! Any QNAP firmware!
TS-112P
Code: Select all
none
MARVELL_6281
armv5tel
- OneCD
- Guru
- Posts: 12010
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: seeking ARM CPU owners! Any QNAP firmware!
Hi and welcome to the forum.
Can you also please run the following command and post the result back here?
There's something odd about the x12P range. QNAP specs say these NAS have a 6282 CPU, but we've now had 2 reports that the QTS platform is revealed as 'MARVELL_6281'. Maybe QNAP are using 'MARVELL_6281' on NAS with either 6281 or 6282 CPUs?
Can you also please run the following command and post the result back here?
Code: Select all
cat /proc/cpuinfo
-
- Know my way around
- Posts: 164
- Joined: Thu Sep 20, 2007 8:11 pm
Re: seeking ARM CPU owners! Any QNAP firmware!
TS-212P
Code: Select all
[~] # cat /proc/cpuinfo
Processor name : Feroceon 88F6282 rev 1 (v5l) @ 1.6 GHz
BogoMIPS : 1587.60
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
CPU revision : 1
Hardware : Feroceon-KW ARM
Revision : 0000
Serial : 0000000000000000
Code: Select all
[~] # getcfg MISC DISPLAY_NAME -d none -f /etc/platform.conf; getcfg "" Platform -d none -f /etc/platform.conf; uname -m
none
MARVELL_6281
armv5tel
NAS:
QNAP TVS-682 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-351 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-509 Pro . . [Xeon L5408(SLBBT)] . . . . . . . . . . . . . . . FW: 4.2.6 Build 20200821 (2020-09-02) (TS-809 Pro)
QNAP TS-212P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 4.3.3.1432
QNAP TS-109 Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.3.3 build 1003 (2014-10-09)
QNAP QG-103N QGenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.2.3 (2018/08/10)
QNAP TVS-682 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-351 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-509 Pro . . [Xeon L5408(SLBBT)] . . . . . . . . . . . . . . . FW: 4.2.6 Build 20200821 (2020-09-02) (TS-809 Pro)
QNAP TS-212P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 4.3.3.1432
QNAP TS-109 Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.3.3 build 1003 (2014-10-09)
QNAP QG-103N QGenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.2.3 (2018/08/10)
- OneCD
- Guru
- Posts: 12010
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: seeking ARM CPU owners! Any QNAP firmware!
Excellent! Thank you.L3rd wrote: ↑Fri Mar 12, 2021 4:52 am TS-212P
Code: Select all
[~] # cat /proc/cpuinfo Processor name : Feroceon 88F6282 rev 1 (v5l) @ 1.6 GHz BogoMIPS : 1587.60 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Feroceon-KW ARM Revision : 0000 Serial : 0000000000000000
Code: Select all
[~] # getcfg MISC DISPLAY_NAME -d none -f /etc/platform.conf; getcfg "" Platform -d none -f /etc/platform.conf; uname -m none MARVELL_6281 armv5tel
-
- Know my way around
- Posts: 164
- Joined: Thu Sep 20, 2007 8:11 pm
Re: seeking ARM CPU owners! Any QNAP firmware!
Do you need the same also from the other models that I own?
OneCD wrote: ↑Fri Mar 12, 2021 4:55 amExcellent! Thank you.L3rd wrote: ↑Fri Mar 12, 2021 4:52 am TS-212P
Code: Select all
[~] # cat /proc/cpuinfo Processor name : Feroceon 88F6282 rev 1 (v5l) @ 1.6 GHz BogoMIPS : 1587.60 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Feroceon-KW ARM Revision : 0000 Serial : 0000000000000000
Code: Select all
[~] # getcfg MISC DISPLAY_NAME -d none -f /etc/platform.conf; getcfg "" Platform -d none -f /etc/platform.conf; uname -m none MARVELL_6281 armv5tel
NAS:
QNAP TVS-682 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-351 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-509 Pro . . [Xeon L5408(SLBBT)] . . . . . . . . . . . . . . . FW: 4.2.6 Build 20200821 (2020-09-02) (TS-809 Pro)
QNAP TS-212P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 4.3.3.1432
QNAP TS-109 Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.3.3 build 1003 (2014-10-09)
QNAP QG-103N QGenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.2.3 (2018/08/10)
QNAP TVS-682 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-351 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-509 Pro . . [Xeon L5408(SLBBT)] . . . . . . . . . . . . . . . FW: 4.2.6 Build 20200821 (2020-09-02) (TS-809 Pro)
QNAP TS-212P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 4.3.3.1432
QNAP TS-109 Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.3.3 build 1003 (2014-10-09)
QNAP QG-103N QGenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.2.3 (2018/08/10)
- OneCD
- Guru
- Posts: 12010
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: seeking ARM CPU owners! Any QNAP firmware!
Actually, to fill-in a blank space on the spreadsheet, are you able to please post the platform info for your TS-109 Pro?
Code: Select all
getcfg MISC DISPLAY_NAME -d none -f /etc/platform.conf; getcfg "" Platform -d none -f /etc/platform.conf; uname -m
-
- Know my way around
- Posts: 164
- Joined: Thu Sep 20, 2007 8:11 pm
Re: seeking ARM CPU owners! Any QNAP firmware!
TS-109 Pro
Code: Select all
getcfg MISC DISPLAY_NAME -d none -f /etc/platform.conf; getcfg "" Platform -d none -f /etc/platform.conf; uname -m
none
none
armv5tejl
Code: Select all
cat /proc/cpuinfo
Processor : ARM926EJ-Sid(wb) rev 0 (v5l)
BogoMIPS : 332.59
Features : swp half thumb fastmult
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant : 0x0
CPU part : 0x926
CPU revision : 0
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 32768
I assoc : 1
I line length : 32
I sets : 1024
D size : 32768
D assoc : 1
D line length : 32
D sets : 1024
Hardware : MV-88fxx81
Revision : 0000
Serial : 0000000000000000
NAS:
QNAP TVS-682 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-351 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-509 Pro . . [Xeon L5408(SLBBT)] . . . . . . . . . . . . . . . FW: 4.2.6 Build 20200821 (2020-09-02) (TS-809 Pro)
QNAP TS-212P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 4.3.3.1432
QNAP TS-109 Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.3.3 build 1003 (2014-10-09)
QNAP QG-103N QGenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.2.3 (2018/08/10)
QNAP TVS-682 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-351 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FW: 4.5.2.xxxx
QNAP TS-509 Pro . . [Xeon L5408(SLBBT)] . . . . . . . . . . . . . . . FW: 4.2.6 Build 20200821 (2020-09-02) (TS-809 Pro)
QNAP TS-212P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 4.3.3.1432
QNAP TS-109 Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.3.3 build 1003 (2014-10-09)
QNAP QG-103N QGenie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FW: 3.2.3 (2018/08/10)
- OneCD
- Guru
- Posts: 12010
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
- OneCD
- Guru
- Posts: 12010
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: seeking ARM CPU owners! Any QNAP firmware!
Decided to re-add the EOL units to the OP as it's possible someone out there is still using them.
-
- First post
- Posts: 1
- Joined: Fri Jan 31, 2014 4:28 am
Re: seeking ARM CPU owners! Any QNAP firmware!
TS-419P II
Code: Select all
getcfg MISC DISPLAY_NAME -d none -f /etc/platform.conf; getcfg "" Platform -d none -f /etc/platform.conf; uname -m
none
MARVELL_6281
armv5tel
Code: Select all
cat /proc/cpuinfo
Processor name : Feroceon 88F6282 rev 1 (v5l) @ 2 GHz
BogoMIPS : 1980.82
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
CPU revision : 1
Hardware : Feroceon-KW ARM
Revision : 0000
Serial : 0000000000000000
- OneCD
- Guru
- Posts: 12010
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
-
- New here
- Posts: 2
- Joined: Mon Aug 07, 2017 2:21 am
Re: seeking ARM CPU owners! Any QNAP firmware!
Sorry, no noticed your request until today.
TS-112P
TS-112P
Code: Select all
Processor name : Feroceon 88F6282 rev 1 (v5l) @ 1.6 GHz
BogoMIPS : 1587.60
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
CPU revision : 1
Hardware : Feroceon-KW ARM
Revision : 0000
Serial : 0000000000000000
OneCD wrote: ↑Mon Jan 18, 2021 3:11 am There's something odd about the x12P range. QNAP specs say these NAS have a 6282 CPU, but we've now had 2 reports that the QTS platform is revealed as 'MARVELL_6281'. Maybe QNAP are using 'MARVELL_6281' on NAS with either 6281 or 6282 CPUs?
Can you also please run the following command and post the result back here?Code: Select all
cat /proc/cpuinfo
- OneCD
- Guru
- Posts: 12010
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: seeking ARM CPU owners! Any QNAP firmware!
Thanks mate.
-
- First post
- Posts: 1
- Joined: Wed Nov 17, 2021 8:37 pm