[QPKG] sherpa: a mini-package-manager (CLI) beta
-
- Getting the hang of things
- Posts: 68
- Joined: Mon Aug 03, 2015 8:15 am
Re: [SCRIPT] sherpa
Looks that same but the ID number
You do not have the required permissions to view the files attached to this post.
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: [SCRIPT] sherpa
That's the process identifier, it will change on every launch of CP.cotten wrote:Looks that same but the ID number
The rest does look the same. Hmm... it's a noodle-scratcher. I'm almost out of time now, but I'll do some research today and see if I can find out why yours looks different.
You might also try asking about this on the CouchPotato forum.
For posterity, can you please post your sherpa debug log - but only the section where you installed CouchPotato?
-
- Getting the hang of things
- Posts: 68
- Joined: Mon Aug 03, 2015 8:15 am
Re: [SCRIPT] sherpa
Yea, I'm going play around with.
-
- Getting the hang of things
- Posts: 68
- Joined: Mon Aug 03, 2015 8:15 am
Re: [SCRIPT] sherpa
So a little messing around, I had to complete uninstall couch, and reinstate a different package, and then update from this forum.
viewtopic.php?f=269&t=130572&p=600789&h ... ed#p609351
But go it working. I think my case is a one off because I had issue with CP before which is why I'm doing a fresh install.
Time to work on post processing.
viewtopic.php?f=269&t=130572&p=600789&h ... ed#p609351
But go it working. I think my case is a one off because I had issue with CP before which is why I'm doing a fresh install.
Time to work on post processing.
- dirkonline
- Easy as a breeze
- Posts: 305
- Joined: Mon Oct 18, 2010 4:08 pm
Re: [SCRIPT] sherpa
I am using 7071 for Sickbeard right now, so it won't be an issue. If I remember correctly back when I set up Sickbeard there was a conflict with something else and I had to change it. But as you said, less options is more and the automated approach works beautifully so farOneCD wrote:What port are you using for SickBeard? The default for the SickRage QPKG is 7073. If your SB is on a different port, then you can install SR alongside SB. That's how I did it a few weeks ago when I was re-creating all my shows in SR.dirkonline wrote:Considering that some, like me, might use your skript to install Sickrage alongeside an existing Sickbeard installation and want to keep both active until the new installation works as intended.
Would it make sense to include a parameter to set Sickrage to use a specific port for the webinterface? What are your thoughts on this?
In keeping with the 'fully-automated' theme for this script, I've not included any user-interactions or parameters for the user to set (well, except for specifying --debug) as it adds complexity. Once you ask a user for input, you have to perform type-validation and bounds-checks. And if - someday - this script is integrated into the QPKG pre-start functions, the user won't have any way to specify parameters.
-
- Getting the hang of things
- Posts: 68
- Joined: Mon Aug 03, 2015 8:15 am
Re: [SCRIPT] sherpa
Thanks, OneCD. Everything is working again...
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: [SCRIPT] sherpa
Great! Sounds like you worked it out.cotten wrote:But go it working. I think my case is a one off because I had issue with CP before which is why I'm doing a fresh install.
edit: ah, you did.
It'd be awesome to import all the SB setting into SR, but I read somewhere there have been too many changes to the DB for this to happen. Fortunately, I found that the SR process to examine and import existing shows from disk works very well. It helps if you were naming your shows in SB with the season and episode number, and source and resolution.dirkonline wrote:I am using 7071 for Sickbeard right now, so it won't be an issue. If I remember correctly back when I set up Sickbeard there was a conflict with something else and I had to change it.
- dirkonline
- Easy as a breeze
- Posts: 305
- Joined: Mon Oct 18, 2010 4:08 pm
Re: [SCRIPT] sherpa
It'd be awesome to import all the SB setting into SR, but I read somewhere there have been too many changes to the DB for this to happen. Fortunately, I found that the SR process to examine and import existing shows from disk works very well. It helps if you were naming your shows in SB with the season and episode number, and source and resolution. [/quote]dirkonline wrote:I am using 7071 for Sickbeard right now, so it won't be an issue. If I remember correctly back when I set up Sickbeard there was a conflict with something else and I had to change it.
Oh I have been doing that anyway via Sickbeard in order to allow Kodi (formerly XBMC) to read it all properly. I will set Sickrage up this weekend with your script and then do a side by side until I have all my shows in Sickrage and then turn off Sickbeard.
- FizzNuts
- Getting the hang of things
- Posts: 65
- Joined: Thu Jan 07, 2016 5:12 am
Re: [SCRIPT] nzb-multi-installer
I completely agree that QSonarr is way better than Sickrage. more stable, easier to use, easier to configure.Xmantium wrote:Are you able to put this on GitHub so others can input into it?
Any chance Sonarr can be added? Its way better than Sickrage, try and see for yourself
nzb-multi installer is a confusing name, think its best to put "Sabnzbd+ and Addons Installer" would be a better fit
Jesse
Model: TS-453A 16GB FW: 4.3.3.0404 Build: 20171213
Disks: [RAID-5] 4 x 3TB HGST DeskStar NAS
Media Boxes: XBOX One, Yamaha Aventage Receiver
Model: TS-453A 16GB FW: 4.3.3.0404 Build: 20171213
Disks: [RAID-5] 4 x 3TB HGST DeskStar NAS
Media Boxes: XBOX One, Yamaha Aventage Receiver
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
- FizzNuts
- Getting the hang of things
- Posts: 65
- Joined: Thu Jan 07, 2016 5:12 am
Re: [SCRIPT] sherpa
Oh I know, and they are WONDERFUL!
Jesse
Model: TS-453A 16GB FW: 4.3.3.0404 Build: 20171213
Disks: [RAID-5] 4 x 3TB HGST DeskStar NAS
Media Boxes: XBOX One, Yamaha Aventage Receiver
Model: TS-453A 16GB FW: 4.3.3.0404 Build: 20171213
Disks: [RAID-5] 4 x 3TB HGST DeskStar NAS
Media Boxes: XBOX One, Yamaha Aventage Receiver
-
- Starting out
- Posts: 26
- Joined: Tue Aug 30, 2016 1:00 pm
Re: [SCRIPT] sherpa
Those of you unhappy with the instability of Sickrage but not wanting to move to Sonarr shoud take a look at Sickgear. Absolutely rock solid. I run it via autorun - no qpkg - but I'm sure someone with more skills than me could produce one.
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: [SCRIPT] sherpa
Oh geez, not another fork...
Can you bullet-point the differences for those of us (like me) who don't what what they are?
Can you bullet-point the differences for those of us (like me) who don't what what they are?
- dirkonline
- Easy as a breeze
- Posts: 305
- Joined: Mon Oct 18, 2010 4:08 pm
Re: [SCRIPT] sherpa
I used your script last night to install Sickrage. It worked just fine, no errors at all. It even took the API Key from Sabnzdb+ which was a nice touch. Now I just have to work my way through this and get the post processing set up. Any tips on that? I had a search last night and found plenty of pages of various ages but it all seemed a bit mixed up and all over the place.
- OneCD
- Guru
- Posts: 12161
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: [SCRIPT] sherpa
Using Clinton's nzbToMedia scripts, a large part of post-process configuration is handled by /share/Download/nzbToMedia/autoProcessMedia.cfg. You'll need to check that the [SickBeard] section is configured for your setup.
Also ensure your SAB setting for 'scripts folder' is [/share/Download/nzbToMedia]. This is something else I can automate - just have to remember to do it when my PC is nearby.
edit: changed ref from [SickRage] to [SickBeard]
Also ensure your SAB setting for 'scripts folder' is [/share/Download/nzbToMedia]. This is something else I can automate - just have to remember to do it when my PC is nearby.
edit: changed ref from [SickRage] to [SickBeard]
Last edited by OneCD on Thu May 11, 2017 4:05 pm, edited 1 time in total.