NUT Configuration

Don't miss a thing. Post your questions and discussion about other uncategorized NAS features here.
Post Reply
userman93
Starting out
Posts: 31
Joined: Wed Feb 10, 2021 9:38 pm

NUT Configuration

Post by userman93 »

I am trying to use the NUT tool with my qnap to have it shutdown when the UPS battery power gets low. I've already added the UPS to upsmon.conf. How do I get upsmon to run/start at start-up?
User avatar
dolbyman
Guru
Posts: 35021
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: NUT Configuration

Post by dolbyman »

Have you tried the network slave gui ? Unless the QNAP is the network master (also in the gui) .. but that is not quite clear from the question
userman93
Starting out
Posts: 31
Joined: Wed Feb 10, 2021 9:38 pm

Re: NUT Configuration

Post by userman93 »

Yes, the qnap device is set to be a network ups slave.
How can I ensure the connection is working?
User avatar
dolbyman
Guru
Posts: 35021
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: NUT Configuration

Post by dolbyman »

pull the plug on your ups and check the ups status
userman93
Starting out
Posts: 31
Joined: Wed Feb 10, 2021 9:38 pm

Re: NUT Configuration

Post by userman93 »

I've set the IP address of the NUT UPS server. But the UPS information is not coming up.
User avatar
dolbyman
Guru
Posts: 35021
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: NUT Configuration

Post by dolbyman »

you should be able to query ups status via ssh.....check
User avatar
moody_blue
Easy as a breeze
Posts: 266
Joined: Tue Jan 10, 2017 9:23 am

Re: NUT Configuration

Post by moody_blue »

The ups name in the NUT server must be qnapups
QNAP TS-253A 8G QTS 5.0.1.2145
Plex Media Server 1.29.0.6209
OpenHAB 3.4.0.M2
Unifi 7.2.92
Apache80 2454.8230
GLPI 10.0.3
Post Reply

Return to “Miscellaneous”