QNAP TS 473 - does not spin down

Discussion about hard drive spin down (standby) feature of NAS.
Post Reply
zac_df1
Starting out
Posts: 19
Joined: Mon Jul 24, 2017 8:43 pm

QNAP TS 473 - does not spin down

Post by zac_df1 »

Dear QNAP Fans,

my 473 does not spin down, spin down time was set to 30min default. I set it meanwhile to 5mins and ran the https://wiki.qnap.com/wiki/Find_out_whi ... m_spindown
Attached the results from Putty (had to rar it as txt is not allowed). Putty kept only the results from test 72-100. Hope this is still fine.

I am quite new to this tuning and wondering if anybody could please have a look at if there is anything abvious or provide some directions to me.
Found quite plenty of topics in that area and am starting to get a little lost ;-)

Thank you in advance.
Kind regards
:-)
You do not have the required permissions to view the files attached to this post.
Qnap TS-473-8G https://www.qnap.com/de-de/product/ts-4 ... /hardware
8G = 8GB RAM, Firmware 4.4.2.1320 (latest as of 13-Jun-2020)

Raids (currently no SSDs)
1) Raid1 2x10TB Seagate ST10000NM0086-2AA101
2) Raid1 2x4TB Seagate ST4000DM005-2DP166
Post Reply

Return to “HDD Spin Down (HDD Standby)”