[HOW TO] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
-
- Getting the hang of things
- Posts: 62
- Joined: Sun May 01, 2016 9:20 am
- Location: New Jersey, USA
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
Drchip. This a hardware failure. Would happen regardless of the firmware. Am glad it worked for you
TS-431X2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5 Using 10GBE
TS-431X2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5 Using 10GBE
TS-431P2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5
TS-431P2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5
TVS-1282T QTS 4.5.4.2012- Static Vol 8 x 16TB Hdd Raid 6, Static Vol 4 X 8TB SSD Raid 5 Using 10GBE
TS-431X2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5 Using 10GBE
TS-431P2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5
TS-431P2 QTS 4.4.3.1439 - Static Vol 4 x 8TB Hdd Raid 5
TVS-1282T QTS 4.5.4.2012- Static Vol 8 x 16TB Hdd Raid 6, Static Vol 4 X 8TB SSD Raid 5 Using 10GBE
-
- Starting out
- Posts: 26
- Joined: Tue Mar 12, 2019 3:54 pm
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
hello yujungchang, i did it !!
Now my Qnap TS-453 mini works perfectly thanks to you.
A friend of mine has a TVS-463 with the same problem. (System botting >>>).
Do you think it's possible to fix it?
I have seen that he has an AMD G-series GX-424CC CPU.
can it work?
Now my Qnap TS-453 mini works perfectly thanks to you.
A friend of mine has a TVS-463 with the same problem. (System botting >>>).
Do you think it's possible to fix it?
I have seen that he has an AMD G-series GX-424CC CPU.
can it work?
- dolbyman
- Guru
- Posts: 35035
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
different CPU brand, doubtful that it is the same issue
that booting message is the default of the LCD .. it just means that no signal is ever written to the LCD due to unsuccessful or incomplete boot
that booting message is the default of the LCD .. it just means that no signal is ever written to the LCD due to unsuccessful or incomplete boot
-
- Starting out
- Posts: 26
- Joined: Tue Mar 12, 2019 3:54 pm
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
What do you think it could be?
I have already replaced ram, power supply and dom but the result does not change.
I have already replaced ram, power supply and dom but the result does not change.
- dolbyman
- Guru
- Posts: 35035
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
what does the HDMI output ?
-
- Starting out
- Posts: 26
- Joined: Tue Mar 12, 2019 3:54 pm
- yujungchang
- Starting out
- Posts: 35
- Joined: Sun Sep 20, 2020 11:54 am
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
Great, nice to hear you stick to it and get it all working again!Pesca65 wrote: ↑Thu Feb 18, 2021 4:53 am hello yujungchang, i did it !!
Now my Qnap TS-453 mini works perfectly thanks to you.
A friend of mine has a TVS-463 with the same problem. (System botting >>>).
Do you think it's possible to fix it?
I have seen that he has an AMD G-series GX-424CC CPU.
can it work?
Unfortunately this is specific to certain Intel CPU models/steppings, so it's not applicable to the newer/older Intel cpu/steppings or any of the AMD.
I'm sure AMD has its own share of issues, but I'm not familiar with their designs and won't be able to help.
XDD missile launch @Taiwan https://www.thingiverse.com/thing:5448224
[How to] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?) viewtopic.php?f=45&t=157459
[How to] Debug the SATA backplane power issue (models w/ a brick power supply viewtopic.php?f=50&t=157649
[How to] Enable onboard SATA connectors on the x53/x51 (Total 4+2 SATA drives for a 4 bay model) viewtopic.php?f=97&t=157816
[How to] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?) viewtopic.php?f=45&t=157459
[How to] Debug the SATA backplane power issue (models w/ a brick power supply viewtopic.php?f=50&t=157649
[How to] Enable onboard SATA connectors on the x53/x51 (Total 4+2 SATA drives for a 4 bay model) viewtopic.php?f=97&t=157816
-
- First post
- Posts: 1
- Joined: Tue Feb 16, 2021 7:03 pm
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
Thanks yujungchang. I applied the fix at pin 1 and 8 on my TS-251. Here's some pics that may help some others with the same issue on TS-251.
I did contact QNAP support and they wanted $140 to try and fix it.
I did contact QNAP support and they wanted $140 to try and fix it.
You do not have the required permissions to view the files attached to this post.
-
- First post
- Posts: 1
- Joined: Sun Feb 28, 2021 11:55 am
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
sicario wrote: ↑Thu Feb 25, 2021 8:03 pm Thanks yujungchang. I applied the fix at pin 1 and 8 on my TS-251. Here's some pics that may help some others with the same issue on TS-251.
I did contact QNAP support and they wanted $140 to try and fix it.
20210225_000713.jpg
20210225_000734.jpg
20210225_001101.jpg
Thanks! I have the same problem in the ts 251
-
- New here
- Posts: 2
- Joined: Tue Dec 29, 2020 8:29 pm
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
Thanks yujungchang and thanks to sicario for posted photos.
Obv I have the same problem on TS-251+...
Obv I have the same problem on TS-251+...
-
- New here
- Posts: 2
- Joined: Tue Dec 29, 2020 8:29 pm
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
System perfectly recovered.
Here the pic of my TS-251+ motherboard with resistor 100 Ohm applied.
Thanks again.
Here the pic of my TS-251+ motherboard with resistor 100 Ohm applied.
Thanks again.
You do not have the required permissions to view the files attached to this post.
-
- New here
- Posts: 2
- Joined: Sat Mar 13, 2021 3:31 am
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
Bought dead TS-251 today, found this forum, read these posts, installed 118 Ohm resistor and IT WORKS!
Thanks guys!
Thanks guys!
-
- Experience counts
- Posts: 2415
- Joined: Wed Jan 08, 2014 10:34 pm
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
Presumably you know this isn't a permanent fix - it just extends the working life somewhat.
Useful for providing a chance to retrieve data that has not been backed up.
The underlying cause is a design weakness in the CPU that causes a progressive deterioration of an I/O signal.
Useful for providing a chance to retrieve data that has not been backed up.
The underlying cause is a design weakness in the CPU that causes a progressive deterioration of an I/O signal.
TS-431+ for storage and media and a bunch of IP cams under Surveillance Station. TVS-473 as files backup and QVR Pro.
-
- New here
- Posts: 2
- Joined: Sat Mar 13, 2021 3:31 am
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
So I can't sell it - it will be dead again? Interesting, how long it takes to die again?
-
- Experience counts
- Posts: 2415
- Joined: Wed Jan 08, 2014 10:34 pm
Re: [How To] Recover no beep / dead Intel based Qnap x53/x51 (2014~2016?)
That's not something that can be easily predicted.Interesting, how long it takes to die again?
It would depend on how much deterioration has already occurred, for example.
The effect doesn't occur when the device is powered off, so that can be used to extend the remaining life.
Check out some google searches on "intel cpu electromigration" for example.
Or the Wikipedia article on the topic - https://en.wikipedia.org/wiki/Electromigration
Buried in this large thread also are links to Intel's advisories on the elevated susceptibility of the specific CPU used in these NAS models.
TS-431+ for storage and media and a bunch of IP cams under Surveillance Station. TVS-473 as files backup and QVR Pro.