QTS 4.4.0.0883 build 20190323

[sharonhsieh]

QTS 4.4.0.0883 build 20190323

Download links:
https://download.qnap.com

/Storage/TS-X53D/TS-X53D_20190323-4.4.0.0883.zip
/Storage/TS-X72/TS-X72_20190323-4.4.0.0883.zip
/Storage/TS-X72U/TS-X72U_20190323-4.4.0.0883.zip
/Storage/TS-X88/TS-X88_20190323-4.4.0.0883.zip

Release note:

QTS 4.4.0.0883 build 20190323

[Important Notes]
- Modified the file download and update settings for the China region.
- To learn more about NAS models that support the TR-004/TR-002, see the Compatibility List at https://www.qnap.com/en/compatibility-expansion
- To use a TR-004/TR-002 external RAID enclosure to expand NAS storage space, the enclosure must have exactly one external RAID group. Individual disks cannot be used to expand NAS space.
- All NAS models supported by QTS 4.4.0 use Kernel 4.14.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php

[New feature]
Storage ＆ Snapshot
- Added support for the QNAP TR-002 External RAID Enclosure.

Network and Virtual Switch
- Added support for QNA-T310G1T / QNA-T310G1S.

[Known Issues]
- When a TR-002 external RAID enclosure is connected to a USB 3.1 Gen2 port on the NAS, the bus type incorrectly appears as USB 3.0 in the QTS UI. This is a UI problem only, data will actually be transferred at USB 3.1 Gen2 speeds.
- When data is being transferred to or from a QNAP external RAID enclosure, changes to the status of a degraded RAID group might not be visible immediately in Storage ＆ Snapshots.
- When an external RAID group is in degraded mode its read/write performance will be greatly reduced.
- A failed external RAID group may have the status "Unknown" instead of "Failed".n an TR-004 external RAID enclosure is connected to the NAS, changing the enclosure's RAID configuration using the hardware Mode switch might cause the status of its external RAID group or disks to change to "Error". To resolve this issue, update the enclosure firmware to the latest version.

[Fixed Issues]
- Fixed a remote code execution vulnerability in Netatalk (CVE-2018-1160).
- Fixed an improper access control vulnerability in Helpdesk (CVE-2018-0728).
- Fixed a command injection vulnerability in Music Station (CVE-2018-0729).
- Fixed a cross-site scripting vulnerability in Notification Center (CVE-2019-7179).
- File Station could not correctly display the colors of IIQ raw images.
- Snapshot Replica could not function normally when the source and destination NAS device names began with a number.
- Snapshot Replica jobs would stop running when users unlocked an encrypted shared folder.
- Photo Station could not create thumbnails for certain photos.
- Users could not grant NFS host access permissions to more than one IP address after updating QTS to 4.3.6 build 20190228.
- Snapshot Replica jobs could not back up snapshots after users changed the passwords on the source and destination NAS.
- Non-administrator users could not access snapshot folders via Samba when Advanced Folder Permissions and Windows ACL Support were enabled.