NUT Configuration
-
- Starting out
- Posts: 31
- Joined: Wed Feb 10, 2021 9:38 pm
NUT Configuration
I am trying to use the NUT tool with my qnap to have it shutdown when the UPS battery power gets low. I've already added the UPS to upsmon.conf. How do I get upsmon to run/start at start-up?
- dolbyman
- Guru
- Posts: 35274
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: NUT Configuration
Have you tried the network slave gui ? Unless the QNAP is the network master (also in the gui) .. but that is not quite clear from the question
-
- Starting out
- Posts: 31
- Joined: Wed Feb 10, 2021 9:38 pm
Re: NUT Configuration
Yes, the qnap device is set to be a network ups slave.
How can I ensure the connection is working?
How can I ensure the connection is working?
- dolbyman
- Guru
- Posts: 35274
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: NUT Configuration
pull the plug on your ups and check the ups status
-
- Starting out
- Posts: 31
- Joined: Wed Feb 10, 2021 9:38 pm
Re: NUT Configuration
I've set the IP address of the NUT UPS server. But the UPS information is not coming up.
- dolbyman
- Guru
- Posts: 35274
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: NUT Configuration
you should be able to query ups status via ssh.....check
- moody_blue
- Easy as a breeze
- Posts: 266
- Joined: Tue Jan 10, 2017 9:23 am
Re: NUT Configuration
The ups name in the NUT server must be qnapups
QNAP TS-253A 8G QTS 5.0.1.2145
Plex Media Server 1.29.0.6209
OpenHAB 3.4.0.M2
Unifi 7.2.92
Apache80 2454.8230
GLPI 10.0.3
Plex Media Server 1.29.0.6209
OpenHAB 3.4.0.M2
Unifi 7.2.92
Apache80 2454.8230
GLPI 10.0.3