Hello,
On previous versions of QTS I could create a virtual switch with the main LAN and QKVM (ending up with a bridge).
Even with such a bridge/virtual switch I could modify DNS settings, VLAN, etc. now the option to do so says "cannot edit configuration when it is part of a virtual switch".
How would one go about changing vlan and dns settings?
Another one, why don't dhcp client include domain and search directives in resolv.conf?
Thank you
Virtual Switches on QTS 4.3.3
- dynek
- Experience counts
- Posts: 1651
- Joined: Wed Sep 22, 2010 4:58 pm
- Location: Peney/Vuiteboeuf, Switzerland
-
- First post
- Posts: 1
- Joined: Mon May 08, 2017 8:18 pm
Re: Virtual Switches on QTS 4.3.3
I have the same issue. Any fixes?
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Virtual Switches on QTS 4.3.3
Which build of 4.3.3 are you running? Can you post a screenshot of how you are trying to make those changes?
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
- dynek
- Experience counts
- Posts: 1651
- Joined: Wed Sep 22, 2010 4:58 pm
- Location: Peney/Vuiteboeuf, Switzerland
Re: Virtual Switches on QTS 4.3.3
I'm running 4.3.3.0154 Build 20170413
Screenshot:
https://www.dropbox.com/s/9yai6d880empb ... .jpeg?dl=0
Now when I try to configure Virtual Switch 1, there's no way to change either the DNS settings or VLAN.
Thank you
Screenshot:
https://www.dropbox.com/s/9yai6d880empb ... .jpeg?dl=0
Now when I try to configure Virtual Switch 1, there's no way to change either the DNS settings or VLAN.
Thank you
Last edited by dynek on Wed May 10, 2017 5:32 pm, edited 1 time in total.
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Virtual Switches on QTS 4.3.3
I can't see your screenshot, but I would try updating to the latest b174 of 4.3.3 as it seems to be more stable for most people as well as having security patches.
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Virtual Switches on QTS 4.3.3
You are trying to make the change in the wrong place. You have to do an Edit on the vSwitch (not the interface), and the 2nd screen will let you change the properties.dynek wrote:I'm running 4.3.3.0154 Build 20170413
Screenshot:
https://www.dropbox.com/s/9yai6d880empb ... .jpeg?dl=0
Now when I try to configure Virtual Switch 1, there's no way to change either the DNS settings or VLAN.
Thank you
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
- dynek
- Experience counts
- Posts: 1651
- Joined: Wed Sep 22, 2010 4:58 pm
- Location: Peney/Vuiteboeuf, Switzerland
Re: Virtual Switches on QTS 4.3.3
I know (well, QNAP leads me to Virtual Switch anyway) but as I say "Now when I try to configure Virtual Switch 1, there's no way to change either the DNS settings or VLAN.".
If I edit/configure Virtual Switch (1 in this case), I am going through:
- step 1/4: Select the devices for the Virtual Switch
- step 2/4: Set up the Virtual Switch IP address
- step 3/4: Set up the Virtual Switch service (NAT / DHCP server)
- step 4/4: Confirm Virtual Switch settings
None of these steps allow me to change either DNS or VLAN.
If I edit/configure Virtual Switch (1 in this case), I am going through:
- step 1/4: Select the devices for the Virtual Switch
- step 2/4: Set up the Virtual Switch IP address
- step 3/4: Set up the Virtual Switch service (NAT / DHCP server)
- step 4/4: Confirm Virtual Switch settings
None of these steps allow me to change either DNS or VLAN.
- dynek
- Experience counts
- Posts: 1651
- Joined: Wed Sep 22, 2010 4:58 pm
- Location: Peney/Vuiteboeuf, Switzerland
Re: Virtual Switches on QTS 4.3.3
Trying to bump this thread as latest versions still do not allow changing dns/vlan settings (I know this is a user forum but we never know).
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Virtual Switches on QTS 4.3.3
Bridge virtual switches don't have DNS and VLAN, your adapter does. So configure those settings PRIOR to creating/adding the NIC to your virtual switch. If you need have different NICs on different VLANs, you would need to create seperate vSwitches for each NIC/Vlan.
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
- dynek
- Experience counts
- Posts: 1651
- Joined: Wed Sep 22, 2010 4:58 pm
- Location: Peney/Vuiteboeuf, Switzerland
Re: Virtual Switches on QTS 4.3.3
OK so that's expected that once configured and put inside a virtual switch (bridge) dns and vlan cannot be changed anymore. Weird but fair enough, I'll take it as it is.
Do you know any way of adding vlans on an interface so that multiple vlans could be used (for virtual machines purposes)?
I can do it from command line but not sure how QTS will react.
Thank you for your help
Do you know any way of adding vlans on an interface so that multiple vlans could be used (for virtual machines purposes)?
I can do it from command line but not sure how QTS will react.
Thank you for your help
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Virtual Switches on QTS 4.3.3
To my knowledge, QNAP doesn't support multiple VLANs on an interface. Again remember this is a specialized "appliance" OS, not a wide-open linux distribution.
So if you needed multiple VLANs, as far as I know - separate NICS/vSwitch pairs. I would submit a helpdesk ticket though to get an "official answer".
So if you needed multiple VLANs, as far as I know - separate NICS/vSwitch pairs. I would submit a helpdesk ticket though to get an "official answer".
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq