Qnap 469 Pro & HD Station Problems - Green Picture

Don't miss a thing. Post your questions and discussion about other uncategorized NAS features here.
Post Reply
INU-Anders
First post
Posts: 1
Joined: Wed Feb 20, 2013 6:29 pm

Qnap 469 Pro & HD Station Problems - Green Picture

Post by INU-Anders »

New member here on the forum and also new NAS user, have no experience at all... so i need some help;-)

I have just bought a Qnap 469pro with 3 MB RAM and enabled HD station but the picture on the TV will turn green or purple!
If I watch the TV while I start the NAS the color appears good but when it started up (finished), the picture is green, not solid green, I see all the menus and I can watch the movie but it´s just a green mess! If I restart the receiver (to which the Qnap is connected via HDMI) everything will be purple instead (everything that should be black turns green or purple)... see the attached pictures.
I've tried with different HDMI cables and I have tried different HDMI inputs on the receiver, but it does not help. All the other stuff (Boxee Box, Bluray) connected to the receiver via HDMI works great.

Anyone know what this could be or what I can try to solve the problem?

I also bought an MCE remote but it dident work at all... I bought it at inet.se, does anyone have one of these http://www.inet.se/files/pdf/6101315_0.pdf and got it to work?
If not, maybe someone can recommend a good remote that works (not IR and it must work on a distance of 8 meters)?
I also have a Logitech Harmony Touch that I think will work but I think need a IR eye or some sort of receiver, does anyone know?

Grateful for all the help I can get!
You do not have the required permissions to view the files attached to this post.
ztefmat
New here
Posts: 8
Joined: Sun Feb 24, 2013 12:47 pm

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by ztefmat »

Hi INU-Anders,

I have the same problem with my 669-PRO (with 1GB RAM extention).

I run the unit into a Denon 3311 and then to an old toshiba projector. When I plug the HDMI cable straight between the projector and the 669 I get the same issue, so it must either be the projector or the 669.

All other sources are ok on the projector, so I figued it must be the 669.

What works for me is to restart the HD station by pressing the copy key on the front for 5 seconds. Sometimes it would come back ok, somethimes it needs two restarts to work.

So you're not alone.
ztefmat
New here
Posts: 8
Joined: Sun Feb 24, 2013 12:47 pm

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by ztefmat »

...and today restarting HD station didn't work any more. Tried several times, no result.

Restaerting the server and then changing the resolution worked.
LarsN
Experience counts
Posts: 1543
Joined: Tue Dec 18, 2012 9:29 am
Contact:

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by LarsN »

I've passed this on to the PM so they can have a look at it.
ztefmat
New here
Posts: 8
Joined: Sun Feb 24, 2013 12:47 pm

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by ztefmat »

Thank you QNAPLars.

I have to say it works ok most times.

When it didn't work I've tried some more things: When switching the input of my projector between differend sources the color came back last time.

I still don't have a reliable way to fix the issue but it seems a "re-initialisation" of the connection between the 669-pro and whatever it connects to.
User avatar
KL643
Experience counts
Posts: 1996
Joined: Sun Sep 23, 2007 9:21 pm
Location: @40000ft
Contact:

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by KL643 »

It sometimes happens to me also. Switch off/on the tv fixes this.
INU-Anders wrote: I also have a Logitech Harmony Touch that I think will work but I think need a IR eye or some sort of receiver, does anyone know?
I bought a cheap MC remote on ebay (+/- 10 US) with a usb IR extension. Works perfectly with my Harmony One remote :)
User avatar
Perlbo76
Know my way around
Posts: 132
Joined: Thu Feb 16, 2012 2:05 am

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by Perlbo76 »

KL643 wrote:It sometimes happens to me also. Switch off/on the tv fixes this.
INU-Anders wrote: I also have a Logitech Harmony Touch that I think will work but I think need a IR eye or some sort of receiver, does anyone know?
I bought a cheap MC remote on ebay (+/- 10 US) with a usb IR extension. Works perfectly with my Harmony One remote :)
Can you provide the exact Name of usb ir. I have a harmony to :-)
Qnap TVS-873 16GB Ram
User avatar
KL643
Experience counts
Posts: 1996
Joined: Sun Sep 23, 2007 9:21 pm
Location: @40000ft
Contact:

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by KL643 »

I've sent you PM
ztefmat
New here
Posts: 8
Joined: Sun Feb 24, 2013 12:47 pm

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by ztefmat »

New test results: I couldn't get it to work anymore at all. In the end I deleted all HD Station modules and re-installed them.

Switched it back on: All good. Happy.

Some hours later i switched my Denon 3311 to "pure direct" and it's back to pink. Aaaaaaaaaah!!!!!

Switched "pure direct" off, it's normal again. Left it at that and works to date. :)
123rolle
New here
Posts: 9
Joined: Wed Mar 24, 2010 5:26 am

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by 123rolle »

Was there ever any working solutions to this. I am having the same problem with panasonic pt-ax200e.
ztefmat
New here
Posts: 8
Joined: Sun Feb 24, 2013 12:47 pm

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by ztefmat »

Not for me. I upgraded to the last firmware (TS-669Pro also on my receiver Denon 3311) but I still get it from time to time. Switching the input on the projector or switching from "pure direct" to normal or vice versa on the receiver solves the problems 90% of the time.
maharajg
First post
Posts: 1
Joined: Fri Aug 09, 2013 10:43 pm

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by maharajg »

Perlbo76 wrote:
KL643 wrote:It sometimes happens to me also. Switch off/on the tv fixes this.
INU-Anders wrote: I also have a Logitech Harmony Touch that I think will work but I think need a IR eye or some sort of receiver, does anyone know?
I bought a cheap MC remote on ebay (+/- 10 US) with a usb IR extension. Works perfectly with my Harmony One remote :)
Can you provide the exact Name of usb ir. I have a harmony to :-)
Hi Perlbo76

Could you please share the USB IR, I have a logitech harmony too.

Thanks
Srini
shyyour
First post
Posts: 1
Joined: Sun Dec 07, 2014 1:24 am

Re: Qnap 469 Pro & HD Station Problems - Green Picture

Post by shyyour »

Hi Guys,

Sorry to dredge a yr old post up but i need some help.

I have a QNAP TS-26l NAS (3GB Ram, 4.1.1, 2 x 4TB (running raid 1)) and i just bought a logitech harmony 650 remote.

Please i would like to know if the "usb IR extension" you recommended would work with my NAS and the name.

Many thanks in advance
Post Reply

Return to “Miscellaneous”