How to disable FFMPEG process
-
- First post
- Posts: 1
- Joined: Fri Aug 16, 2013 11:54 pm
How to disable FFMPEG process
Hi all,
My QNAP is consuming 100% CPU on ffmpeg. I disabled already all possible applications on the QNAP but ffmpeg keeps on running even after a reboot.
When I kill the process another ffmpeg process will launch.
I checked all my applications, all is off (all the stations, all media servers,....)
How can I disable the proceess or know what launches the process?
If I can't find a solution I will change the rights of ffmpeg or rename it so that it can't be launched.
Thanks for the info.
My QNAP is consuming 100% CPU on ffmpeg. I disabled already all possible applications on the QNAP but ffmpeg keeps on running even after a reboot.
When I kill the process another ffmpeg process will launch.
I checked all my applications, all is off (all the stations, all media servers,....)
How can I disable the proceess or know what launches the process?
If I can't find a solution I will change the rights of ffmpeg or rename it so that it can't be launched.
Thanks for the info.
- pwilson
- Guru
- Posts: 22533
- Joined: Fri Mar 06, 2009 11:20 am
- Location: Victoria, BC, Canada (UTC-08:00)
Re: How to disable FFMPEG process
Contact QNAP Customer Service for assistance. Disabling the MediaScanner (by setting it to "manual scan") in your unidentified Firmware version will deal with some of it, but it will continue to be used by File Station.Tim Deluxe wrote:Hi all,
My QNAP is consuming 100% CPU on ffmpeg. I disabled already all possible applications on the QNAP but ffmpeg keeps on running even after a reboot.
When I kill the process another ffmpeg process will launch.
I checked all my applications, all is off (all the stations, all media servers,....)
How can I disable the proceess or know what launches the process?
If I can't find a solution I will change the rights of ffmpeg or rename it so that it can't be launched.
Thanks for the info.
Changing the file permissions on /usr/bin/ffmpeg will not work permanently, as the original one will be re-installed at every reboot, as the Firmware is loaded into a RAMDisk at every boot, and is then run from the RAMDisk.
Patrick M. Wilson
Victoria, BC Canada
QNAP TS-470 Pro w/ 4 * Western Digital WD30EFRX WD Reds (RAID5) - - Single 8.1TB Storage Pool FW: QTS 4.2.0 Build 20151023 - Kali Linux v1.06 (64bit)
Forums: View My Profile - Search My Posts - View My Photo - View My Location - Top Community Posters
QNAP: Turbo NAS User Manual - QNAP Wiki - QNAP Tutorials - QNAP FAQs
Please review: When you're asking a question, please include the following.
-
- New here
- Posts: 3
- Joined: Tue May 28, 2013 2:49 am
Re: How to disable FFMPEG process
Hi,
This is driving me nuts.
I have disabled Multimedia Station and Rescan Media Library which appeared to be re-enabled when I installed 4.0.2, but still find many instances of ffmpeg running if I use top.
I use rsync to make mirror backups of my shares, but something keeps 'touching' directories, so that many need to be updated even though I have made no use of them. Is file manager creating thumbnail files in folders just because I'm browsing the file system via the QNAP UI?
I there any way to just use the QNAP for plain old file storage (which is all I want) without it wanting to take control all the time?
Cheers, Steve.
This is driving me nuts.
I have disabled Multimedia Station and Rescan Media Library which appeared to be re-enabled when I installed 4.0.2, but still find many instances of ffmpeg running if I use top.
I use rsync to make mirror backups of my shares, but something keeps 'touching' directories, so that many need to be updated even though I have made no use of them. Is file manager creating thumbnail files in folders just because I'm browsing the file system via the QNAP UI?
I there any way to just use the QNAP for plain old file storage (which is all I want) without it wanting to take control all the time?
Cheers, Steve.
- schumaku
- Guru
- Posts: 43579
- Joined: Mon Jan 21, 2008 4:41 pm
- Location: Kloten (Zurich), Switzerland -- Skype: schumaku
- Contact:
Re: How to disable FFMPEG process
You might have to disable the Media Library with every firmware update - the default is actually set very unlucky.
- teracow
- Easy as a breeze
- Posts: 303
- Joined: Thu Jun 23, 2011 8:17 am
Re: How to disable FFMPEG process
.
Last edited by teracow on Sat Nov 29, 2014 1:03 pm, edited 1 time in total.
I (like many others) have left this forum due to the incompetence of QNAP staff.
I have now completed deletion of all my posts (how-to's, images, hand-written instructions, on-the-fly user manuals, etc..). These are now gone.
I am not interested in assisting QNAP any further when they won't assist me. Anyone unlucky enough to have dealt with Adong Lin (QNAP Systems Inc.) or the blundering incompetence of the 'live chat' specialist AJ Lee will know what I mean. Adong doesn't understand the first thing about basic computer interoperability and AJ disconnects you from live chat when he doesn't want to deal with your problem.
I will not support QNAP any further. Far from it - I will now be recommending a competitor's hardware instead. I'm done.
I have now completed deletion of all my posts (how-to's, images, hand-written instructions, on-the-fly user manuals, etc..). These are now gone.
I am not interested in assisting QNAP any further when they won't assist me. Anyone unlucky enough to have dealt with Adong Lin (QNAP Systems Inc.) or the blundering incompetence of the 'live chat' specialist AJ Lee will know what I mean. Adong doesn't understand the first thing about basic computer interoperability and AJ disconnects you from live chat when he doesn't want to deal with your problem.
I will not support QNAP any further. Far from it - I will now be recommending a competitor's hardware instead. I'm done.
-
- Starting out
- Posts: 11
- Joined: Mon Jul 30, 2012 7:36 pm
Re: How to disable FFMPEG process
Changing permission of ffmpeg might do the trick only for the next run of the parent-caller of ffmpeg.
If the parent is still running and you try to get rid of ffmpeg ( and ) you see still popping up new ffmpeg-processes in nearly endless manner. All of them have a shell-script as parent and this shell-script's origin is a php-process.
unveils that there is a:
which is still running although you have disabled videostation in Station Manager.
After killing the php-process the QNAP resettles to silence since more than 4 weeks.
Unbelievable "feature" that QNAP has introduced with the last firmware-upgrade.
If the parent is still running and you try to get rid of ffmpeg (
Code: Select all
chmod -x /usr/local/medialibrary/bin/ffmpeg
Code: Select all
killall -9 ffmpeg
Code: Select all
grep "^PPid:" /proc/<pid>/status"
Code: Select all
/mnt/ext/opt/apache/bin/php -q /share/MD0_DATA/WEb/videsostation/actions/video_convert_loop.php
After killing the php-process the QNAP resettles to silence since more than 4 weeks.
Unbelievable "feature" that QNAP has introduced with the last firmware-upgrade.
- schumaku
- Guru
- Posts: 43579
- Joined: Mon Jan 21, 2008 4:41 pm
- Location: Kloten (Zurich), Switzerland -- Skype: schumaku
- Contact:
Re: How to disable FFMPEG process
Wrong conclusion in this case: QNAP has not installed Video Station on your NAS. Neither with an older nor with any firmware upgrade.pacco wrote:Unbelievable "feature" that QNAP has introduced with the last firmware-upgrade.
If you don't want Video Station (with it's automatic conversion process required to make all your videos available in a YouTube-like way - without any access rights management) uninstall Video Station from the Application Centre.
Might happen stopping a service does only stop the access to the service - not it's mandatory background jobs.
No need of any shell aerobatics.
Regards,
-Kurt.
-
- Starting out
- Posts: 11
- Joined: Mon Jul 30, 2012 7:36 pm
Re: How to disable FFMPEG process
You mean it was me who has enabled/installed the VideoStation? Would be embarassing, wouldn't it? But perhaps true, I cannot remember. At least I only remember that after last upgrade to FIrmware 4.0.2 (14.09.2013) the problem with the never-ending actions on NAS started. I have now uninstalled VideoStation completely. And I read again the description of the VideoStation-application - unfortunately not any pre-warning that enabling might result in week-long actions on the NAS due to converting all available Video/Multimedia to the destined formats. In future I will have to look much more deeper into the details when installing new apps on the NAS. I do not want to end up the same way again.
- schumaku
- Guru
- Posts: 43579
- Joined: Mon Jan 21, 2008 4:41 pm
- Location: Kloten (Zurich), Switzerland -- Skype: schumaku
- Contact:
Re: How to disable FFMPEG process
You will see more processing - independent of Video Station - caused by the Media Library scan and thumbnail creation. That's the more commonly reported issue leading to higher load I'm afraid. If you intend using the Photo Station / Music Station / or the coming up Video Station 2 or Pro, log with it's DLNA server -the Media Library is required.
Afraid: No simple (official) way to disable it - QNAP has pushed this to QTS 4.1 following community pressure and customer complaints. Some ideas are around in the forum however.
Afraid: No simple (official) way to disable it - QNAP has pushed this to QTS 4.1 following community pressure and customer complaints. Some ideas are around in the forum however.
-
- Starting out
- Posts: 11
- Joined: Mon Jul 30, 2012 7:36 pm
Re: How to disable FFMPEG process
Sounds to be stucked between a rock and a hard place. I still have the Photo Station enabled although I regularly access the files by NFS/CIFS. I will check the NAS-actions after next reboot and eventually remove the Photo-Station, too. Thanks for your supportive information.
- teracow
- Easy as a breeze
- Posts: 303
- Joined: Thu Jun 23, 2011 8:17 am
Re: How to disable FFMPEG process
.
Last edited by teracow on Sat Nov 29, 2014 1:04 pm, edited 1 time in total.
I (like many others) have left this forum due to the incompetence of QNAP staff.
I have now completed deletion of all my posts (how-to's, images, hand-written instructions, on-the-fly user manuals, etc..). These are now gone.
I am not interested in assisting QNAP any further when they won't assist me. Anyone unlucky enough to have dealt with Adong Lin (QNAP Systems Inc.) or the blundering incompetence of the 'live chat' specialist AJ Lee will know what I mean. Adong doesn't understand the first thing about basic computer interoperability and AJ disconnects you from live chat when he doesn't want to deal with your problem.
I will not support QNAP any further. Far from it - I will now be recommending a competitor's hardware instead. I'm done.
I have now completed deletion of all my posts (how-to's, images, hand-written instructions, on-the-fly user manuals, etc..). These are now gone.
I am not interested in assisting QNAP any further when they won't assist me. Anyone unlucky enough to have dealt with Adong Lin (QNAP Systems Inc.) or the blundering incompetence of the 'live chat' specialist AJ Lee will know what I mean. Adong doesn't understand the first thing about basic computer interoperability and AJ disconnects you from live chat when he doesn't want to deal with your problem.
I will not support QNAP any further. Far from it - I will now be recommending a competitor's hardware instead. I'm done.
-
- Starting out
- Posts: 22
- Joined: Wed Apr 02, 2014 7:46 pm
Re: How to disable FFMPEG process
Hi to all,
i fixed ffmpeg at any boot in this way that remove execution right after 60 seconds after boot:
a. scripts building
1. create script dir
2. move to script dir
3. create script autorun.sh:
and insert this:
4. save and exit
6. create script ffmpeg-x.sh
and insert this:
7. save and exit
8. change permission to scripts:
b. enabling auto start in init.d
1. edit qpkg.conf file:
at the end of file add the follow section:
2. save and exit
reboot and enjoy!!
i fixed ffmpeg at any boot in this way that remove execution right after 60 seconds after boot:
a. scripts building
1. create script dir
Code: Select all
mkdir /share/HDA_DATA/.qpkg/autorun
2. move to script dir
Code: Select all
cd /share/HDA_DATA/.qpkg/autorun
3. create script autorun.sh:
Code: Select all
vi autorun.sh
Code: Select all
#!/bin/sh
/share/HDA_DATA/.qpkg/autorun/ffmpeg-x.sh &
Code: Select all
:wq!
Code: Select all
vi ffmpeg-x.sh
and insert this:
Code: Select all
#!/bin/sh
sleep 60
chmod -x /usr/local/medialibrary/bin/ffmpeg
Code: Select all
:wq!
Code: Select all
chmod 744 autorun.sh
chmod 744 ffmpeg-x.sh
b. enabling auto start in init.d
1. edit qpkg.conf file:
Code: Select all
vi /etc/config/qpkg.conf
at the end of file add the follow section:
Code: Select all
[autorun]
Name = autorun
Version = 0.1
Author = peppebytes
Date = 2014-03-31
Shell = /share/HDA_DATA/.qpkg/autorun/autorun.sh
Install_Path = /share/HDA_DATA/.qpkg/autorun
QPKG_File = autorun.qpkg
Enable = TRUE
Code: Select all
:wq!
reboot and enjoy!!
- schumaku
- Guru
- Posts: 43579
- Joined: Mon Jan 21, 2008 4:41 pm
- Location: Kloten (Zurich), Switzerland -- Skype: schumaku
- Contact:
Re: How to disable FFMPEG process
Up front, I'm aware the small NAS were becoming pretty much unresponsive on QTS 4.0.x before.
While the indications you made are good, we still need a crystal ball here ... or at least a shell access.
Does it impact the other services heavily?BunnyBomb wrote:After updating to the most recent firmware beta 4.1.0 a week ago, I cannot get rid of the ffmpeg process. It is taking 100% of my CPU for over an entire week now.
That much about the (non?)sense going on in this thread - as-is your NAS does not serve any purpose.BunnyBomb wrote:I don't have DLNA or Twonky media server enabled. Basically I've turned off everything that is useful about the QNAP, but the ffmpeg process will not go away.
And what is the problem when it comes to your NAS operations now?BunnyBomb wrote:It just sits there taking 100% of the CPU and if I restart it simply comes back.
While the indications you made are good, we still need a crystal ball here ... or at least a shell access.
- schumaku
- Guru
- Posts: 43579
- Joined: Mon Jan 21, 2008 4:41 pm
- Location: Kloten (Zurich), Switzerland -- Skype: schumaku
- Contact:
Re: How to disable FFMPEG process
Up front, I'm aware the small NAS were becoming pretty much unresponsive on QTS 4.0.x before.
While the indications you made are good, we still need a crystal ball here ... or at least a shell access.
Does it impact the other services heavily?BunnyBomb wrote:After updating to the most recent firmware beta 4.1.0 a week ago, I cannot get rid of the ffmpeg process. It is taking 100% of my CPU for over an entire week now.
That much about the (non?)sense going on in this thread - as-is your NAS does not serve any purpose.BunnyBomb wrote:I don't have DLNA or Twonky media server enabled. Basically I've turned off everything that is useful about the QNAP, but the ffmpeg process will not go away.
And what is the problem when it comes to your NAS operations now?BunnyBomb wrote:It just sits there taking 100% of the CPU and if I restart it simply comes back.
While the indications you made are good, we still need a crystal ball here ... or at least a shell access.
-
- Know my way around
- Posts: 137
- Joined: Sat Sep 15, 2007 5:18 am
Re: How to disable FFMPEG process
I am having the same issues, although I do have the Multimedia, Photostation, Filestation enabled. But hey, I have it enabled because of the wonderful promises by Qnap that everything on these NAS is so easy and quick.
I do not mind of having background tasks running, yet isn't there a way to make these software updates a bit less CPU hungry? Why can't this silly ffmepg program run with less CPU power? It only creates a few thumbnails and it does a bit of trans coding, right? Who writes such bad software in the first place? Okay, it is open source, yes and sometimes, what does not cost much is not worth much. Or is the people who integrate the software into a NAS software build to blame?
Why can't we get more control over such things? e.g. setting the tasks to run with less priority or restrict their CPU usage? It is about time that Qnap implements features that allows us non-experienced users to control what is going on without having to use putty and to write scripts. I bought Qnap because it is so easy to work with them, seems to be not so easy after all.
Running the 4.1 software on the 2 GHz TS-419P II does run that ffmpeg at 85 to 95% all the time while it is creating thumbnails. Hey, it is a thumbnail, not a 50 GB blu-ray file, can't this be done faster, at least a little bit? It is a turbo NAS after all .
I do not mind of having background tasks running, yet isn't there a way to make these software updates a bit less CPU hungry? Why can't this silly ffmepg program run with less CPU power? It only creates a few thumbnails and it does a bit of trans coding, right? Who writes such bad software in the first place? Okay, it is open source, yes and sometimes, what does not cost much is not worth much. Or is the people who integrate the software into a NAS software build to blame?
Why can't we get more control over such things? e.g. setting the tasks to run with less priority or restrict their CPU usage? It is about time that Qnap implements features that allows us non-experienced users to control what is going on without having to use putty and to write scripts. I bought Qnap because it is so easy to work with them, seems to be not so easy after all.
Running the 4.1 software on the 2 GHz TS-419P II does run that ffmpeg at 85 to 95% all the time while it is creating thumbnails. Hey, it is a thumbnail, not a 50 GB blu-ray file, can't this be done faster, at least a little bit? It is a turbo NAS after all .