Hi there.
I conducted a search of the forums and was unable to find an answer to my problem. Also, apologies for the cross-post. I did not realize there was a sub-forum dedicated to spin down issues.
I am a new user of a TS-231 and am looking for some help. I have initialized by TS-231 in a RAID 1 config and have been able to save files to the unit. However the TS-231 is not entering standby mode. I am in need of help figuring out why. My details are below.
TS-231
2 x 3TB drives
Default install
No additional apps installed on the system
Media server, iTunes server, etc disabled
When not in use the systems looks as follows:
- two solid green HD lights
- flashing orange LAN light
I found this URL (https://wiki.qnap.com/wiki/Hard_drives_spindown_issues) and have run the .sh file. I can post the results here if it will be helpful. I ran the .sh file but was not sure what I was looking for.
Thank you.
TS-231 not entering Standby mode
- dolbyman
- Guru
- Posts: 35273
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-231 not entering Standby mode
Sure run it and post the results in a zip file and attach to the post
Also not quite sure why you had to open a new thread ... you already made one for this
viewtopic.php?f=25&t=126605&p=572691#p572691
Also not quite sure why you had to open a new thread ... you already made one for this
viewtopic.php?f=25&t=126605&p=572691#p572691
-
- New here
- Posts: 6
- Joined: Wed Oct 12, 2016 7:58 am
Re: TS-231 not entering Standby mode
Thanks dolbyman.
I made the double post as I did not realize there was a subforum dedicated to standby issues. A noob mistake.
I'll zip and post to results. Thank you.
I made the double post as I did not realize there was a subforum dedicated to standby issues. A noob mistake.
I'll zip and post to results. Thank you.
-
- First post
- Posts: 1
- Joined: Thu Oct 13, 2016 1:31 pm
Re: TS-231 not entering Standby mode
Same problem w./ the TS-231.
-
- New here
- Posts: 6
- Joined: Wed Oct 12, 2016 7:58 am
Re: TS-231 not entering Standby mode
Ok, as follow up when I run the script I am seeing several entries stating "Dirtied inode".
Could that be an issue on why the drives won't go in to standby mode? What is a dirtied inode anyway?
Thank you.
Could that be an issue on why the drives won't go in to standby mode? What is a dirtied inode anyway?
Thank you.
- dolbyman
- Guru
- Posts: 35273
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-231 not entering Standby mode
you need to post the results (zip em up)