QHora-301W, unfinished product?
-
- New here
- Posts: 3
- Joined: Thu Apr 22, 2021 9:10 pm
QHora-301W, unfinished product?
I've got a QHora-301W as soon as it was available in my country and I'm very happy with the 10GBe performance and the Wifi 6 is fantastic.
However I'm fighting with a few issues:
- The Firmware seems to be a bit unstable, I get about 1 random reboot per day, the router is not reporting high temperatures nor any errors in the log
- There is no IPv6 support
- There is no DynDNS support (Luckily my NAS can do that for now)
In earlier firmware versions I've observed also performance degradation after a while where the WAN speed slowed down to ~500MBps (I have a 1Gbps/100Mbps connection). Is there a firmware roadmap and a way to see more detailed logs after a reboot?
However I'm fighting with a few issues:
- The Firmware seems to be a bit unstable, I get about 1 random reboot per day, the router is not reporting high temperatures nor any errors in the log
- There is no IPv6 support
- There is no DynDNS support (Luckily my NAS can do that for now)
In earlier firmware versions I've observed also performance degradation after a while where the WAN speed slowed down to ~500MBps (I have a 1Gbps/100Mbps connection). Is there a firmware roadmap and a way to see more detailed logs after a reboot?
- dolbyman
- Guru
- Posts: 35253
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: QHora-301W, unfinished product?
Hope Dyndns is only used for a VPN server and not for direct exposure of NAS services
viewtopic.php?f=45&t=160849
Oh and btw..this is a user forum, QNAP does not come here..and we do not have any access to internal roadmaps or juicy gossip
viewtopic.php?f=45&t=160849
Oh and btw..this is a user forum, QNAP does not come here..and we do not have any access to internal roadmaps or juicy gossip
- Moogle Stiltzkin
- Guru
- Posts: 11448
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: QHora-301W, unfinished product?
@nexus
that's surprising
assuming you are using default app without doing anything weird to it, user should expect it not to randomly reboot. you definitely should create a support ticket for that
https://service.qnap.com/
yes i would have first check the temp for the router, but you are saying temp readings were okay.
ipv6 is usually standard support especially for router these days. you best also create a ticket for this asking for a feature request.
personally i didn't enable ipv6. becauze it's more of a detriment for vpns more often than not.
that's surprising
assuming you are using default app without doing anything weird to it, user should expect it not to randomly reboot. you definitely should create a support ticket for that
https://service.qnap.com/
yes i would have first check the temp for the router, but you are saying temp readings were okay.
ipv6 is usually standard support especially for router these days. you best also create a ticket for this asking for a feature request.
personally i didn't enable ipv6. becauze it's more of a detriment for vpns more often than not.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- New here
- Posts: 3
- Joined: Thu Apr 22, 2021 9:10 pm
Re: QHora-301W, unfinished product?
Hehe, no worries disabling the whole qnap cloud and automatic port opening from the NAS is the first thing I do on these products.dolbyman wrote: ↑Thu Apr 22, 2021 9:36 pm Hope Dyndns is only used for a VPN server and not for direct exposure of NAS services
viewtopic.php?f=45&t=160849
Oh and btw..this is a user forum, QNAP does not come here..and we do not have any access to internal roadmaps or juicy gossip
Hmmm I hoped somebody already looked into the router a bit more indepth and would know log files or other stuff to check after reboots. I have to say that I use both available 10Gbe Ports but again the temperature always claimed to be normal.Moogle Stiltzkin wrote: ↑Fri Apr 23, 2021 3:31 am @nexus
that's surprising
assuming you are using default app without doing anything weird to it, user should expect it not to randomly reboot. you definitely should create a support ticket for that
https://service.qnap.com/
yes i would have first check the temp for the router, but you are saying temp readings were okay.
ipv6 is usually standard support especially for router these days. you best also create a ticket for this asking for a feature request.
personally i didn't enable ipv6. becauze it's more of a detriment for vpns more often than not.
-
- New here
- Posts: 3
- Joined: Wed Apr 28, 2021 10:29 am
Re: QHora-301W, unfinished product?
DynDNS support was added recently, right? But OpenVPN support was "downgraded" to QVPN? Can I connect to a regular OpenVPN Server with it and route the vpn data to a specific vLAN as well?
- Moogle Stiltzkin
- Guru
- Posts: 11448
- Joined: Thu Dec 04, 2008 12:21 am
- Location: Around the world....
- Contact:
Re: QHora-301W, unfinished product?
there is no openvpn encryption protocol in the options?
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1
Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)
Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
-
- New here
- Posts: 3
- Joined: Wed Apr 28, 2021 10:29 am
Re: QHora-301W, unfinished product?
There an OpenVPN optionas a QVPN client that reads a *.ovpn file but it does not work with a normal OpenVPN Server. Debugging the logfile is also not existent. VLAN tagging does not work either. so if you switch a port from (all) access port to trunk port (with a vlan tag) the connected client still get's the old dhcp lease from before. When forceing a new lease on the client the VLAN tagged ports don't work even when DHCP was enabled. This is quite a bummer.
-
- New here
- Posts: 3
- Joined: Wed Apr 28, 2021 10:29 am
Re: QHora-301W, unfinished product?
3 days fighting with this router and I think that I will send it back. I have been resetting and rebooting this router far too many times now and some settings are just random with every reboot. Now the reboot takes several minutes (I think it's overheating)
On top of this:
The firewall options are really really bad.
OpenVPN is basically non existent.
vLAN is severely lacking.
and the support is not really helpful either.
On top of this:
The firewall options are really really bad.
OpenVPN is basically non existent.
vLAN is severely lacking.
and the support is not really helpful either.
-
- Starting out
- Posts: 13
- Joined: Sat Dec 21, 2019 8:29 am
Re: QHora-301W, unfinished product?
After 3 months I am also getting 1-2 random reboots a day.
-
- Getting the hang of things
- Posts: 84
- Joined: Wed Aug 06, 2008 4:56 am
Re: QHora-301W, unfinished product?
I think the product maybe finished, quite literally dead in the water!
TS-509
-
- Starting out
- Posts: 13
- Joined: Sat Dec 21, 2019 8:29 am
-
- New here
- Posts: 3
- Joined: Thu Apr 22, 2021 9:10 pm
Re: QHora-301W, unfinished product?
I've got mine replaced which made things better, however I can now reproducibly get it to reboot when running bruteforce attacks for security research purposes (Burp Suite Intruder...).
-
- Easy as a breeze
- Posts: 488
- Joined: Fri Mar 31, 2017 7:09 am
Re: QHora-301W, unfinished product?
Are you saying you can make it reboot when it should not when you simulate a brute force attack?
If you can say how to reproduce this, I can report this.