Hi. I have recently acquired a faulty TS-932x which wouldn't turn on at all. I have managed to repair all the faulty parts and the unit now powers on but doesn't boot, and my problem is one of the chips i replaced is the MCU for the NAS which controls all the low level power management and bringing the CPU out of reset. It is a Weltrend WT61P803 chip and has a custom firmware programmed into it to control the power rails in the unit. Unfortunately i cannot find this software online and QNAP are unable to help me, so as a last ditched attempt I'm asking on here on the off chance there is the slightest glimmer of hope of somebody having this .hex file handy.
Many thanks in advance, Sean.
Firmware for TS-932x MCU (weltrend)
-
- New here
- Posts: 3
- Joined: Sat Aug 10, 2019 4:41 am
Re: Firmware for TS-932x MCU (weltrend)
Nobody?? Ahhh ok, my next question then is, does anybody have a broken TS-932X (in the UK) that i could possibly buy, or attempt to repair free of charge (in exchange for letting me download the required firmware)?
- Toxic17
- Ask me anything
- Posts: 6469
- Joined: Tue Jan 25, 2011 11:41 pm
- Location: Planet Earth
- Contact:
Re: Firmware for TS-932x MCU (weltrend)
I'm curious as to how a less than 2 year old NAS is not covered by QNAP warranty?
Regards Simon
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following
NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
-
- New here
- Posts: 3
- Joined: Sat Aug 10, 2019 4:41 am
Re: Firmware for TS-932x MCU (weltrend)
Me too! i bought it second hand off eBay knowing it was faulty. And when attempting to talk to QNAP, they asked me for the serial number, and when I checked, the sticker with the serial number was missing from the unit, therefore, no RMA was possible. Hence i'm in this situation.