[QSonarr] [2.0.0.5338] Smart PVR for newsgroup and bittorrent users
-
- Know my way around
- Posts: 116
- Joined: Tue Jul 07, 2015 11:09 pm
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
Tried enabling SSL on Sonarr but now the app is unreachable. I see now from earlier in this thread that it appears that SSL is not working.
If SSL CANNOT be enabled for Sonarr, how can I reset this feature without access to the GUI?
If SSL CAN be enabled for Sonarr, what might I have done wrong?
I am fairly new to this stuff, appreciate any hand holding you can give me!
If SSL CANNOT be enabled for Sonarr, how can I reset this feature without access to the GUI?
If SSL CAN be enabled for Sonarr, what might I have done wrong?
I am fairly new to this stuff, appreciate any hand holding you can give me!
Model: TVS-463
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
-
- Know my way around
- Posts: 138
- Joined: Fri Aug 16, 2013 6:58 am
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
Just uninstall and reinstall the app.
-
- Know my way around
- Posts: 116
- Joined: Tue Jul 07, 2015 11:09 pm
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
I realize that I can do that, but I was hoping to not have to reconfigure Sonarr.
Can we confirm if Sonarr can be used with SSL?
Can we confirm if Sonarr can be used with SSL?
Model: TVS-463
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
-
- Know my way around
- Posts: 116
- Joined: Tue Jul 07, 2015 11:09 pm
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
Hi, I have attempted to uninstall and reinstall QSonarr via QTS to resolve the SSL issue. Unfortunately, I can no longer access the UI from either 127.0.0.1:8989 from HDMI out on my TVS-563 or from ipaddress:8989 from a browser on my laptop. I can not access via 9898 (SSL) ports either. Any help on how to uninstall and reinstall to fix this issue is appreciated.
Model: TVS-463
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
SSL is not working with Mono, you have to setup a HTTP proxy SSL in front of QSonarr
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Know my way around
- Posts: 116
- Joined: Tue Jul 07, 2015 11:09 pm
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
Right, I tried uninstalling and reinstalling to use without SSL. I can no longer access the UI. Not sure how to resolve this issue.QNAP_Stephane wrote:SSL is not working with Mono, you have to setup a HTTP proxy SSL in front of QSonarr
Model: TVS-463
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
I think go in admin homes with WinSCP ( on HAL models : /share/CACHEDEV1_DATA/homes/admin/.config/NzbDrone ) and delete contentssloporc wrote:Right, I tried uninstalling and reinstalling to use without SSL. I can no longer access the UI. Not sure how to resolve this issue.QNAP_Stephane wrote:SSL is not working with Mono, you have to setup a HTTP proxy SSL in front of QSonarr
and reinstall (or restart application)
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Know my way around
- Posts: 116
- Joined: Tue Jul 07, 2015 11:09 pm
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
This did not work for me. I did the following:QNAP_Stephane wrote: I think go in admin homes with WinSCP ( on HAL models : /share/CACHEDEV1_DATA/homes/admin/.config/NzbDrone ) and delete contents
and reinstall (or restart application)
- > uninstalled qsonarr from QTS interface
> rm -rf on all contents of the nzbdrone directory from mac terminal
> confirm all contents of directory deleted
> reinstalled sonar manually from QTS interface
Model: TVS-463
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
-
- Getting the hang of things
- Posts: 73
- Joined: Sun May 16, 2010 5:11 am
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
Are there any special steps required to install this (TS-651)?
1. Git
2. NZBGet
3. Qmono 3.10
4. QSonarr
Setup
is that it?
1. Git
2. NZBGet
3. Qmono 3.10
4. QSonarr
Setup
is that it?
TS-651 x86 8GB RAM
FW 4.3.3.0188
FW 4.3.3.0188
- Trexx
- Ask me anything
- Posts: 5388
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
You could use SABNzbd instead of NZBGet for #2, but otherwise looks like you have the basics down.
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
-
- Know my way around
- Posts: 116
- Joined: Tue Jul 07, 2015 11:09 pm
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
Went to the Sonarr forum. Investigated the logs and it appears that SQLite might be causing the issue.
Link to QSonarr log: http://hastebin.com/kilavihitu.1c
Edit: Issue closed. I uninstalled both Mono and Sonarr and installed the oldest versions of each qpkg that I could find posted on this forum. Sonarr works now, and I was then able to update to the latest version via in-app process.
Link to QSonarr log: http://hastebin.com/kilavihitu.1c
Edit: Issue closed. I uninstalled both Mono and Sonarr and installed the oldest versions of each qpkg that I could find posted on this forum. Sonarr works now, and I was then able to update to the latest version via in-app process.
Model: TVS-463
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
Firmware: QTS 4.3.3.0154
Storage: RAID 5, 4 x4TB HGST Deskstar HG0S03664
RAM: Crucial 16GB Kit (8GBx2) DDR3-1600 MT/s (PC3-12800)
Networking: Port trunking balance-tlb
-
- New here
- Posts: 4
- Joined: Tue Jul 03, 2012 5:54 pm
Re: [ QSonarr ] [ 1.150606 ] Smart PVR for newsgroup and bit
Hi all,
The Ramdisk issue is due to Sonarr using a hardcoded path to store the application data which is ~/.config/Nzbdrone - This equates to /root/.config/Nzbdrone which is on the Ramdisk. Once you start caching info for a lot of Series, it blows the Ramdisk space.
I managed to overcome the Ramdisk issue by creating a sym link for the Nzbdrone directory to a directory on /share/HDA_DATA.
There's also this solution which I haven't tried - http://forum.qnap.com/viewtopic.php?f=1 ... 66#p476566
Hope it helps.
Mark
The Ramdisk issue is due to Sonarr using a hardcoded path to store the application data which is ~/.config/Nzbdrone - This equates to /root/.config/Nzbdrone which is on the Ramdisk. Once you start caching info for a lot of Series, it blows the Ramdisk space.
I managed to overcome the Ramdisk issue by creating a sym link for the Nzbdrone directory to a directory on /share/HDA_DATA.
There's also this solution which I haven't tried - http://forum.qnap.com/viewtopic.php?f=1 ... 66#p476566
Hope it helps.
Mark
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QSonarr ] [ 1.150720 ] Smart PVR for newsgroup and bit
Ok just release a version, to fix this problem
last version create a QSONARR_CONFIG directory in your share path and force use this directory to put your config files, pid, logs ....
also updated to last Master branch
Tested on TS-453PRO seems running fine, let me know
previous users who already installed, should move the current files to this new directory, or rebuild their configuration...
last version create a QSONARR_CONFIG directory in your share path and force use this directory to put your config files, pid, logs ....
also updated to last Master branch
Tested on TS-453PRO seems running fine, let me know
previous users who already installed, should move the current files to this new directory, or rebuild their configuration...
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- New here
- Posts: 4
- Joined: Tue Jul 03, 2012 5:54 pm
Re: [ QSonarr ] [ 1.150720 ] Smart PVR for newsgroup and bit
Works a treat. Thanks
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QSonarr ] [ 1.150720 ] Smart PVR for newsgroup and bit
thanks for your feedback
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------