Incorrect sorting volumes in file station

peppebytes · Post by **peppebytes** » Fri Dec 02, 2016 6:45 pm

Hi,

i have an issue with my QNAP TS-420 latest firmware (4.2.2 - 2016/11/02).

i have an incorrect sorting of the volumes showed in file station, see the attached pics, someone know how to fix this?

reboot or update of the firmware do not fixed this, i have this issue since QTS 4.2.1.

thanks a lot.

Spider99 · Post by **Spider99** » Fri Dec 02, 2016 10:22 pm

rename them and see if you get correct order

peppebytes · Post by **peppebytes** » Fri Dec 02, 2016 10:47 pm

how can i rename the volume? i do not have any contestual menu with right clik.

storageman · Post by **storageman** » Sat Dec 03, 2016 12:36 am

Actions (alias)

Spider99 · Post by **Spider99** » Sat Dec 03, 2016 4:11 am

in storage manager to be clearer

peppebytes · Post by **peppebytes** » Sat Dec 03, 2016 4:49 pm

Sorry but I'm looking for this but i do not found nothing.
only scan, create, check file system, format but nothing about alias.
see attached pic to see if i look in correct section.

AlastairStevenson · Post by **AlastairStevenson** » Sat Dec 03, 2016 5:38 pm

As an aside - you really should not ignore the orange Warning message about your drive #3
Check out the SMART detail (not the top-level summary) to see what has triggered the warning.
You may be in the process of losing one of your HDDs.

Spider99 · Post by **Spider99** » Sat Dec 03, 2016 8:01 pm

ah the reason i think why you have them out of order is they are single disk volumes - i suspect its the order the nas created them or volume 4 is on disk1 etc

and yes sort your redundancy out if disk 3 dies you loose all the data on that disk

dont have a live cat 1 nas at the moment but the alais options are going to be in raid management

peppebytes · Post by **peppebytes** » Sat Dec 03, 2016 10:25 pm

Yes i do not have raid but only single disk configuration, don't worry about the warning, i kwon, on disk 3 no important data are present i will replace this asap, but the issue is still present how can i fix the correct order?

peppebytes · Post by **peppebytes** » Tue Dec 06, 2016 8:32 pm

no update?

Spider99 · Post by **Spider99** » Tue Dec 06, 2016 10:47 pm

you have had an answer twice??

peppebytes · Post by **peppebytes** » Tue Dec 06, 2016 11:48 pm

Spider99 wrote:ah the reason i think why you have them out of order is they are single disk volumes - i suspect its the order the nas created them or volume 4 is on disk1 etc

these volumes was created since when i installed my QNAP 3 years ago for the first time and in the past the sorting was correct, i don't remeber after what update occur this.

every volume is related at the correct DISK

DISK 1 -> Volume 1
DISK 2 -> Volume 2
DISK 3 -> Volume 3
DISK 4 -> Volume 4

this shuffle shorting is only present on Qfile.

QNAP NAS Community Forum

Incorrect sorting volumes in file station

Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station

Re: Incorrect sorting volumes in file station