In Need of HDD Tray Screws For QNAP TS-421
-
- Starting out
- Posts: 22
- Joined: Mon Oct 31, 2016 2:13 am
Re: In Need of HDD Tray Screws For QNAP TS-421
I checked the eBay link and they don't ship to the United Kingdom. In regard to a support ticket how would I explain that my eBay second hand bid winning didn't come with the screws. QNAP sell the screws for $31 or £25 for a quantity of 96 on their online shop, but that seems very expensive for some small screws.
-
- Been there, done that
- Posts: 898
- Joined: Mon Jun 03, 2013 3:33 am
Re: In Need of HDD Tray Screws For QNAP TS-421
Production :
TVS-673 4.3.4 0387
4 X 3TB WD RED : 1 X 4TB HGST DESKSTAR R5
32GB
LAN-10G1SR-D, FiberHal for Cisco SFP-10G-SR
NETGEAR ProSAFE SS3300-28X
Backup :
TS-469L 4.3.4 0387
4 X 3TB WD RED R5
3GB
Located detached garage .. cheap offsite solution ...
2nd TS-469L awaiting drives and reassignment for front-line duty .......
TVS-673 4.3.4 0387
4 X 3TB WD RED : 1 X 4TB HGST DESKSTAR R5
32GB
LAN-10G1SR-D, FiberHal for Cisco SFP-10G-SR
NETGEAR ProSAFE SS3300-28X
Backup :
TS-469L 4.3.4 0387
4 X 3TB WD RED R5
3GB
Located detached garage .. cheap offsite solution ...
2nd TS-469L awaiting drives and reassignment for front-line duty .......
-
- Been there, done that
- Posts: 720
- Joined: Fri Oct 23, 2009 6:52 pm
Re: In Need of HDD Tray Screws For QNAP TS-421
Anyone found a reasonably priced source for these yet?
QNAP TS-639 Pro (3.8.1 Build 20121205) | 6 x 3 TB (Toshiba DT01ACA300 firmware MX6OABB0) | 12 TB RAID-6
Both shared over single port GbE and wifi router to Linux, Android, Windows, macOS and NVIDIA Shield
Both shared over single port GbE and wifi router to Linux, Android, Windows, macOS and NVIDIA Shield
-
- Starting out
- Posts: 16
- Joined: Tue Jan 06, 2009 3:56 am
Re: In Need of HDD Tray Screws For QNAP TS-421
The exact screws are #6 UNC 3/16" long countersunk with a phillips head
i think these are the screws i found on ebay are the ones we all need they look the same but the above screw configuration is exact
https://www.ebay.co.uk/itm/Computer-PC- ... 2749.l2649
number 5 UNC will probably fit too but they have to be 3/16 long otherwise they poke out from the drive tray and stop it closing
hope this helps
i think these are the screws i found on ebay are the ones we all need they look the same but the above screw configuration is exact
https://www.ebay.co.uk/itm/Computer-PC- ... 2749.l2649
number 5 UNC will probably fit too but they have to be 3/16 long otherwise they poke out from the drive tray and stop it closing
hope this helps
-
- Starting out
- Posts: 22
- Joined: Mon Oct 31, 2016 2:13 am
Re: In Need of HDD Tray Screws For QNAP TS-421
Cheers for sharing that link. I will certainly buy them especially being that cheap next time I'm in need of screws for a QNAP NAS.
-
- First post
- Posts: 1
- Joined: Tue Dec 22, 2020 12:00 am
Re: In Need of HDD Tray Screws For QNAP TS-421
Here's another source in Germany where I ordered today:
https://www.zollshop.de/de/Zollschraube ... -verzinkt/
I will keep you informed after fitting them in my TS-231P 3,5" HDD trays.
https://www.zollshop.de/de/Zollschraube ... -verzinkt/
I will keep you informed after fitting them in my TS-231P 3,5" HDD trays.