TVS-951x 10Gbe Connection - No activity

Don't miss a thing. Post your questions and discussion about other uncategorized NAS features here.
Post Reply
ILMsux
New here
Posts: 3
Joined: Thu Dec 06, 2018 11:10 am

TVS-951x 10Gbe Connection - No activity

Post by ILMsux » Thu Dec 06, 2018 3:23 pm

Hello all!

The setup

TVS-951x connected to a QSW-804-4C switch via 10Gbe RJ45

Win10 PC also connected to the QSW-804-4C switch from 10Gbe NIC

Green light connection activity from the Win10 PC to the switch

Zero activity from the TVS-951x both on the switch and the rear activity/connection lights

If I connect the TVS-951x to the QSW-804-4C switch via its 1Gbe connection it lights up (amber of course) and the Win10 PC can see and access the NAS.

Any idea what gives? I'm very computer literate but networking is a weak spot. Curious if I'm making a fatal error ... but expected at least connection lights from the NAS 10Gbe port.

Thanks!

User avatar
storageman
Experience counts
Posts: 4030
Joined: Thu Sep 22, 2011 10:57 pm

Re: TVS-951x 10Gbe Connection - No activity

Post by storageman » Thu Dec 06, 2018 5:32 pm

This is unmanaged switch, no config necessary.
IP addresses of 1 and 10GbE ports on NAS/PC/network would be useful. Are they static or DHCP?
If you connect NAS 10GbE port direct to PC (169.254.100.100) do they talk to eachother?

ILMsux
New here
Posts: 3
Joined: Thu Dec 06, 2018 11:10 am

Re: TVS-951x 10Gbe Connection - No activity

Post by ILMsux » Thu Dec 06, 2018 11:59 pm

DHCP

I did attempt to direct connect 10Gbe on NAS to 10Gbe NIC for an ad-hoc connection but again ... no connection lights or ability to configure that adapter on the NAS. Only options for adapter 2 (1Gbe) were available.

Thisisnotmyname
Know my way around
Posts: 112
Joined: Mon Nov 19, 2018 1:21 am

Re: TVS-951x 10Gbe Connection - No activity

Post by Thisisnotmyname » Fri Dec 07, 2018 1:23 am

simple question, same cable in both tests? Don't have a faulty cable on the NAS 10GbE port?

ILMsux
New here
Posts: 3
Joined: Thu Dec 06, 2018 11:10 am

Re: TVS-951x 10Gbe Connection - No activity

Post by ILMsux » Fri Dec 07, 2018 2:26 am

Hrm ... You know, I did try multiple cables but I did NOT try the one cable confirmed to connect 10Gbe (PC to switch).

Not a ton of high hopes but definitely another thing to check off the list.

User avatar
Trexx
Experience counts
Posts: 4445
Joined: Sat Oct 01, 2011 7:50 am
Location: Minnesota
Contact:

Re: TVS-951x 10Gbe Connection - No activity

Post by Trexx » Fri Dec 07, 2018 4:22 am

Need pictures from vswitch manager, ip information, etc.

First thing I would try is simple QNAP - PC direct connection with static IP's assigned. Then make sure can ping each other. IF that works, then NICs are good and cable is good.
Paul

Model: TS-877-1600 FW: 4.3.5.x
QTier (HDD): [RAID-5] 6 x 3TB HGST DeskStar NAS QTier (SSD): [RAID-1] 2 x 525GB Crucial MX300 m.2's
(SSD): [RAID-1] 2 x 500GB Evo 860
RAM: Kingston HyperX Fury 32GB Kit DDR4-2666
GPU: EVGA GTX 1060, ACX 2.0(1 Fan), 6GB
UPS: CyberPower AVR1350 Ext. Backup: USB 3.0 Seagate 5TB
Media Boxes: Nvidia ShieldTV Pro, AppleTV 4, Roku Stick

Model: TVS-673 32GB FW: 4.3.5.x Test/Backup Box
-----------------------------------------------------------------------------------------------------------------------------------------
NAS RAID Rebuild Times | Live QTS Videos | | QNAP NAS Guide | Information needed when you ask for HELP | QNAP Links, Tutorials, etc.
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq

Post Reply

Return to “Miscellaneous”